Congratulations
to the purchase of your new Grip-Lock®
Thank you very much for deciding to use our product. Please read these instructions before using your Grip-Lock®.
Contents
•One Grip-Lock®
•Two keys
•Three adapter pads (small / medium / large)
Instructions
Select two adapter pads and push them into the Grip-Lock®. They should grip the throttle tightly.
If you like, you can glue these in place.
Squeeze the sides of the slider together and move it in position – by positioning the slider, you can choose having the brake open, partly engaged or fully locked.
Place the Grip-Lock® over your throttle grip, close it and push in the lock – no key is required to engage the Grip-Lock®.
To open, simply insert the key and twist it clockwise 1/4 of a turn. The lock cylinder pops out and you can now
remove the Grip-Lock®.
Loading...