Aztech MT402 User Manual

Download

MT402

Aztech Air Purier

USER MANUAL

PLEASE RETAIN THIS USER MANUAL FOR FUTURE USE.

SAFETY INSTRUCTIONS

Remove the power plug before doing any maintenance, cleaning,

or relocation of the appliance.

Do not use wet hands to operate the appliance, and insert or

remove its power plug to prevent electrical shocks. It is suggested

to thoroughly dry your hands before operating the Air Purier.

Do not obstruct the wind outlet/inlet of the appliance. Doing so will

reduce the Air Purier’s air cleaning efciency.

The Air Purier is not a toy; hence it is prohibited for children to play

with the appliance in order to prevent damage. A Child Safety lock

has been provided for such instances.

Do not sit or stand on the appliance.

When an operating irregularity occurs, please unplug the power

and send the appliance to the maintenance center for repair.

When unplugging the power plug, do not pull its cord. Hold the

power plug properly on its base to unplug it from the power outlet.

Do not place ANY OBJECT on top of the Automatic Lifting Cover.

Position the Air Purier on a smooth and stable ground. Placing the

appliance on unstable surfaces such as softly cushioned carpets or

sofa, may make the appliance lose its balance.

Do not use the appliance near water resources or volatile ammable

items to prevent electrical shocks.

Do not position the appliance in hot places or in places commonly

exposed to multiple sources of heat such as refrigerators or

computers.

Should damages be found in the appliance, please do not use the

appliance and immediately send the appliance to the maintenance

center for repair.

Do not place any ammable materials near the appliance, or

position the Air Purier in an enclosed location where these materials

are present

Do not rinse the appliance with water.

When cleaning, use a soft, dry cloth to wipe the appliance gently,

or use a small brush to softly clean the wind inlets and outlets.

Do not clean the appliance with any type of acid-based solutions

to prevent damage and electric shock.

•

PACKAGE CONTENTS

1) Air Purier

2) Remote Control

3) User Manual

AIR PURIFIER FEATURES

1. Control Panel. Displays the controls and Indicator Lights

Button Conguration. Features the built-in control buttons of the Air Purier

Automated Lifting Cover. Automatically opens and closes when you turn the

appliance ON/OFF. Always ensure this cover is NEVER blocked.

Hidden Handle. Provided to help you carry the appliance. Please note that

these handles are hidden with handle covers on the side.

Filters. Filters all contaminants and is composed of Initial, HEPA, and Activated

Carbon Filter.

TiO2 Photocatalyst (Titanium Oxide). Completely decomposes bacteria and

viruses, converting these harmful contaminants to harmless CO2 and H2O.

Base. A non-slip pad that supports the Air Purier.

8. Air Inlet. Untreated-air passes into these inlets (with two on each side). These

inlets should always remain UNOBSTRUCTED.

Rear Cover. Power will be cut off automatically if the rear cover is removed.

Always keep the rear cover SECURELY CLOSED.

10.

Brushless DC Motor. Is highly efcient and energy saving. Compared with a

Air Purier

4) Warranty Card

Remote Control

INDICATORS and BUTTONS

common motor, the Brushless DC Motor saves up to 30%-40% of energy, with

longer lifespan and less noise.

11.

Odor Sensor. Detects the current odour in your room to identify it as Good

Air, Moderate Air, and Poor Air, and switches to a corresponding speed after

detecting its quality.

12.

Dust Sensor. Detects dust particles bigger than 1um present in your room,

and switches to the best cleaning mode which can clean effectively.

13.

Ionizer. Generates negative ions known as “vitamins in the air” that cleans

the air, allowing the indoor atmosphere to become fresher and cleaner.

14.

ON/OFF Switch. Switches the Air Purier ON or OFF.

15.

Speed Options. Adjust the speed of the Air Purier (Low, High, Turbo, Sleep)

16.

Child Safety Lock. Disables the built-in controls of the Air Purier.

17.

Sleep Mode. Enables the lowest noise producing mode of the Air Purier.

18.

Auto-mode. Enables automatic speed shifting through detected air quality.

19.

Timing Options. Shifts the hours of operation of the Air Purier (1H / 4H/ 8H)

5 - STEP OPERATION & USE

STEP 2: Position it PROPERLY

Place the Air Purier on a smooth and stable ground. Ensure that there are no ammable

materials near the appliance, and that the Air Inlets are not blocked by any object and are 25cm away from walls.

25cm

*Smooth and Stable

STEP 3: Plug it to a Power Outlet

Plug the Air Purier to a 220V power outlet.

STEP 4: Power it ON

On the BUTTON CONFIGURATION of the Air Purier or on its REMOTE CONTROL, press the ON/OFF button to turn ON or to turn OFF

the Air Purier.

STEP 5: Choose the Cleaning Mode

Either select your cleaning mode by (1) pressing the Wind Speed button to shift between the different modes, or (2) by pressing the Automatic Mode Button to set it Auto mode.

STEP 1: Unpack the Filters

Place both hands at the rounded bottom corners of the rear cover and pull it upwards to open the rear cover. Remove the plastic

covers of the lters and place it back again.

CARE and CLEANING

Cleaning the Initial Filters

The initial lters are hand washable and are RECOMMENDED to be cleaned or replaced when the Air Purier has reached 100 to

300 hours of work (depending on room air quality).

Replacing the Filters

Unplug the Air Purier and place both

hands at the rounded bottom corners of the rear cover and pull it upwards.

Pinch the white belts on the lters, and pull all of the 4 lters out.

Replace new lters with the white belts

facing outwards. The INITIAL FILTERS on the other hand, should face its respective air inlet.

Place the rear cover from top to bottom and ensure that the middle and bottom part is tightly sealed.

FREQUENTLY ASKED QUESTIONS

Question 1: My Air Purier is not working

Check if the Power is ON. Press the ON/OFF button to turn ON the Air

Purier

Check if the plug is loose or broken. Try reconnecting the power plug to the power outlet.

Check if the Rear cover is installed correctly. The Air Purier would not

turn ON if the Rear Cover is lose.

Question 2: The air coming out of has an odour

The lters are carrying too many dusts particles. Please change the lters of the Air Purier. It is also possible that the lter’s lifespan has expired. Please change the lters of the Air Purier.

Question 3: The Air Purier does not perform well

Your room might be too dry or is not properly ventilated. You may

slightly open the room’s door or window/s to increase indoor

humidity. Check if the air inlets and the automatic lift cover do not have any blockage or is not blocked by any object. If these are blocked,

change the location of the air purier, or remove the external objects

blocking the inlets.

Question 4: The Remote Control is not working

You might have exceeded the control range. Try moving closer to

the Air Purier.

Check if the batteries are installed (CR2032/5004LC batteries). Check if the batteries are installed correctly. Check if the batteries are already dead. Replace it with new CR2032/ 5004LC batteries.

Question 5: I have just replaced the lters but the Filter Replacement Reminder is still blinking

After changing the lters, press the Speed Options Button for 3 seconds to reset the lter timer.

Question 6: I have an Air Purier problem not listed here

Please visit www.aztech.com/support. Feel free to call us or send us an email with the contact details provided on our site. Our customer service representatives would willingly help you with your problem.

•

Aztech MT402 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual