AXTON AT-3M-S Quick Setup Guide
Quick Setup Guide Nano IR
RoHS
AT-3M-S, AT-5M-S
WIRING
OPTION 1 Constant ON
AXTON Illuminators have been designed and tested to run 24/7
continuously both indoors and outdoors.
Apply Power
Jumper
OPTION 2 Automatic
Illuminator will trigger ON/OFF using the built in ambient light sensor
which has been pre-set to a threshold of 5-15 lux. ON will trigger
immediately while OFF will trigger after a 12-18 second delay.
ORANGE
GREEN
WHITE/BLUE
WHITE/BROWN
BROWN
BLUE
Power In Positive +
Power In Negative –
IN
Day/Night
OUT
Digital GND
TO / FROM ILLUMINATOR
TTTTTTT
ILLUMINATE THE NIGHT
Make all electrical connections
BEFORE applying power.
VOLTAGE INPUT
12-18 Volts DC
Polarity Sensitive
Apply Power
Jumpers
ORANGE
GREEN
WHITE/BLUE
WHITE/BROWN
BROWN
BLUE
Power In Positive +
Power In Negative –
IN
Day/Night
OUT
Digital GND
TO / FROM ILLUMINATOR
Applying voltage other than the required range may
cause permanent damage and VOID WARRANTY.
WARNING! Infrared light is not visible. Do not view directly with optical
instruments (magnifiers) or stare directly into the illuminator at close distance
Do not attempt to open or modify the light as this will void the warranty.
If you need a modification, electric or physical, contact us directly. We will let
you know if it can be done. All changes MUST be made at our factory.
OPTION 3 External Controller (e.g. Camera)
You will need to log into the camera via computer and program the I/O ports to trigger when IR illumination is desired.
Apply
Power
TO/ FROM CAMERA
ORANGE
GREEN
WHITE/BLUE
WHITE/BROWN
BROWN
BLUE
Power In Positive +
Power In Negative –
IN
Day/Night
OUT
Digital GND
TO / FROM ILLUMINATOR
To switch illuminator ON, your camera output port(s)
have to be ACTIVE and set to LOW (GND-ground).
You may associate this action with various events
(IR cut filter, motion detection, etc.) available on
your camera or external device.
QUESTIONS ? (801) 519-0500 or support@axtontech.com │ www.axtontech.com
801 West Robinson Drive, Suite 500, North Salt Lake, UT 84054
q801/519-0500 < 801/519-0501 %sales@axtontech.com
Made in the USA
Lifetime Warranty
Loading...