Axis P3807-PVE Configure in AXIS Camera Station (ACS)

October 7, 2021
Rev. 1.0

© Axis Communications AB

HOW TO.

Configure AXIS P3807-PVE with

AXIS Camera Station

How To.

Configure AXIS P3807-PVE with AXIS Camera Station

2

Contents

Introduction 3
About dewarped and client dewarp capture modes 4
Using the 7.5MP (16:9) forensic WDR (dewarped) @ 12.5/15 fps capture mode 4

How to configure AXIS P3807-PVE 4
How to add AXIS P3807-PVE to AXIS Camera Station 5
How to configure streaming profiles in AXIS Camera Station 7
Recommended setup 8

Using the 8.3MP (9:4) forensic WDR (client dewarp) @ 25/30 fps capture mode 9

How to configure AXIS P3807-PVE 9
How to add AXIS P3807-PVE and configure in AXIS Camera Station 9
Recommended setup 9

Considerations and limitations 10

How To.

Configure AXIS P3807-PVE with AXIS Camera Station

3

Introduction

This document will fo c u s o n w h at t o conside r whe n using th e AXIS P3807 -PVE
Network Camera with the AXIS Camera Station, as well as, how to configure the
camera and the VMS to obtain the best optimal performance for th e two supported
capture modes:

• 7.5MP ( 16:9) forensic WDR (dewarped) @ 12.5/15 fps

• 8.3MP ( 9:4) forensic WDR (client dewarp) @ 25/30 fps

Please note that Axis doesn’t take any responsibility for how this configuration may affect your
system. If the modification fails or if you get other unexpected results, you may have to restore the
settings to default.

Prerequisites

AXIS P3807-PVE

AXIS Cam e ra S tation 5.20 or later