Axis Camera Station Installation

INSTALLATION GUIDE

AXIS Camera Station

About this Guide

This guide is intended for administrators
and users of AXIS Camera Station, and is
applicable for software release 4.0 and later.
It covers the installation of AXIS Camera
Station Server and AXIS Camera Station
Client as well as instructions for using and
managing AXIS Camera Station on your
network. Later versions of this document
will be posted to the Axis Website, as
required. See also the product’s help pages.

Intellectual Property Rights

Axis AB has intellectual property rights
relating to technology embodied in the
product described in this document. In
particular, and without limitation, these
intellectual property rights may include one
or more of the patents listed at
http://www.axis.com/patent.htm and one or
more additional patents or pending patent
applications in the US and other countries.

Legal Considerations

Camera surveillance can be prohibited by
laws that vary from country to country.
Check the laws in your local region before
using this product for surveillance purposes.

Liability

Every care has been taken in the
preparation of this manual; Please inform
your local Axis office of any inaccuracies or
omissions. Axis Communications AB cannot
be held responsible for any technical or
typographical errors and reserves the right
to make changes to the product and
manuals without prior notice. Axis
Communications AB makes no warranty of
any kind with regard to the material
contained within this document, including,
but not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Axis Communications AB shall not
be liable nor responsible for incidental or
consequential damages in connection with
the furnishing, performance or use of this
material.

Trademark Acknowledgments

AXIS COMMUNICATIONS, AXIS, ETRAX,
ARTPEC and VAPIX are
registered trademarks or trademark
applications of Axis AB in various
jurisdictions. All other company names and
products are trademarks or

registered trademarks of their respective
companies.
Microsoft, Windows, WWW, Internet
Explorer, DirectX, Intel, Intel Core and Xeon
are registered trademarks of the respective
holders.

Support

Should you require any technical
assistance, please contact your Axis
reseller. If your questions cannot be
answered immediately, your reseller will
forward your queries through the
appropriate channels to ensure a rapid
response. If you are connected to the
Internet, you can:

• download user documentation and
software updates

• find answers to resolved problems in the
FAQ database. Search by product,
category, or phrase

• report problems to Axis support staff by
logging in to your private support area

• chat with Axis support staff (selected
countries only)

• visit Axis Support at

www.axis.com/techsup

AXIS Camera Station Installation Guide Page 3

AXIS Camera Station

Installation Guide

System recommendations

For the latest information and recommendations for different system sizes and
supported operating
available on

systems, see the hardware guidelines and release notes

www.axis.com/techsup

Page 4 AXIS Camera Station Installation Guide

Overview

This Installation Guide provides instructions for installing AXIS Camera Station.

The installation includes AXIS Cameras Station Client and AXIS Camera Station
Server. AXIS Cameras Station Client provides access to recordings and live video
and can be installed on the same computer as the server or on a different
computer. It is recommended to install AXIS Camera Station Server on a
dedicated computer for best performance and stability.

AXIS Camera Station is a mo
advantage of Axis network cameras and video encoders. For a detailed
description of the software, see the built-in help files and AXIS Camera Station
User Manual. The User Manual is available on www.axis.com

nitoring and recording system optimized to take full

AXIS Camera Station Installation Guide Page 5

Install AXIS Camera Station Software

The software can be installed from the Internet or from the CD.

From the Internet:

1. Go to www.axis.com/products/video/software and create an account.

2. Download the latest version of AXIS Camera Station and

3. Go to Start the installation.

From the CD:

1. Insert the CD in the CD drive. If the installation CD does not start
automatically, click start.exe in the CD’s root folder.

2. From the CD’s interface, select AXIS Camera Station, select the
Software tab and click Install Software.

3. Go to Start the installation.

Start the installation:

1. Select the language to install.

ENGLISH

Note:

You may be prompted to:

• install .NET Framework. Follow the Installation Wizard’s instructions

• update the computer’s graphics card driver.

2. Read and accept the license agreement.

3. Select where to install the program or accept the default folder.

4. Select components to install from the drop-down list. Full installation
includes AXIS Camera Station Client and Server. If you intend to install
AXIS Camera Station Server on another computer you can choose to
install only AXIS Camera Station Client.

Add exceptions fo

5.

6

. Follow the final steps in the Installation Wizard.

r AXIS Camera Station to the Windows Firewall.

Page 6 AXIS Camera Station Installation Guide

Network Configuration

AXIS Camera Station can record and play back video from cameras and video
encoders that are connected to a LAN (Local Area Network) or to a WAN (Wide
Area Network). Depending on the installation, follow the instructions under
Network & Security Configuration in AXIS Camera Station User Manual.

Start AXIS Camera Station Client

To start AXIS Camera Station Client:

Click on the AXIS Camera St

go to AXIS Camera Station Client in the Windows start menu.

When starting the Client for the first time, the Client automatically attempts to
log on to the AXIS Camera Station Server installed on the same computer as the
Client.

Server installed on another computer

To log on to an AXIS Camera Station
Server that is installed on another
computer than the AXIS Camera Station
Client:

1. Select Remote server and enter
the address or hostname of the
AXIS Camera Station Server to
connect to.

2. Click Log On. The Credentials
dialog opens.

3. Select Log on as current user or enter your User name and Password.

4. Click OK.

ation desktop icon to start AXIS Camera station or

If the Server is configured to accept Clients on a different port than the default port

Note:

55752, enter the address followed by the port number. For example, 192.168.0.5:46001

AXIS Camera Station Installation Guide Page 7

Configure Client Proxy Settings

If AXIS Camera Station Client and AXIS Camera Station Server are separated by
a proxy server, the client proxy settings need to be configured:

1. From the Log On screen, click Change client proxy settings in the lower
right corner.

2. Enter the proxy settings. Click Help for a description of the options.

AXIS Camera Station Activation

The first time you start AXIS Camera Station you will be asked to select and
activate a license.

•Select Licensed Version to install purchased licenses and activate

the AXIS Camera Station software.

•Select Trial to activate a free version with full functionality but

limited to 30 days.

•Select AXIS Camera Station One to activate a free version with

limited functionality (only one video channel).

The purchased software includes a base license for 4 or 10 cameras and
optional upgrade licenses

A purchased License Key can only be used for one installation. The License Key is
your proof of purchase. Keep it in a safe place for future reference.

To find the status of your licenses, activation dates and expiry dates for grace
periods and support go to Options > Licenses.

MyAxis (www.axis.com/reg) also shows your registered licenses and activation
dates.

for additional video channels (1, 5 or 20).

ENGLISH

Page 8 AXIS Camera Station Installation Guide

Internet connection: Register automatically

If AXIS Camera Station is installed on a computer with Internet access you can
register automatically. Your license information is sent directly to the Axis Web
server.

1. Select Licensed Version and click on the OK button.

2. Select the option The server is connected to the Internet and fill in the
requested information. The License Key is found in the AXIS Camera
Station CD casing. Click Register.

3. Install the remaining purchased licenses.

4. The license information will be sent to Axis Communications and your
software will be activated automatically.

5. You can now start using AXIS Camera Station.

AXIS Camera Station Installation Guide Page 9

No Internet connection:

Register manually

If AXIS Camera Station is installed on a computer without (or with low-speed)
access to the Internet, you can acquire the Access code that is needed to
activate the software from the Axis Web site and enter it manually.

1. Select Licensed Version and click on the OK button.

2. Select the option The server is not connected to the Internet and enter
the License Key.

3. Click Activate.

ENGLISH

Page 10 AXIS Camera Station Installation Guide

4. A dialog opens with the Server ID, make a note of it. You will need the
Server ID when filling in information on the Internet form to receive an
Access code. Note that you must type the Server ID exactly how it was
displayed.

5. If you have received the access code, click Activate Now. Otherwise click

Activate Later to use AXIS Camera Station in Grace mode for 5 days.

Activate licenses in Grace mode

During the grace period you can receive the Access code by using any computer
with Internet access. Browse to www.axis.com/techsup/acs, fill in the requested
information and click Submit. You will be given an access code.

1. When you have received the access code, start AXIS Camera Station
Client and select Yes in the License Registration dialog.

AXIS Camera Station Installation Guide Page 11

2. Click Grace activation in the Licenses dialog.

3. Enter the Access code. License Key and Server ID are filled in
automatically.

ENGLISH

4. Click Activate Now.

Switch to Licensed Version

If you are currently running the Trial version or AXIS Camera Station One and
wish to switch to the full version of AXIS Camera Station, you can register your
license by selecting Options > Licenses from the main menu.
Follow the instructions for “Internet connection: Register automatically”
described on page 8 or “No Internet connection: Register manually” described on
page 9.

Page 12 AXIS Camera Station Installation Guide

Get Started

When starting AXIS Camera Station for the first time, Get Started with
AXIS Camera Station is started automatically. Get Started with AXIS Camera
Station provides a quick way to add cameras and to configure and enable

recording:

1. Select cameras and video encoders to add.

2. Select recording methods and where to store recordings.

3. Review settings and click Finish to add cameras and start recording.

For more information, see the built-in help and AXIS Camera Station User
Manual.

Navigate in AXIS Camera Station Client

AXIS Camera Station Client is divided into workspaces. To navigate between
workspaces, click the buttons in the toolbar.

Live View - Live video from connected cameras and video encoders.

Recordings - Search, play and export recordings.

Camera Management - Administration and maintenance of

connected devices. For more information, see the online help.

Logs - Alarm, event and audit logs.

Configuration - A collection of the most important configuration

settings.

Copyright © Axis Communications AB, 2004-2015

November 2015 AXIS Camera Station Installation Guide Rev. 10.3
Part No. 58950