Axis C03 Instruction Manual

INSTRUCTION MANUAL

C03

WATERPROOF REAR CAMERA

1/3” SURFACE MOUNT with NIGHT VISION

Universal Number Plate / Boot / Car Panel Mount

BUILT FOR

AUSTRALIAN

CONDITIONS

MOBILE SAFETY

SPECIFICATIONS:

- Image Sensor: 1/3” CMOS PC1089

- Lens Angle: 120°

- Effective Pixels: 728 x 488

- Resolution: 500 TV Lines

- TV System PAL

- Night Vision: 9 IR LEDs

- Min Illumination: 0.3 Lux (Day), 0 Lux (with IR)

- Image: Mirror/Normal Selectable

- Protection: IP67 Dust and Waterproof

- Dimension: ø31mm

- Current Consumption: 150mA Max

- Input Power: 12V DC

- Operating Temp: -30° - 70° C

- Connection: RCA

2.

CAR REARVIEW CAMERA

GENERAL:

After installation, the rear view system will automatically activate
when reverse gear is selected. This provides a clear image for the
driver as a protection for children, pedestrians and property from
injury and damage. It also avoids costly repairs to your vehicle from
towing or parking.

CAMERA:
This stealth camera can be mounted on the number plate or other
panel. The RCA video cable simply connects with most aftermarket
LCD Monitors.

INSTALLATION:

• Carefully choose the installation position (usually rear-centre of
vehicle)

• Carefully drill hole for mounting screws (avoid fuel tank or cables)

• Connect RED cable to 12V+ power cable of Reversing Light

• Connect BLACK cable to ground

• Connect YELLOW RCA cable (video) to LCD Monitor

MIRROR/NORMAL IMAGE:

Camera

Mirror normal jumper switch.

Install switch for normal image -
used for front camera application.
Leave jumper switch disconnected for reverse image ­used for reversing applications