Axis AX-SLM Installation Manual

SALAMANDER (ELECTRIC) AX-SLM

USER’S MANUAL

PRODUCTION YEAR: SERIAL NO

3096790

MVP GROUP CORPORATION 5659 ROYALMOUNT MONTREAL, QC. CANADA H4P 2P9

Tel: [phone] Fax: [phone]

www.mvpgroupcorp.com www.axis-equipment.com

PUBLISHED ON : 09.05.2009

Page1 of 13

TABLE OF CONTENTS

PAGE NR. TOPICS

1 COVER PAGE
2 TABLE OF CONTENTS
3 INTRODUCTION
4 TECHNICAL DATA

5 ELECTRICAL CIRCUIT DIAGRAM / MAIN DIMENSIONS
6 WARNING SIGNS
7 SAFETY DETAILS
8 TRANSPORTING AND MOVING
9 INSTALLATION OF THE APPLIANCE

10-11 OPERATION OF THE APPLIANCE

12 TERMS OF WARRANTY

CAUTION

This appliance should only be used in facilities where standards,

local safety codes and regualtions are followed.

2/13

INTRODUCTION

Dear User,

Thank you for purchasing our AXIS product and for your confıdence in our

company. Our appliances are produced in compliance with international

standards. IMPORTANT: Please read and ensure that all users read this

manual in order to achieve the desired performance that you expect; and to

enable you to use this AXIS appliance for many years.

☞ Please read and ensure that your operation personnel read this user’s

manual carefully before installing and using the appliance.

☞ The manual containing information about installation, usage and

maintenance of our product you purchased should be read carefully.

Please ensure that power supply connections to the appliance are

already installed by qualified personnel according to local regulations,

before our authorized service arrive for any service work to this

appliance. If our authorized service determines that the necessary

repair(s) to be done are a result of the faulty installation on your part,

the warranty shall not be covered.

☞ If you do not have enough information, please

contact our customer

service department either by phone at

1-514-737-9701 or e-mail at:

[e-mail]

☞ We expect you to have the best performance

from our product!

3/12

TECHNICAL DATA

YOUR PRODUCT'S TYPE

MAIN DIMENSIONS (inches) 23.6” x 24.0” x 22.8”

TOTAL ELECTRICAL INPUT (kW) 3,6

POWER SUPPLY VOLTAGE (V) 220

WORKING FREQUENCY (Hz) 60

NET WEIGHT (Lbs) 114

AX-SLM

4/13

ELECTRICAL CIRCUIT DIAGRAM

H1

KLEMENS

N
L1

S1

R1

CODE COMPONENTS

S1 Strom regulator

MAIN DIMENSIONS

23.6”

H1 appliance ON lamp
R1 Heating Element

24.0”

22.8”

5/13

WARNING SIGNS

PE

POWER NETWORK GROUNDING

POWER

POWER SUPPLY CONNECTIONS

208/220V / 60 Hz / 1

GROUNDING

OVERHEAT

6/13

SAFETY DETAILS

☞ The appliance should only be operated under a
hood.

☞ Any kind of flammable solid and liquid material
(cloths, alcohol and derivatives, petrochemical products,
wooden and plastic materials, cutting blocks, curtains
etc.) should never be held near the appliance.

☞ You can use this appliance simultaneously together
with other products

☞ Do not clean up the appliance with pressure water

☞ This appliance should be installed in line with

effective regulations and only be operated in well
ventilated places. Please refer to the instructions before
installing and operating the appliance.

☞ This appliance is designed for industrial use and
should only be operated by personnel trained on the
appliance.

☞ The appliance should not be handled by

unauthorized person except for the manufacturer or

authorized service.

☞ In case of fire or flame in the area where the appliance is
operated, act without panic, close gas valves, turn off the
power switches and use a fire extinguisher. Never use water
to extinguish the fire.

7/13

TRANSPORTING AND MOVING

CHANGING THE LOCATION;

Machines installed by an authorized service CANNOT BE MOVED
ELSEWHERE, ITS POWER SUPPLY CABLES CANNOT BE
EXTENDED OR REPLACED except by an authorized service.

☞ Before transporting device should be disconnected from
power.

☞ Do not hit or drop the device when moving.

8/13

OPERATION OF THE APPLIANCE

1. Salamander is used in kitchens of restaurants, fast food stands, canteens, hospitals in

order to fry, grill or roasting of food.

2. Before initial use of the appliance, the outer surface should be wiped with a cloth
soaked in warm water and soap.

NOTE: Do not use except purpose of use. The appliance should be operated by

qualified personnel knowing safety terms and technical specifications and who

has read the instruction manual.

CAUTION !

NEVER OPERATE YOUR appliance

WITHOUT GROUND CONNECTION.

Take the Salamander carefully out of its package.

Turn the starter switch step by step to set relevant operating temperature. Green lamp
will light.

You may smell a fume and odor during first ever operation of the appliance.
This smell will due to the first operation of the appliance and will diminish after a while.

The heaters are located in the top moving component. This top component moves up
and down very easily. Its height is adjustable.

Food to be fried should be placed on the grill. Food to be cooked on tray should be

placed on oil pan.

.
Dishes or trays to be used for serving fried foods should stand, up to maximum

572°F.Dishes and trays that could melt should not placed into the device.

After frying is completed, dishes or trays should be handled with gloves, when taking

them out.

Turn the commutator to “0” position after daily use.

Disconnect the appliance from the power supply. Clean up the appliance after
disconnecting it from the power supply.

It is recommended to operate the appliance between temperatures of

+41ºF +104ºF and in ambient humidity of maximum 65%.

10/13

OPERATION OF THE APPLIANCE

CAUTION! : The appliances should be installed and

operated as described in this user’s manual. If any

failure is encountered please contact our nearest

authorized service dealer.

WHEN THE appliances HAS A FAILURE ONLY

AUTHORIZED MVP GROUP CORP. SERVICE DEALERS

ARE ALLOWED TO HANDLE THE APPLIANCES. IF

ANY PERSON OTHER THAN ONLY AUTHORIZED

SERVICE DEALERS HANDLE THE APPLIANCES, IT

WILL NOT BE COVERED BY THE WARRANTY.

NEVER ALLOW PEOPLE WHO ARE NOT AUTHORIZED

TO HANDLE THE APPLIANCE. OTHERWISE MVP

GROUP CORP WILL NOT BE RESPONSIBLE FOR THE

CONSEQUENCES. DURING MAINTENANCE SERVICE

OUR AUTHORIZED SERVICE DEALERS SHOULD NOT

BE PROPOSED TO USE NON-ORIGINAL SPARE

PARTS FOR WHATSOEVER. INSTALLING ANY NON-

ORIGINAL SPARE PART TO THE APPLIANCE

VOIDSTHE APPLIANCE OUT OF WARRANTY

COVERAGE.

11/13

OPERATION OF THE APPLIANCE

CLEAN-UP AND MAINTENANCE

Clean-up and maintenance must be performed by the

operator

Before the power is switched on and after the first and

every subsequent use, the outer surface of the appliance

should be wiped clean with sponge and liquid detergent.

Do not use cleaning agents like hydrochloric acid or any

abrasive cleaning agents.

INFORMATION ABOUT OPERATIONAL FAILURE

FAILURES AND TROUBLESHOOTING:

If no heat is generated within the appliance, check
the power supply or breaker for electrical current. If
the appliance is connected to the power supply, the

reason may be that the on-off switch is not turned

on. If the appliance still

does not operate, please call our customer service

department at:

1-514-737-9701 or contact us by e-mail at:

[e-mail]

11/12

MANUFACTURERS LIMITED WARRANTY

MVP Group Corporation (MVP), hereby warrants all new equipment bearing the

name “AXIS” and installed within the continental United States of America or

Canada to be free from defects in material and workmanship, under normal and

regular usage and operation, for a period of one (1) year following the date of original

installation; or to a maximum of eighteen (18) months from factory date of shipment.

If a defect in material(s) or workmanship is detected; or found to exist within the stated

period above, MVP, at its sole discretion, shall either repair or replace any original

equipment manufacturers part which has proven to fail within the machine; providing

that the equipment has not been altered or tampered with in any form or manner

whatsoever, has been installed correctly as per the users manual, and

maintained and operated in complete accordance with this manual.

The labor cost (in terms of bench warranty) to repair or replace any part proven to be

defective, as per above clause(s), shall be covered by MVP, within the continental

United States of America or Canada; provided that prior authorization for this labor

was approved by MVP, the service work was performed by an authorized MVP service

agency; and that this agency installed an original and a genuine AXIS part in

the machine. Any repair work performed by a non-authorized service depot remains

the sole responsibility of the user, and thus MVP cannot be held responsible. The

installation of any generic part will not be valid; and therefore will void

this warranty. All authorized labor coverage shall be limited to bench rates only. Any

supplemental hourly rates or charges, such as transport, weekends or

emergency premiums remain the sole responsibility of the user.

Any charges exceeding those stated herein must have prior authorization by MVP.

Exceptions to above warranty are: (A) Damages resulting from shipping,

handling or abuse (B) Incorrect installation and/or connections (C) Adjustments or

calibration of any parts (D) Faults due to lack of regular maintenance or cleaning of

any internal part(s) (E) Replacement of any wearable items such as

accessories (F) Discoloration of any components due to chemical reaction

MVP GROUP CORP. STATES THAT THERE ARE NO OTHER WARRANTIES,

EXPRESSED OR IMPLIED, THAT ARE NOT SET FORTH HEREIN. MVP

GROUP CORP. SHALL ASSUME NO OTHER RESPONSIBILITY, EITHER DIRECT

OR NON-DIRECT, OR BE LIABLE FOR ANY OTHER OR ADDITIONAL LOSS

OR DAMAGE WHETHER BEING DIRECT OR CONSEQUENTIAL, AS A RESULT

OF ITS EQUIPMENT.

The manufacturer reserves the rights to alter design and specifications without notice

12/12