Axis Parking Violation Detection How-to-guide ACS integration for AXIS Parking Violation Detection

November 6, 2019
Rev. 1.0

© Axis Communications AB

HOW TO.

Configuration of AXIS Parking

Violation Detection on AXIS

Camera Station

How To.

AXIS Parking Violation Detection,

AXIS Camera Station integration guide

2

Contents

Introduction 3

Step 1 –Installation and Configuration 4

Step 2 - Add the camera to AXIS Camera Station 4

Step 3 – Configure a Device Event trigger 4

Step 4 – Configure the actions – Raise alarm and Record Alarm 6

Step 5 – Configuration validation 9

How To.

AXIS Parking Violation Detection,

AXIS Camera Station integration guide

3

Introduction

AXIS Parking Violation D et ection is designed t o automatically detect veh icl es parked
in ill egal or forb idden areas without relying o n hum an judgement. It’s ideal for
survei llance in cities, at airports or private parking f acilities – anywhere you need
fas t and precise, round-the-clock video-monitoring.

The follo w ing do c u ment hig h lig h t s how to integrate AXIS Parking Violation
Det ection application with AXIS Camera Station’s event system.

This guide assumes that AXIS Parking Violation Detection app has been installed a nd
confi g u r ed.

The do c ument explains how to:

- Conf i gure an AXIS Camera Station rule t o trigger an event.

- Verify that the configuration is done correc tly.

This follo w ing configuration has been tested with the following products and
firmw are:

Please note that Axis doesn’t take any responsibility for how this configuration may affect your
system. If the modification fails or if you get other unexpected results, you may have to restore
the settings to default.

Prerequi si t e s

AXIS Parking Violation Detection V1.0.1

AXIS Camera Station 5.27.195

AXIS P1 4 45 -LE f irmware LTS 8.40.2