AXEON S-100 User Manual

S-100 Membrane Antiscalant Concentrate

Pr

odu

ct

Appearance

Specific Gravity

pH

(2% in water)

mg/L (neat), control of a

wide range of inorganic scales at up to 100 x saturation

Instructions

For shipments overseas and to large

water treatment plants AXEON S-100 Antiscalant Concentrate is
provided as an eight (8) fold concentrate. The concentrate is diluted with seven (7) volumes of purified
water to form S-100 Antiscalant Concentrate.

AXEON Antiscalant Concentrate is a highly effective antiscalant, specially formulated for feedwaters with
highest levels of metal oxides, silica and scale-forming minerals. It is effective over a wide range of
concentrations, and does not flocculate dissolved polymers such as residual coagulants of iron or
aluminum-rich silica. Use of this product is recommended for reducing the operating and capital costs of
reverse osmosis (RO), nanofiltration (NF) and (UF) ultrafiltration systems. A special utility is in its
application as a substitute for pretreatment with ion exchange beds.

S-100

Concentrate

S-100 Application Dosing Recommendations

S-100 Antiscalant Concentrate should
be injected into the feedstream prior
to the static mixer and cartridge filter.
Effective pH range is 3-13. If frozen,
may be thawed and mixed before
use. Stability is excellent, but best
used within 12 months.

Clear, colorless, aqueous solution 1.45 ± 1.05

In the useful dosage range of 1 – 45
values or higher is possible. By monitoring the concentrate

stream and trend charts, optimal dosage can be achieved for
the control of scales including that from calcium carbonate,
calcium sulfate, barium sulfate, strontium sulfate, iron
hydroxide, aluminum hydroxide and silica.

2.5 Maximum

*MSDS available on our website

MKTF - 244

Packaging

5-gallon pails and 55-gallon drums