AW-Lake RT-30 Specifications
RT-30SD - FLOW TRANSMITTER WITH LOCAL DISPLAY
Ideal for any industry or ow measurement application where a local rate and total display is required and in
locations where equipment is exposed to the elements.
FEATURES
FEATURES:
• Available in single and dual access models
• Can be mounted directly on flow meter or in remote location
• HART® communication protocol option for remote monitoring and programming
monitoring and programming
TECHNICAL SPECIFICATIONS
BENEFITS
Options for Remote Indication
The RT-30 has options for remote flow monitoring:
• Frequency pulse output (standard)
• 4-20mA, user scalable (standard)
• HART communication protocol (optional)
Easy Field Programming
Flow rate or total can be easily programmed to
display in choice of engineering units. To program
the unit simply use the magnet that is attached. No
opening of the enclosure is required.
Remote Mounting Available
The RT-30 can be mounted remotely when used
in conjunction with any AW frequency output
sensor.
Up and Running in Minutes
A quick setup procedure allows you to have
the flow monitor working with just a few simple
programming steps.
Flexiable Mounting
The RT-30 unit can be rotated 360° for optimal
viewing from any angle. Options available to fit any
AW Gear Meter or Turbine Meter.
Weather-Proof Enclosure
NEMA 4X enclosure provides environmental
protection from moisture and debris.
Power Requirement
9-24 VDC / 200mA (customer supplied)
Class 2
Analog Output 4-20mA
• PWM converter
• 3- or 2-wire plus separate supply
• Max load impedance 500 ohm
Frequency Output
Three Opto-Isolated Open-
Collector Outputs:
• Programmable for frequency or limit
outputs
• 5-30 VDC rating
• 40 mA max (min. load impedance
required 600 Ohm @ 30 VDC)
PART NUMBER GUIDE
RT - 30SD -
Enclosure style:
D = Dual access
S = Single access
T = Single access,
316 stainless steel
Sensor:
00 = None*
(Remote Mount)
02 = HUB-40SD1-S5-H2
11 = MAG-PB
31 = CAPM-15
41 = MG-300
42 = MG-450
81 = IR-PB
* Requires external sensor
Built in 30 point Linearizer
Sensor/Monitor Frequency
Range
0-4,500 Hz
Temperature Rating
-20 to 60°C (-4 to 140°F)
Connection
3/4” female NPT conduit provisions
One Opto-Isolated Input
9-24 VDC remote reset
Communication Protocol:
“blank” = none
H = Hart®
COMPANY
2440 W. Corporate Preserve Dr, #600, Oak Creek, WI 53134 | www.aw-lake.com
©2016 AW-Lake Company. All rights reserved. Doc ID:RT30SDDS16
RT-30SD - FLOW TRANSMITTER WITH LOCAL DISPLAY
Ideal for any industry or ow measurement application where a local rate and total display is required and in
locations where equipment is exposed to the elements.
SINGLE ACCESS ENCLOSURE (SHOWN HERE WITH HUB-40 SENSOR)
5.00in
127mm
2.42in
61.50mm
7.66in
194.65mm
DUAL ACCESS ENCLOSURE (SHOWN HERE WITH HUB-40 SENSOR)
5.02in
127.52mm
7.71in
Products may be subject to change without noce - Contact factory for the most up-to-date product informaon.
7.99in
203.01mm
©2016 AW-Lake Company. All rights reserved. Doc ID:RT30SDDS16
Loading...