AW-Lake MicroFlow Specifications
MICROFLOW - POSITIVE DISPLACEMENT GEAR METER
Ideal for ow measurement of low and medium viscosity uids (solvents, polyurethanes, oils and other non-abrasive
uids) at very low ow rates, as in chemical injection.
APPLICATIONS
AW Gear Meters offers these spur gear positive displacement flow meters that are
suitable for a variety of applications:
BENEFITS
Accurate & Reliable
This meter has the ability to maintain consistent
accuracy despite changing viscosity conditions,
with accuracy of +0.5% of reading or better. Low
friction gears and bearings allow for accurate
measurement of low viscosity fluids, down to 1cP
(custom calibration recommended).
• Chemical injection skids
• Fuel & solvent measurement
• Liquid seal bead dispensing
• Cylinder position measurement
TECHNICAL SPECIFICATIONS
Measuring Accuracy
± 0.5% or better, 10:1, ≥30cP
Flow Measuring Range
0.0005 to 0.25 gal/min
Maximum Operating Pressure
5,000 psi
Maximum Fluid Temperature
Depends on sensor used, refer to sensor
tech guide.
MATERIALS OF CONSTRUCTION
Body
Gear & Ball Bearings
O-Ring
Sha
RECOMMENDED SENSORS
• Batching
• Low flow applications to 2 cc/min
(0.0005 gal/min)
Repeatability
± 0.1%
NPT Female Ports
Bi-directional flow capability
Certifications
ATEX approved, non-sparking, CSA
Class 1, Div. 1
316 Stainless Steel
Stainless Steel
PTFE (other options available)
420 C Stainless Steel
Rugged Construction
This PD meter’s solid construction of 316 stainless
steel body and stainless steel gears & bearings
stand up to the most rugged environments.
Flexible
Meter may be used in applications requiring bidirectional flow.
Simple to Install & Use
Installation is easy because there is no need for
straight run piping upstream or downstream of the
flow meter.
Certified
Sensors are available with ATEX non-sparking or
CSA Class I, Div. 1.
COMPANY
Model Sensor Type Sensor Features
EX Meters
HUB-40-Ex Hazardous area rated sensor CSA/CUS cered pulse output hall
eect single sensor
RT-30Ex Hazardous area rated ow
transmier
Non EX Meters
FIP-xx Meter mounted analog output
sensor
MAG-xx Hall eect single sensor Frequency output with conduit
RT-30SD Local ow rate transmier Rate & local display with 4-20mA
2440 W. Corporate Preserve Dr. #600, Oak Creek, WI 53154 | www.aw-lake.comawinfor
Rate & local display with 4-20mA
analog output
3-wire analog output, current or
voltage
connecon
analog output
©2016 AW-Lake Company. All rights reserved. Doc ID: MICRODS16
MICROFLOW - POSITIVE DISPLACEMENT GEAR METER
Ideal for ow measurement of low and medium viscosity uids (solvents, polyurethanes, oils and other nonabrasive uids) at very low ow rates, as in chemical injection.
METER DATA
Meter Type Range
(gal/min)
JVS-01UF-25-NPT .0005-.25 151,300 40 3.3 2.2 4 1/4”
JVS-01UF-25-NPT-EX.0005-.25 151,300 40 3.3 2.2 4 1/4”
Impulse/
gallon
Impulse/ ccDiameter
(inches)
Height
(inches)
Weight
(lbs)
Ports Filtraon
NPT
NPT
Pressure
(micron)
<10 5000
<10 5000
Rang (psi)
©2016 AW-Lake Company. All rights reserved. Doc ID: MICRODS16
Loading...