AW-Lake JVS-SLG Specifications

SLG - POSITIVE DISPLACEMENT SPUR GEAR METER

Ideal for measuring paints & coatings, especially where robotics are utilized or when space is limited.

APPLICATIONS

BENEFITS

In production environments like the automotive
industry, a lot of pressure is on line components.
While performing under a variety of harsh, fast­paced conditions, flow meters in particular have
to be rugged, accurate, and easy to install.

AW Gear Meters exceeds these demands with
its SLG Series Positive Displacement Flow

TECHNICAL SPECIFICATIONS

Measuring Accuracy

± 0.5% over 10:1 turndown with 30cP
fluid

Repeatability

± 0.1%

Flow Measuring Range

0.003 to 0.5 gpm

0.01 to 1.0 gpm

0.02 to 2.0 gpm

Meters. These stainless steel meters
feature small, light bodies, perfect for
installation on robotic arms and in other
tight areas. Flow meter construction
incorporates virtually no “dead space,”
which allows for extremely efficient flush
cycles and worry-free color changes.

Maximum Operating Pressure

up to 2,000 psi

Maximum Fluid Temperature

350°F (180°C)

Ports

Bottom ported through hole or 1/8”
BSPP – specify upon ordering

BENEFITS

Strong, Compact Design

The SLG’s solid stainless steel construction and
compact size make this meter ideal for robotic
applications where there is limited space, weight
restrictions and vibration from movement.

Simple to Install & Use

These meters are easy to use and install, since
there is no need for straight run piping upstream or
downstream of the flow meter.

Accurate and Reliable

This meter has the ability to maintain consistent
accuracy despite changing viscosity conditions, with
accuracy of +0.5% of reading.

Flexible

Meter may be used in applications requiring bi­directional flow, and is offered in three different
flow ranges (0.003 to 2.0 GPM).

MATERIALS OF CONSTRUCTION

Body

Gears

Seals

Bearings & Sha Tungsten Carbide

JVS: 316 stainless steel (2,000 psi max)
Stainless Steel, DIN 1.4122
JVS: PTFE O-ring

RECOMMENDED SENSORS

Sensor Type Model Sensor Features

Single sensor CAPM-3o

Fiber Opc System

(includes the following:)

Fiber opc sensor

Light-to-frequency
converter

Standard heavy-duty ber
opc cable

FOP 30/S

FOP-30 Fully isolated opcal signal, intrinsic safe

OPTV-20 Converts opcal output to frequency output

Fiber opc
cable

Intrinsically safe, frequency output (when
used with a barrier)

Available in 30, 40, 60 & 100 foot lengths

COMPANY

2440 W. Corporate Preserve Dr. #600, Oak Creek, WI 53154 | www.aw-lake.com

©2016 AW-Lake Company. All rights reserved. Doc ID: SLGDS16

SLG - POSITIVE DISPLACEMENT SPUR GEAR METER

Ideal for measuring paints & coatings, especially where robotics are utilized or when space is limited.

METER DATA

Meter Size

JVS-10SLGS 0.003-0.5 100,300 26.5 2.75 / 1.25 1/8” BSPP 120 2,000 psi

JVS-10SLGFS 0.003-0.5 100,300 26.5 2.75 / 1.25

JVS-15SLGS 0.01-1.0 31,000 8.2 2.75 / 1.25 1/8” BSPP 120 2,000 psi

JVS-15SLGFS 0.01-1.0 31,000 8.2 2.75 / 1.25

JVS-20SLGS 0.02-2.0 15,900 4.2 3.0 / 1.36 1/8” BSPP 120 2,000 psi

JVS-20SLGFS 0.02-2.0 15,900 4.2 3.0 / 1.36

Flow Range

(GPM)

Impulses/

Gallon

Impulses/

cc

Weight

(Lbs / Kg)

Ports

6 mm
(not threaded)

6 mm
(not threaded)

6 mm
(not threaded)

Filtration
(microns)

120 2,000 psi

120 2,000 psi

120 2,000 psi

Pressure

Rating

A COMMON APPLICATION
FOR THE SLG GEAR METER IS
IN ROBOTIC PAINT LINES IN
THE AUTOMOTIVE INDUSTRY.

©2016 AW-Lake Company. All rights reserved. Doc ID: SLGDS16