AW-Lake JV-CG Specifications
JV-CG - POSITIVE DISPLACEMENT SPUR GEAR FLOW METER
Ideal for highly accurate, yet cost-eective metering of paints and industrial uids.
APPLICATIONS:
Great for metering non-lubricating, small-particle fluids of medium to high viscosity. These
include paints, adhesives, sealants, and resins.
JV-CG series meter bodies and gears are constructed of stainless steel. Shafts and bearings are
made of strong tungsten carbide. The result is long lasting service and precision operation.
Sophisticated sensors provide highly accurate fluid monitoring. Sensor choices are frequency
output or analog output, including fiber optic and intrinsically safe models.
FEATURES:
• Easy to clean and maintain
• Accuracy: ± 0.5% of reading
• Flow ranges from 0.001 GPM to 20 GPM
• Pressure rating up to 5000 PSI
• Available in six flow ranges
• Stainless steel construction
• Non-intrusive pulse, mA, and voltage-output sensors
• Bi-directional flow capabilities
BENEFITS
Economical & Reliable
This meter has the ability to maintain consistent
accuracy despite changing viscosity conditions,
with accuracy of ±0.5% of reading.
Rugged Construction
The flow meter and gears are manufactured from
stainless steel with tungsten carbide shafts and
bearings.
Flexible
Meter may be used in applications requiring bidirectional flow, and is offered in six different flow
ranges (.001 to 20 GPM).
Output Options
Sensors available include frequency output, analog
output, fiber optic and intrinsically safe models.
TECHNICAL SPECIFICATIONS
Measuring Accuracy
± 0.5% over 10:1 turn down with 30cP
fluid
Repeatability
± 0.1%
Flow Measuring Ranges
0.001 to 0.25 gpm
0.003 to 0.5 gpm
0.01 to 1.0 gpm
0.02 to 2.0 gpm
0.1 to 7.0 gpm
0.1 to 20 gpm
MATERIALS OF CONSTRUCTION
Body
Gears
O-Ring
Bearing & Sha
Maximum Operating Pressure
up to 5,000 psi
Maximum Fluid Temperature
Depends on sensor used, refer to
sensor technical guide
Ports
NPT; BSPP available – specify upon
ordering
303 or 316 Stainless Steel
Stainless Steel
PTFE, FKM Optional
Tungsten Carbide
COMPANY
2440 W. Corporate Preserve Dr. #600, Oak Creek, WI 53154 | www.aw-lake.com
awinfor
©2016 AW-Lake Company. All rights reserved. Doc ID: JVCGDS16
JV-CG - POSITIVE DISPLACEMENT SPUR GEAR FLOW METER
Ideal for highly accurate, yet cost-eective metering of paints and industrial uids.
METER DATA
Meter Size Flow Range
(GPM)
JV#-01CG 0.001-0.25 155,000 41.0 3.0” 1.8 3.0 / 1.4 1/4” NPT 120 5,000 psi
JV#-10CG 0.003-0.5 100,300 26.5 3.0” 1.8 2.9 / 1.3 1/4” NPT 120 5,000 psi
JV#-15CG 0.01-1.0 31,000 8.2 3.3” 2.0 4.5 / 2.0 1/4” NPT 120 5,000 psi
JV#-20CG 0.02-2.0 15,900 4.2 3.3” 2.2 4.9 / 2.2 1/4” NPT 120 5,000 psi
JV#-30CG 0.1-7.0 6,600 1.7 3.3” 2.6 6.3 / 2.9 1/2” NPT 120 5,000 psi
JV#-60CG 0.1-20.0 1,800 0.47 4.9” 4.2 20.0 / 9.1 3/4” NPT 175 5,000 psi
# - Complete part # by selecng body material as follows: M=303 Stainless Steel, S=316 Stainless Steel
Impulses/
Gallons
Impulses/CC Diameter
(in)
Height
(in)
Weight
(Lbs/Kg)
Ports Filtraon
(microns)
Pressure
Rang
THE JV-CG GEAR METER UTILIZES A SLEEVE BEARING,
THAT IS EXTREMELY WELL SUITED FOR AUTOMOTIVE
PAINT LINES.
RECOMMENDED SENSORS
Sensor Type Model Sensor Features
Single sensor (standard)
Dual sensor w/ 2x resoluon
Hall eect single sensor
Meter mounted analog output sensor
Single sensor
High temp sensor
Local Mount Display
Local Mount Display
EX Versions available, consult factory.
HEF-xx Frequency output
DH-xx Single or quadrature frequency output
MAG-Px Frequency output, with conduit connecon
FIP-xxx 3-wire analog output, current or voltage
CAPM-xx Frequency output (intrinsically safe version also available)
CAPM-15 Separated pickup & amplier module, good up to 400°F for Stainless Steel
RT-10 Display ow rate total & grand total & baery powered
RT-30 4-20mA analog output, built-in 30-point linearizaon & displays ow rate
total and grand total
©2016 AW-Lake Company. All rights reserved. Doc ID: JVCGDS16
Loading...