Avycon AVR-EP908E-12T, AVR-EP908E-16T, AVR-EP908E-24T, AVR-EP908E-2T, AVR-EP908E-4T User Manual

iCMS

iCMS

User`s Manual

This document contains preliminary information and is subject to change without notice.

109

7. iCMS VIEWER

7.1 System Recommendations

Recommended
CPU
Main Memory
Video Memory
Display Resolution
HDD Storage Space
Network
Operating System

NOTE

It is recommended to connect Max. 16 HD-SDI (Full HD) cameras with iCMS.

WARNING

DUE TO A LIMITATION OF A MAC, CONNECTING MORE THAN 16 HD-SDI (FULL HD) CAMERAS MAY RESULT IN
MALFUNCTIONING OF THE SOFTWARE. TO CONNECT MORE THAN 16 HD-SDI (FULL HD) CAMERAS, PLEASE ENABLE
DUAL STREAMING OPTION ON THE DVR.

Core 2 Duo 2.26GHz or higher

2GB or higher

512MB or higher

1024ⅹ768 (with 32bit color) or higher

30GB or higher

100~1000 Mbps Fast Ethernet

Mac OS 10.6.0 or higher

7.2 Program Installation

 Please follow the program installation procedures below.
 Open the file ‘iCMS.dmg’.

 Virtual driver will be installed (Driver name is “iCMS”).

110

 In the virtual driver, users will find iCMS icon. Please move the iCMS icon to ‘Application’ folder (‘Application’ folder is

located in the ‘Go’ Menu below).

7.3 Login

 After installation of the software, iCMS icon appears in ‘Application’ folder.
 Please double Click on the icon to execute the program.
 Select User Name by Clicking upside down arrow and enter corresponding Pass word to login.

7.4 Watch Mode

7.4.1 Log-in Screen

 Please Click ‘Device manager’ and the following screen will display.

111

7.4.2 Local Setting

 Please Click ‘Setup’ button on the top of the Toolbar a nd the following screen will display.
 There are three types of setup such as Device Manager, Display Setup and Password Change.

7.4.2.1 Display Manager

 Please Click ‘Device manager’ and the following screen will display.

 Users will see the existing DVRs on the list, if there is any added DVR previously.
 Please Click ‘Add’ to add new device.

 Please type all the necessary information in the empty space and Click ‘OK’ to submit the devic e information
 Device Info

- Device Name: input the DVR site name which will be disp layed on the Server list. Please note that this name has nothing
to do with the ID registered in DVR. Users may create the name that is fairly easy to distinguish.

- Description: type brief description of the site

- IP Address: input IP address or Domain Name of DVR (check with SETUP>DEVICES>Network in DVR).

- Command Port: input Administrator’s number among port numbers set in DVR (check with SETUP>DEVICES>Network

in DVR). (Default, 5920)

- Stream Port: INPUT Video/Audio number among port numbers set in DVR (check with SETUP>DEVICES>Network in
DVR). (Default, 5921)

- User Name: Type authorized ID of the DVR. Default ID is admin.

- Password: Type corresponding password of the ID. Default Password is 1111.

- Confirm Password: Retype the password to confirm.

112

 If users want to scan the devices instead of typing the information manually, please Click ‘Scan device’. It will automatically

detect DVR units currently connected to local networks.

 Click “Scan Device”, then following ‘Dialog’ will pop up.

 Including IP address, the information of connected DVRs in the network will be listed.
 Select the one and Click ‘OK’. Then, the following window will pop up.

 Please fill out all the necessary information including Device name, Description (not mandatory), User Name and Password

and confirm password. Please note that the User Name and Password have to be same as the DVR setting.

 When users want to edit the existing device information, please choose the device and Click ‘Edit.
 When users want to delete the existing device information on the list, please select the device and Click ‘Remov e’.
 If users click the ‘Remove’ button, it will show the message below.

 Please Click the ‘OK’ button to remove the connected device

7.4.2.2 Display Setup

 Please Click ‘Display Setup’ and the following screen will display.

 Users can adju st and set the p eripheral values of the display window.

- Default Division: Users can select the number of division of display channels when the program initially starts the screen.
(1, 4, 9, 16, 25, 36 or 64).

- Users can choose either English or Korean in language setup.

NOTE

This option will be applied after program restarts.

113

 Date / Time format: Users can adjust and se t the mode of date / time display in accordance w ith the location .

- Date Format: select the date format among YYYY-MM-DD/MM-DD-YYYY/DD-MM-YYYY.

- Time Format: select the time format between 24Hours/ 12 Hours AM/PM.

 Display Font: Users can change the font of the name and display time of each channel.

- Font Type: select the type of font between Arial / Courier.

- Font Size: select the size of the font from 10 to 20 and the default is 15.

- Color: select the color among 16 different colors.

7.4.2.3 Password Change

 Please Click Password Change in setup menu to change the password. This ID and password is for opening the iCMS. This is

not related to any DVR’s login password

 Please select the ID from the drop down list and type original password.
 Please type new password and confirm the password below.
 If the information is filled out, click ‘OK’ to finish the Password change.

114

7.5 Live View

7.5.1 Connection

 Please choose one of the registered sites in Server list on the right hand side of the ‘Live Display’ screen and the right Click on

the mouse button will pop up the menu with ‘Connect’.

 Click ‘Connect’ to connect the DVR.

 To have multiple channels, please choose the channel from the bar below the ‘Live Display’ screen (1, 4, 9, 16, 25, 36, 64

and Full).

7.5.2 Display Mode

 Full Screen Mode: Select a channel and Click on number “1” button. Then, the corresponding channel will display in Full

Screen.

 Quad Screen Mode: Click on No.4 button and a quad screen will display. The quad screen is in combination of 1~4, 5~8, 9~12

and 13~16. If users select Channel No. 7 and Click the button, 5~8 quad screen will display. Similarly, if users select Channel
No. 16, 13~16 quad screen will display.

 9-Split Screen Mode: Click on No.9 button and 9-split screen will display. The 9-split screen is in combination of 1~ 9 and 8~16.

If users select Channel No. 9 and Click the button, 1~9 split screens will display. Similarly, if users select Channe l No. 10,
8~16 split screens will display.

 16-Split Screen Mode: Click on No.16 button and 16-split screens will display.
 25-Split Screen Mode: Click on No.25 button and 25-split screens will display.
 36-Split Screen Mode: Click on No.25 button and 36-split screens will display.
 64-Split Screen Mode: Click on No.64 button and 64-split screens will display.
 Seq: Click ‘Seq’ and then it will show an ordered list of display which will change the channel of live display to ne xt channels.

For example, In 4 channel display CH5 to CH8 on the display screen will change to CH9 to CH12 consequently.

115

NOTE

The selected channel is outlined in blue

7.5.3 Health Check

 Please choose one of the registered sites in Server list and the right Click on the mouse button will pop up the menu with

‘Health Check’.

 Please choose ‘Health check’ function when users want to check the status of the DVRs.
 Now users can choose either Health Check or Monitoring to see the status of the DVR at the bottom of the right corner.

 Health check shows the status of how many cameras are activated, how many HDDs are available, and how many channels

are recorded.

 Monitoring shows the status of the number of motion detection and how many alarm in and alarm out are activated.

①

Number Description

1 DVR name
2 Start and finish recorded date and time
3 The version of the firmware
4 The number of Connected network(ex. CMS, Mobile CMS, etc.) to the DVR

②

③

④

7.5.4 PTZ Control

 Under the server list, PTZ control can be found. This is for the control of Pan/Tilt/Zoom cameras.
 Buttons on the screen have the following functions.

- Up/Down/Left/Right direction buttons

116