Avtec VDD-P User Manual

Exhaust Make Up Air Canopy for All Types of Cooking Equipment
CHINOOK Value Ventilation
Description:
This low volume exhaust only canopy is UL 710 Listed for use over 400, 600 and 700°F cooking surface temperatures. The perforated supply air plenum can be shipped attached to the hood, or shipped loose to suit on-site job specic requirements. The front supply air plenum can provide up to 80% make-up air.
This hood is intended for use over all types of commercial cooking appliances. This model is recommended for all projects where energy consumption is a factor or when adequate make-up air is not available from the heating and cooling system.
Specifications:
Single shell canopy constructed of stainless steel on all exposed surfaces and aluminized steel on all non-exposed surfaces. Canopy shall be constructed using the standing seam method for optimum strength. Canopy shall have all welded exterior joints and seams. Canopy construction shall conform to NFPA-96 standards. All exposed welds are to be ground smooth and polished to match the nish requirements. Canopy is to meet NSF standards for construction and UL 710 standards for operation. Grease trough(s) to be easily removable and sloped to removable grease cup(s). Canopy comes complete with UL Listed globe style incandescent light xtures mounted on 36” center lines. Make-up air is introduced to the kitchen via a fully insulated ceiling mounted supply air plenum with stainless steel perforated discharge panels and with internal air diffusers to provide an even ow of air across the length of the hood. Make-up air collar(s) shall include air volume control damper. UL Listed bafe style aluminum grease lters shall run the entire length of the canopy and be easily removable for cleaning.
External MUA Filter
model VDD-P
Standard Features: Optional Accessories:
• Stainless steel construction on all exposed surfaces
• UL Listed globe style incandescent light xtures mounted on 48” center lines
• 3“ rear air space
• Removable grease trough & cup(s)
• Fixed location hanger brackets
• Exhaust collar installed
• Insulated ceiling mounted supply air plenum
1055 Mendell Davis Drive, Jackson, MS 39272 888-994-7636, unifiedbrands.net
Please reference our website for the most updated product information and specifications.
UL Listed stainless steel grease lters 14” Utility cabinet (mounted on end of canopy) Insulated 3” air space Electrical control panel Pre-plumbed re suppression Stainless steel top enclosures Light and fan switch Recessed incandescent and uorescent light xtures Stainless steel wall panel Stainless steel side skirts Melink Intelli-Hood® control systems Exhaust fan / cooking equipment interlock control UL Listed exhaust volume damper available on
all units with (2) exhaust collars
Sloped front design for low ceiling applications
Avtec CHINOOK Value Ventilation, Page 8a
PP SPEC1032 Rev. D
Revised 05/09
Model VDD-P
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered trademarks in the United States [and various other countries] of Unified Brands, a wholly-owned subsidiary of Dover Corporation.
NFPA-96
Model VDD-P
Light Duty Temperature Cooking Equipment – 400°F ( Medium Duty Temperature Cooking Equipment – 400-600°F ( Heavy Duty Temperature Cooking Equipment – 600°F ( Extra-Heavy Temperature Cooking Equipment – 700°F (
400 Degree Light Duty
Cooking Equipment
Exhaust CFM
Length
4’-0” 1000 8 x 12 1200 8 x 14 1400 8 x 16 2100 8 x 24 5’-0” 1250 8 x 14 1500 8 x 16 1750 8 x 20 2625 10 x 24 6’-0” 1500 8 x 16 1800 8 x 20 2100 8 x 24 3150 10 x 28 7’-0” 1750 8 x 20 2100 8 x 24 2450 8 x 28 3675 10 x 34 8’-0” 2000 8 x 22 2400 8 x 28 2800 10 x 24 4200 12 x 32
9’-0” 2250 8 x 26 2700 10 x 24 3150 10 x 28 4725 12 x 36 10’-0” 2500 8 x 28 3000 10 x 28 3500 12 x 26 5250 12 x 40 11’-0” 2750 10 x 24 3300 12 x 24 3850 12 x 30 5775 12 x 44 12’-0” 3000 10 x 28 3600 12 x 28 4200 12 x 32 6300 2-12 x 24
13’-0 3250 12 x 24 3900 12 x 30 4550 12 x 34 6825 2- 12 x 26 14’-0” 3500 12 x 26 4200 12 x 32 4900 12 x 36 7350 2- 12 x 28 15’-0” 3750 12 x 28 4500 12 x 34 5250 12 x 40 7875 2- 12 x 30 16’-0” 4000 2-10 x 18 4800 2- 10 x 22 5600 2-10 x 24 8400 2- 12 x 32
Length
4’-0” 800 12 x 12 960 10 x 20 1120 10 x 20 1680 12 x 24
5’-0” 1000 10 x 20 1200 10 x 20 1400 10 x 30 2100 12 x 24
6’-0” 1200 10 x 20 1440 10 x 30 1680 12 x 24 2520 10 x 40
7’-0” 1400 10 x 30 1680 12 x 24 1960 10 x 40 2940 10 x 40
8’-0” 1600 12 x 24 1920 10 x 40 2240 2-10 x 20 3360 2-10 x 30
9’-0” 1800 10 x 40 2160 10 x 40 2520 2-10 x 20 3780 2-10 x 40 10’-0” 2000 10 x 40 2400 2-10 x 20 2800 2-10 x 30 4200 2-10 x 40 11’-0” 2200 2-10 x 20 2640 2-10 x 30 3080 2-10 x 30 4620 2-10 x 40 12’-0” 2400 2-10 x 20 2880 2-10 x 30 3360 2-12 x 24 5040 2-10 x 40
13’-0 2600 2-10 x 30 3120 2-12 x 24 3640 2-10 x 40 5460 2-10 x 40 14’-0” 2800 2-10 x 30 3360 2-12 x 24 3920 2-10 x 40 5880 2-10 x 40 15’-0” 3000 2-12 x 24 3600 2-10 x 40 4200 2-10 x 40 6300 2-10 x 40 16’-0” 3200 2-12 x 24 3840 2-10 x 40 4480 2-10 x 40 6720 2-10 x 40
Note: Greater exhaust and/or lesser supply air ow rates may be required for each specic installation to obtain complete vapor and smoke removal. Note: Hoods over 15’-0”in length require two exhaust duct collars. Exhaust collar sizing is based on an average range of 1600FPM. Duct collars are located on centerline of canopy, unless otherwise specied. Hoods with double collars have them located on ¼ hood length lines unless otherwise specied. Canopy is to have a minimum 6” overhang on all exposed sides and the front leading edge to the perimeter of the cooking surface.
CFM @
.625 SP
CFM @ .25 SP
Duct Collar
Light Duty
Supply CFM
Duct Collar
Light duty ranges, roasters, ovens, steamers, etc.)
Rotisseries, ranges, grills, fryers, etc.)
Gas char-broilers, woks, upright broilers, etc.)
Solid fuel broilers)
400-600 Degree Medium Duty
Cooking Equipment
Exhaust CFM
CFM @
.75” SP
CFM @
.385” SP
Medium Duty
Duct Collar
Supply CFM
Duct Collar
600 Degree Heavy Duty
Cooking Equipment
CFM @
1.00”SP
CFM @ .50”SP
Exhaust CFM
Duct Collar
Heavy Duty
Supply CFM
Duct Collar
700 Degree Extra-Heavy
Duty Cooking Equipment
Exhaust CFM
CFM @
1.25”SP
Extra-Heavy Duty
CFM @
. 65”SP
Duct Collar
Supply CFM
Duct Collar
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered trademarks in the United States [and various other countries] of Unified Brands, a wholly-owned subsidiary of Dover Corporation.
NFPA-96
Page 8b
Loading...