AVSL DL-50 User Manual

DL-50 Analogue Delay Pedal

174.231UK

Functions

1. D. TIME – Adjusts the time interval of each delay

2. FEEDBACK – Adjusts the amount of delayed signal fed back into the delay line, varying the
number of repeats

3. D. LEVEL – Adjusts the balance between delayed and dry signal

4. Output – 6.3mm mono jack connector

5. D.C. In – DC jack for optional mains adapter

6. Input – 6.3mm mono jack connector

7. Indicator LED – Shows when effect is on (when it appears dim, replace battery)

8. Pedal Switch – Turns Effect On/Off

9. Battery housing – Compartment underneath for 9V battery

Notes on use

 Connecting to the Input jack enables the battery, please disconnect when not in use to

preserve the battery

 Before connecting to an instrument, ensure amplifier volume is turned down

Specifications

 Input Impedance: 1MΩ
 Output Impedance: >10kΩ
 Power Supply: 9Vdc (battery or optional mains adapter) 12mA

© chord 2009

www.chordmusicuk.com