AVSL DC1230UK User Manual

DC1230UK

12V Switch-mode Power Supply

Item ref: 660.447UK

User Manual

Function:

This energy efficient switch-mode power supply gives up to 3000mA at 12Vdc. Suitable for most
low power electronic products such as CCTV and LED installation tape.

Suitable for CCTV installation
Suitable for LED tape installation
Uses 25% less power making it more energy efficient
Materials used and manufacturing process are more environmentally friendly

Technical data:

Input Voltage: AC 100 - 240V 50/60Hz

Output Voltage: DC 12V

Output current: 3000mA max.

Adaptor plug size: 2.1mm + centre

Output power: 36W

Instructions:

1. Please read these instructions fully before using this apparatus.

2. For office equipment use only.

3. Check the housing and the mains cable for damage.

4. Connect the unit to be powered, check the polarity, voltage and connector size are correct

for your device, failing to do this, could result in damage to your equipment.

5. The unit to be powered must not draw more current than the maximum continuous

current of the power supply, in order to prevent overload. (The continuous current draw,
should be no more than 80% of the output current max.).

6. Plug the power supply into a wall outlet, the Red LED will light.

Warning:

1. For indoor use ONLY.

2. Risk of electric shock, do not open.

3. Do not install and operate the device in extreme heat, moisture or dusty environments.

4. Unplug the power supply when not in use.

5. The appliance is not intended for use by children or infirm persons without supervision.

6. This appliance is not intended for use by persons (include young children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.

7. Young children should be supervised to ensure they do not play with the appliance.

8. This unit is double insulated.

Disposal:

Please dispose of this device according to the current statutory requirements.

Errors and omissions excepted.

Copyright © 2013 AVSL Group Ltd.