AVSL CDM10-4 User Manual

CDM10:4

19” 4 Channel USB Mixer

Item ref: 171.135UK

User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

Introduction

Thank you for purchasing the Citronic CDM10:4 USB Rackmount DJ Mixer.
This product is intended to give long term, reliable service in normal usage.
Please read these instructions before use to avoid incorrect operation and to help outline the
functions and controls.

Maintenance

No user serviceable parts inside, refer all servicing issues to qualified service personnel. Clean with
a lint-free dry or damp cloth. To replace cross-fader, disconnect mains and undo the 2 securing
screws slightly, lift the cross-fader and disconnect from the in-line connector (noting the correct
orientation). Connect the new cross-fader, reposition and secure with the 2 screws. Channel,
Master and Booth faders may be serviced or replaced by removing the plate that they are fitted to.

Packing Contents

 IEC Mains cable
 CDM8:4 USB 19” DJ Mixer
 Instruction Manual

171.135UK User Manual

1.

Combo inputs

Inputs for microphone on jack or XLR

2.

GAIN controls

Mic input sensitivity adjustment

3.

HI controls

Mic EQ high frequency adjustment

4.

MID controls

Mic EQ mid frequency adjustment

5.

LO controls

Mic EQ low frequency adjustment

6.

PAN controls

Mic left/right stereo positioning

7.

ON AIR button

Press in to activate mic channel

8.

MIC O’RIDE button

Select mics to override audio playback

9.

O’RIDE SENS control

Adjust override sensitivity to mic input

10.

O’RIDE DEPTH control

Adjust audio playback reduction amount

11.

Input selector

Select between rear inputs

12.

AUX input

3.5mm input & select switch

13.

GAIN controls

input sensitivity adjustment

14.

HI controls

EQ high freq. adjustment

15.

MID controls

EQ mid freq. adjustment

16.

LO controls

EQ low freq. adjustment

17.

CUE buttons

Select channel to monitor

18.

Channel faders

Channel level to master

19.

ASSIGN rotary

Crossfader channel select

20.

PUNCH buttons

Momentary crossfade defeat

21.

CROSSFADER

Mix between 2 channels

Layout

Microphone Section

Stereo Section:

171.135UK User Manual