AVF Group ZML8360 User Manual

465161 rev00

##

Read through ALL instructions before commencing installation.

STOP

If you have any questions about this product or issues with installation contact the customer services help line before returning this product to the store. See www.avfgroup.com/unimax for instruction video.

CUSTOMER SERVICES HELP LINE NUMBER:

+44 (0)1952 670009 (UK)

1-800 667 0808 (USA)

AVF Group Ltd. Hortonwood 30, Telford, Shropshire, TF1 7YE, England AVF Incorporated 3187, Cornerstone Drive, Eastvale, CA 91752, USA

www.avfgroup.com

TVs up to

32"

81cm

80"

203cm

=

88lbs

40kg

121lbs

55kg

Assembly Overview

Fit Screen Adaptor / Hangers to TV

Fitting the Wall Bracket

Hanging the TV

Retain all packaging in case the bracket needs to be returned. Contents may vary from photography/ Illustrations. You will not need all these parts, so expect there to be some left over depending upon the specification of your TV. This product is intended for indoor use only. Use of this product outdoors could lead to failure and personal injury. It is the responsibility of the installer to ensure that the mounting wall is of a suitable standard and void of any services (eg gas, electricity, water etc). AVF accept no responsibility for any damage or loss caused by installing this product in a sub standard wall.

Index

Measure the TV fixing holes Width and Height

1

Adaptor Required

Fit Adaptor to TV

2

Assemble Positioning Template

3

Determine Bracket Hole Centres

4

Marking Wall For Drill Points

5

Fitting the Wall Bracket

6

Fitting the Wall Bracket Covers

7

Hanging the TV

8

No Adaptor Required

Fit Screen Hangers to TV

9

Assemble Positioning Template

10

Determine Bracket Hole Centres

11

Marking Wall For Drill Points

12

Fitting the Wall Bracket

13

Fitting the Wall Bracket Covers

14

Hanging the TV

15

Tools Recommended

Ø5.5mm (7/32") Masonry

Ø10mm (25/64") Masonry

Stud Finder

Ø3.5mm (9/64") Metal

Ø3mm (1/8") Wood

Boxed Parts

A

A1

B

B1

C

x2

V

D

x2

U1

U2

TV Screws, Reducers and Spacers

You can only

use these

screws with

Adaptor V

J

x8

M4

G1

M5

G4

x4

16mm

G5

16mm

M4

G2

M5

x4

25mm

G3

M5

G6

25mm

M4

x4

45mm

E1

E2

F1

x12

x4

L

H

x2

x4

M

x4

I

x4

N

K

O

x4

x2

M6 M6 M6

x4

G7

M8 M8 M8

x4

G10

G8

16mm

G11

x4

G9

25mm

G12

x4

45mm

F2

F3

x4

P

Q

x2

S

R T

Remove the Wall Bracket Covers and keep for step 7 or 14

Wall bracket covers A1 & B1 are removed in the same way.

i

ii

!

Take Care

Measure the TV fixing holes Width and Height

1

Adaptor

Required

X

75 or

100mm

Y

75 or 100mm

If width X and height Y are not equal to 75mm or 100mm and

!

are less than 200mm, STOP installation now and contact the customer help line

You are provided with 4 diameters of TV fixing screws, M4, M5, M6 and M8. Determine the screw diameter that fits and remember for step 2 or 9.

X = 75 or 100mm

Y = 75 or 100mm

TV Fixing Holes

No Adaptor

Required

X

200mm

to infinity

Y

200mm to infinity

X = 200mm to infinity

Y = 200mm to infinity

TV Fixing Holes

M4 =

G1-G3 G4-G6

G7-G9

M5 =

M8 =M6 =

G10-G12

With or Without Adaptor

The width and height of your TV fixing holes will determine if you need to use the adaptor supplied.

With Adaptor

Follow steps 2 - 8

88lbs

40kg

Without Adaptor

Follow steps 9 - 15

121lbs

55kg

Fit Adaptor to TV

2

Once you have established which screw diameter you need for your TV you will need to choose which wall spacing you require. Check the back of your TV and use the OPTION that fits your TV. Please see page opposite for more details.

With Adaptor

OPTION 1

20mm Wall Space

20mm 30mm 50mm

TV TV TV

Suitable for TVs with a flat

back and no obstructions

power supply, mouldings etc

Top Fixings

G1-G12

If required

Top

F1-F3

OPTION 2

30mm Wall Space

Suitable for TVs with small to medium obstructions eg

Suitable for TVs with large

Bottom Fixings

G1-G12

F1-F3

V

E1

If required

E1

OPTION 3

50mm Wall Space

obstructions eg power

supply, mouldings etc

If required

In certain circumstances it may be necessary to use red spacer E2 as either a replacement or addition to spacer E1.

When is it necessary to use red spacers E2?

It is recommended that when fitting Adaptor V to your TV you have at least 5-10mm of screw engagement. In certain circumstances you may need to use red spacers E2 as either a replacement, or together with

spacers E1 to achieve this. Whenever you use red spacers E2 you must use all 4 provided.

Problem

Not enough screw

engagement

Solution

Red spacer

has replaced

spacer

E2

E1

TV

E2

TV