Live Streamer MIC 133
Quick Guide
English Polski
Deutsch Čeština
Français Pусский
Italiano Türkçe
Español
Português
Nederlands
Magyar
Disclaimer
All pictures contained in this documentation are example images only. The images may vary depending on the product and software version. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice.
Copyright and Trademark Information
© 2018 by AVerMedia Technologies, Inc. All rights reserved. No part of this publication, in whole or in part, may be reproduced, transmitted, transcribed, altered or translated into any language in any form by any means without the written permission of AVerMedia Technologies, Inc. Information and specification contained in this manual are subject to change without notice and do not represent a commitment on the part of AVerMedia.
For more information, please visit www.avermedia.com.
AVerMedia is trademark or registered trademark of AVerMedia Technologies, Inc.
Headquarters
Address |
No.135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan |
Website |
www.avermedia.com |
Support |
www.avermedia.com/support |
Telephone |
+886-2-2226-3630 |
US Office
Address |
47358 Fremont Blvd., Fremont, CA 94538, United States |
Website |
www.avermedia-usa.com |
Telephone |
+1 (510) 403 0006 |
Head Office EU (AVT Solutions GmbH)
Address |
Hanauer Landstrasse 291 B, 60314 Frankfurt Hessen, Germany |
Website |
www.avermedia.com/inquiry |
|
23585 135 |
|
www.avermedia.com |
|
www.avermedia.com/support |
|
+886-2-2226-3630 |
|
488 1510 |
|
www.avermedia.com.cn |
|
+86-21-52987985 |
2
Important Safety Instructions
1.Read these instructions.
2.Keep these instructions.
3.Follow all instructions.
4.Heed all warnings.
5.Do not use the apparatus on uneven or unstable surfaces.
6.Do not use this apparatus in a wet environment or near water.
7.Unplug the apparatus before cleaning. Clean only with a dry cloth.
8.Use in a well ventilated environment. Do not block any ventilation openings.
9.Use the apparatus within ambient temperatures 32–104°F (0–40°C).
10.Use power sources within the specified voltage range.
11.Do not place heavy objects on the apparatus.
12.Do not install near heat sources such as radiators or stoves.
13.Do not defeat the safety purposes of the polarized or grounding-type plug.
14.Protect the power cord from being walked on or pinched, particularly where the cord connects with plugs or adapters.
15.Only use the attachments and accessories specified by the manufacturer.
16.Unplug this apparatus during lightning or when unused for prolonged periods of time.
17.Do not modify or disassemble the apparatus in any way.
18.Refer all servicing to AVerMedia Customer Service.
19.Do not dispose the apparatus as general household waste. Dispose in accordance with local environmental laws.
9.32–104°F (0–40°C)
19. |
3 |
9.32–104°F (0–40°C)
4
Inside the Box |
|
EN |
These are what you'll find in the box:
Microphone |
Quick Guide |
Metal Stand |
Shock Mount |
|||||||
|
|
|
|
|
|
|
|
|
|
|
3-Pole to 3-Pole |
4-Pole to 3-Pole Windscreen |
Carrying Case |
3.5 mm Cable |
3.5 mm Audio |
|
|
Adapter Cable |
|
Parts and Ports
1
2
3
4
1 |
Microphone Grille |
3 |
Cable Clip |
2 |
3.5 mm Jack |
4 |
Camera Shoe Mount |
5
Mounting to Camera
1.Insert the mic body into the shock mount.
2.Turn the tightening ring counter-clockwise to lossen the camera shoe mount.
3.Slide the camera shoe mount into place on the camera mount. Once the mic is in place, turn the ring clockwise to tighten the shock mount.
4.Plug one end of the 3-pole to 3-pole 3.5 mm cable into the mic.
6
5.Plug the other end to your camera’s MIC input jack and secure the cable by attaching it to the cable clip.
Note: For better audio quality, it’s highly recommended to use the included windscreen to reduce wind noise when recording outdoors or breath noise when recording human voice.
7
Using with Smartphone
You can connect the mic to a smartphone mounted on a tripod.
Note: When connecting to smart-
phones with a 3.5 mm headphone jack, use the included 4-pole to
3-pole 3.5 mm audio adapter cable and plug the 4-pole end into
your smartphone. You can plug your headphones into the 3.5 mm jack for audio playback.
The shock mount can be attached to the included metal stand.
Note: When connecting to smartphones without a 3.5 mm headphone jack, you’ll need either a Lightning to 3.5mm or USB-C to 3.5mm adapter for
iPhone or Android phone respectively. Use the included 4-pole to 3-pole 3.5 mm audio adapter cable, plug the 3-pole end into the mic and the 4-pole
8end into the adapter (not included).