AVer Rugged Bullet Installation Guide
AVer Rugged Bullet type Camera
Installation Guide
Table of Contents
IMPORTANT SAFEGUARD ................................................................................................. 1
PACKAGE CONTENTS ....................................................................................................... 2
THE FOLLOWING ITEMS ARE INCLUDED IN THE PACKAGE. ....................................... 2
OPTIONAL ACCESSORIES ................................................................................................ 2
BULLET IP CAMERA PARTS.............................................................................................. 3
MOUNTING THE IP CAMERA ............................................................................................. 4
DEPLOYING NETWORK ........................................................................................................ 4
Network Connection via Ethernet Switch .................................................................... 4
Power over Ethernet Connection ................................................................................ 5
CONNECTING EXTERNAL DEVICES TO I/O TERMINAL BLOCK ................................ .................... 6
POWER LED ...................................................................................................................... 6
INTERNAL CONNECTION DIAGRAM OF DI/DO ......................................................................... 6
MOUNTING THE IP CAMERA ................................................................................................. 7
FOCUSING THE IP CAMERA WITH BNC MONITOR ................................................................... 9
INSERT MICROSD CARD TO SYSTEM ................................................................................... 10
HARDWARE RESET ......................................................................................................... 11
TECHNICAL SPECIFICATIONS ........................................................................................ 12
SF2121H-BHR-30 / SF2121H-BHR-50 ...................................................................... 12
FB2028-T1/FB2028-T2/FB2028-TM .......................................................................... 16
FB3028-RT1/FB3028-RT2/FB3028-RTM ................................................................... 20
COPYRIGHT ...................................................................................................................... 24
NOTICE .............................................................................................................................. 24
WARNING .......................................................................................................................... 24
GOVERNING LAW AND YOUR RIGHTS .......................................................................... 26
ENGLISH
Do not use power supply with different voltage
other than DC12V/PoE.
Do not submerge the unit in the water.
Unplug the power of this unit as soon as smoke
or unusual odor is detected.
Unplug the power supply before cleaning. Use
only a lens cleaning cloth and never use
benzene, thinner, or other solvent for cleaning.
Do not attempt to service this unit by yourself.
Always refer all servicing to qualified service
personnel.
Do not place the unit in unsteady surface and
also do not drop the unit.
Keep the IP camera housing close and prevent
the dust from getting in the housing.
Important Safeguard
1
AVer rugged bullet type camera
Software & Manual CD
2 L-type Wrenches
Sun Shield
2 Sun Shield Bolts
Torx Pin Head Bolt
Wall Mount Bracket
Alignment Sticker
3 Screws
3 Washers
3 Plastic Anchors
Hex Socket Cap Bolt
Power Adapter (12V, 4A) and Power cord
* The power adapter will vary depending on the
standard power outlet of the country where it is
sold. Depending on your package the power
adapter maybe included.
Package Contents
The following items are included in the package.
Optional Accessories
2
ENGLISH
(4)
(10)
(1)
(3)
(5)
(6)
(7)
(8)
(9)
(2)
No.
Function
No.
Function
(1)
Sun Shield
(6)
BNC Jack (Video Out)
(2)
Camera Lens
(7)
RJ45 Ethernet Jack
(3)
Light Sensor
(8)
I/O Terminal Block
(4)
Latch
(9)
Phone Jack (Audio In)
(5)
Power Jack
(10)
Phone Jack (Audio Out)
Rugged Bullet IP Camera Parts
3
Ethernet Switch
Power
Adapter
W
all Outlet
Mounting the IP Camera
This section provides useful tips on how to adjust the IP camera to meet your needs.
Deploying Network
Network Connection via Ethernet Switch
Connect the RJ45 cable from the Ethernet switch to RJ45 Ethernet jack of camera
Connect the power adapter to power jack of camera.
4
ENGLISH
PoE Switch
PoE Injector
Power cable
W
all outlet
Ethernet Switch
Power over Ethernet Connection
Rugged bullet type camera is fully complies with PoE standard. It allows you to use PoE enabled
switch or PoE injector to transmit data and power thru single Ethernet cable.
PoE Enabled Switch Connection Diagram
PoE Injector Connection Diagram
5
No.
Function
(1)
Power 12V
(2)
Digital Output
(3)
Digital Input
(4)
Ground
[Note] Maximum power output is 12V/100mA
LED
Status
Steady Red
Heating
Blinking Green
System working
Steady Green
Booting
Firmware updating
No Light
Power off
Connecting External Devices to I/O Terminal Block
Power LED
Internal Connection Diagram of DI/DO
6
ENGLISH
1. Use the supplied 2 sun shield bolts and
secure the sun shield on the IP camera.
2. Place the sticker on the wall surface. Then
spot the mark and drill the 4 holes
indicated on the sticker. It’s not necessary
to drill the biggest hole if you are going to
run the wire on the side.
3. Insert the 3 plastic anchors in the wall.
Place the washer on the 3 screws and
secure the mounting bracket on the wall.
4. Hook the IP Camera and use the hex
socket cap bolt to secure the IP camera on
the mount bracket.
Mounting the IP Camera
7
Loading...