Page 1
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
AV Connectivity, Distribution And Beyond...
HDMI LAN Extender up to 100M
over Single CAT5/6
CABLES & ACCESSORIES
© 2013 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Model #: HDM-C6IP-SET
Page 2
Product Application & Market Sectors
Corporate House Of Worship
Military Residential
Education Industrial
Medical Aviation
www.avenview.com
Page 3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMPORTANT SAFEGUARDS .............................................................................................................. 1
1.2 SAFETY INSTRUCTIONS ..................................................................................................................1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........................... 2
2. INTRODUCTION .............................................................................................................................. 3
2.1 PACKAGE CONTENTS .....................................................................................................................4
2.2 BEFORE INSTALLATION ...................................................................................................................4
2.3 DEVICE DESCRIPTION & LAYOUT .................................................................................................. 7
2.3.1 Front Panel & Rear Panel (Transmitter, HDM-C6IP-S) ............................................................... 7
2.3.2 Front Panel & Rear Panel (Receiver, HDM-C6IP-R) ................................................................... 7
3. INSTALLATION ..................................................................................................................................8
4. GENERAL TROUBLESHOOTING ..................................................................................................... 8
5. SPECIFICATIONS ............................................................................................................................... 9
6. PIN & WIRING STANDARD DEFINITION ...................................................................................... 10
www.avenview.com
Page 3
Page 4
1. GETTING STARTED
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
• Any product, on which the serial number has been defaced, modified or removed.
• Damage, deterioration or malfunction resulting from:
• Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
• Repair or attempted repair by anyone not authorized by us.
• Any damage of the product due to shipment.
• Removal or installation of the product.
• Causes external to the product, such as electric power fluctuation or failure.
• Use of supplies or parts not meeting our specifications.
• Normal wear and tear.
• Any other causes which does not relate to a product defect.
• Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The Avenview HDM-C6IP-SET, HDMI Extender has been tested for conformity to safety regulations and requirements, and has
been certified for international use. However, like all electronic equipment’s, the HDM-C6IP-SET should be used with care.
Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
!
Dismantling the housing or modifying the module may result in electrical shock or burn.
!
Refer all servicing to qualified service personnel.
!
Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
!
or other hazards
Keep the module away from liquids.
!
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
!
to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
!
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
!
www.avenview.com
Page 1
Page 5
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL
VOID THE WARRANTY AND CONTINUED USE OF THE
PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
www.avenview.com
Page 2
Page 6
2. INTRODUCTION
HDM-C6IP-SET, HDMI extender set is designed to extend your HD display with the resolutions of 1080p/60Hz up to 330 feet
(100 meters) away from your HDMI or DVI-D source. Thanks to the use of the TCP/IP protocol, you can transfer your highdefinition video over an existing TCP/IP network. See below three examples:
A: The Tx and Rx units can extend 100 meters over a single CAT5/6 cable connection point to point.
B: The Tx can be connected to a Gigabit switch to establish a IP address therefore sending 1080p video signals to multiple
Rx connected to the Gigabit switch and the HDMI displays.
C: Multiple Tx’s can be connected to a Managed Gigabit switch with VLAN/IGMP support therefore sending 1080p video
signals to Rx connected to the Gigabit switch to show different sources on the HDMI displays.
• Extends HDMI up to 95m/100m over single CAT5E/6
• Supports HDMI, EDID, Support HDCP
• Supports resolution HDTV / 1080Pp/60Hz, Vesa (1920 x 1080)
• Supporting the point to point transmission function currently which can be expanded to the multi-point to point
transmission function.
• Requires a managed Gigabit switch with VLAN/IGMP support to have a soultion with multiple sources (Transmitters).
Standard Gigabit switch can only support one transmitter.
• The managed switch must support port based IEEE 802.1Q VLAN, IGMP, and to allow duplicate IP addresses across
the VLAN domains.
• Each VLAN acts as independent HDMI over IP Channel on the network.
• Number of Tx and Rx that can be used is dependent on bandwidth of the switch (Recommended Gigabit switch
10/1000).
• Managed switches can be cascaded up to 3 levels, allowing the farthest display to be located up to 300 meters away
from the source device. Each receiver can be located up to 100 meters away.
• Uses M-JPEG technology to process image compression on a fixed bandwidth.
www.avenview.com
Page 3
Page 7
2.1 PACKAGE CONTENTS
Before you start the installation of HDM-C6IP-SET, please check the A. STANDARD package contents.
HDMI TRANSMITTER X 1
1
HDMI RECEIVER X 1
2
POWER ADAPTER (5VDC) X 2
3
USER’S MANUAL X1
4
2.2 BEFORE INSTALLATION
• Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
• Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
• Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
www.avenview.com
Page 4
Page 8
www.avenview.com
Page 5
Page 9
www.avenview.com
Page 6
Page 10
2.3 DEVICE DESCRIPTION & LAYOUT
This product is composed of a Transmitter and a Receiver.
2.3.1 Front Panel & Rear Panel (Transmitter, HDM-C6IP-S)
1
1 CAT5E/6: Plug in a Cat-5E/6 cable that needs
to be linked to the receiving unit
2 SELECT: To pair with the corresponding
Transmitter unit.
2
3 +5V DC: Connect to 5V DC power supply.
4 HDMI IN: Connects to a HDMI source with a HDMI
male-male cable.
3
2.3.2 Front Panel & Rear Panel (Receiver, HDM-C6IP-R)
1
1 CAT5E/6: Plug in a Cat-5E/6 cable that needs to
be linked to the receiving unit
2 SELECT: To pair with the corresponding
Transmitter unit.
2
3 +5V DC: Connect to 5V DC power supply.
4 HDMI OUT: Connects to a HDMI source with a
HDMI male-male cable.
3
4
4
• Each Transmitter and Receiver after pairing support only point to point operation. It cannot support signals
broadcasting by HDMI.
• Important Before starting the insulation please ensure that all devices are powered OFF
www.avenview.com
Page 7
Page 11
3. INSTALLATION
Please ensure all the package contents are all received.
To setup Avenview HDM-C6IP-SET follow these steps for connecting to a device:
1. Connect your HDMI source (such as a Blu-ray Disc player) to Transmitter (HDM-C6IP-S).
2. Connect your HDMI display (such as a LCD TV) to the receiving unit HDM-C6IP-R.
3. Connect your CAT-5E/6 follow the standards of TIA-568BLAN cable between the transmitting and receiving units.
4. Make sure CAT-5E/6 LAN cable is tightly connected and not loose.
5. Plug in 5V DC power cord to the power jack of the transmitting unit HDM-C6IP-S
6. Plug in 5V DC power cord to the power jack of the receiving unit HDM-C6IP-R.
4. GENERAL TROUBLESHOOTING
PROBLEM
NO IMAGE
SCREEN DEFECTS
APPEAR
YELLOW LIGHT ON LAN PORT
FLASHING SLOW
YELLOW LIGHT ON LAN PORT
FLASHING FAST/NO IMAGE
NO YELLOW LIGHT ON LAN
PORT
POSSIBLE SOLUTION
• Check if connection to the source and the display are correct.
• Ensure that display device supports 480p, 720p and 1080p resolution
• Check the DVI and HDMI connection
• Check both units and make sure the TX and RX are not Reversed
• Check the source device is powered ON
• Check Graphics card on PC. This product supports up to 1080p
(1920x1080) resolution.
• Check Network cable only use TIA-568B Standard
• Network cable run is out of range
www.avenview.com
Page 8
Page 12
5. SPECIFICATIONS
ITEM DESCRIPTION
UNITS HDM-C6IP-S HDM-C6IP-R
UNIT DESCRIPTION HDMI Transmitter HDMI Receiver
HDMI COMPLIANCE Full HD
HDCP COMPLIANCE Yes
VIDEO BANDWIDTH
SUPPORTED RESOLUTIONS
RESOLUTION AND DISTANCE (24-BIT)
AUDIO SUPPORT Surround Sound (up to 7.1 Ch) or Stereo Digital Audio
IR PASS-THRU NO
RS-232 SUPPORT NO
INPUT 1x HDMI 1x RJ45
OUTPUT 1x RJ45 1x HDMI + 1x 3.5mm
HDMI CONNECTOR Type A (19 pin female)
RJ45 CONNECTOR WE/SS 8P8C with 2 LED indicators
POWER ADAPTER 2 X DC 5V/1A
POWER CONSUMPTION 3W Max Each
DIMENSION L X W X H (Tx: 4.3” Rx: 4.3”) x (Tx: 2.2” Rx: 2.2”) x (Tx: 1” Rx: 1”)
WEIGHT 245g
Environmental
OPERATING TEMPERATURE 32˚ ~ 104˚F (0˚ to 40˚C)
STORAGE TEMPERATURE -4˚ ~ 140˚F (-20˚ ~ 60˚C)
RELATIVE HUMIDITY 20~90% RH (no condensation)
M-JPEG technology to process image compressing GIGABIT (10/1000)
OVER LAN
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz
Full HD: (1080p)-95meter (295feet) (CAT5e) / 100meter (328feet) (CAT6)
PERFORMANCE GUIDE FOR HDMI OVER CATEGORY CABLE TRANSMISSION
PERFORMANCE RATING TYPE OF CATEGORY CABLE
WIRING
SOLID
STRANDED
TERMINATION PLEASE USE EIA/TIA-568-B TERMINATION (T568B) AT ANY TIME
SHIELDING CAT5 CAT5E CAT6
UNSHIELDED (UTP)
SHIELDED (STP)
UNSHIELDED (UTP)
SHIELDED (STP)
www.avenview.com
Page 9
Page 13
6. PIN & WIRING STANDARD DEFINITION
TYPE A (RECEPTACLE) HDMI
Pin 1 TMDS Data2+ Pin 11 TMDS Clock Shield
Pin 2 TMDS Data2 Shield Pin 12 TMDS Clock–
Pin 3 TMDS Data2– Pin 13 CEC
Pin 4 TMDS Data1+ Pin 14 Reserved (N.C. on device)
Pin 5 TMDS Data1 Shield Pin 15 SCL
Pin 6 TMDS Data1– Pin 16 SDA
Pin 7 TMDS Data0+ Pin 17 DDC/CEC Ground
Pin 8 TMDS Data0 Shield Pin 18 +5V Power
Pin 9 TMDS Data0– Pin 19 Hot Plug Detect
Pin 10 TMDS Clock+
www.avenview.com
Page 10
Page 14
Notes
www.avenview.com
Page 11
Page 15
Avenview Warranty Certificate
AVENVIEW CORP. (“Avenview”) warrants Avenview-branded product(s) contained in the original packaging against defects in materials and workmanship when used
normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period. Avenview’s
published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications.
LABOR: During the Warranty Period of THREE (3) YEARS, Avenview will repair or replace the product(s) at no cost using new or used parts equivalent to novel performance
and reliability if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Labor applicable to product(s) after Warranty Period. For labor costs,
please contact support@avenview.com.
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if
the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact
support@avenview.com.
To obtain Warranty: (a) proof of purchase in the form of a bill of sale or receipted invoice reflecting that the registered product(s) is within warranty period must be presented
to obtain warranty service; (b) product(s) must be registered at time of purchase. Failure to do so will result in applicable parts and labor charges. Returning product(s) must
be shipped in Avenview’s original packaging or in packaging pertaining equal degree of protection to Avenview’s. Both Avenview and purchaser are responsible for freight
charges and brokerages when shipping the product(s) to the receiver.
This warranty does not apply to any non-Avenview branded product(s); non-registered Avenview product(s). This warranty does not apply: (a) to cosmetic damage, including
but not limited to scratches, dents and broken cords; (b) to damage caused by use with another product; (c) to damage caused by accident, abuse, misuse, liquid contact, fire,
earthquake or other external cause; (d) to damage caused by operating the Avenview product(s) outside Avenview’s manuals or guidelines; (e) to damage caused by service
performed by anyone who is not a representative of A venview or an Avenview authorized personnel; (f) to defects caused by normal wear and tear or otherwise due to the
normal aging of the Avenview product(s), or (g) if any serial number has been removed or defaced from the Avenview product(s).
AVENVIEW IS NOT LIABLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR
CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR
ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS;
LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATI ON; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIR ECT
OR CONSEQUENTIAL LOSS OR DAMAGE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
Some states do not allow the inclusion or limitation of incidental or consequential damages, or allow limitations on duration implements of the Warranty Period; therefore the above limitations or
exclusions may not be applicable to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
NOT COVERED BY THIS WARRANTY
275 Woodward Avenue, Kenmore, NY 14217
1.866.508.0269
www.avenview.com
www.avenview.com
Page 12
Page 16
AV Connectivity, Distribution And Beyond...
TECHNICAL SUPPORT
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of
Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this
documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages
in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design.
With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but
not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement.
Loading...