Page 1
www.avenview.com
1
HDMI Extender over Fiber Optic Cable
Model #: FO-HDMI-XX-MM
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
Page 2
www.avenview.com
2
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 3
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4 Introduction ........................................................................................................................... 4
1.5 Model Description ................................................................................................................. 5
1.6 Package Contents ................................................................................................................... 5
1.7 Before Installation.................................................................................................................. 5
1.8 Installation ............................................................................................................................. 6
Section 2: Specifications ......................................................................................................................... 7
2.1 Part List ......................................................................................................................................... 8
2.2 Power Consumption and DDC Power Requirements ................................................................... 9
2.3 Signal Pin Assignment .................................................................................................................. 9
2.4 FO-HDMI-XX-MM Cable Construction ........................................................................................ 10
2.4.1 Wiring Diagram ................................................................................................................... 11
Page 3
www.avenview.com
3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
The Avenview FO-HDMI-XX-MM, HDMI Extender System over Fiber Optic, has been tested for conformance to
safety regulations and requirements, and has been certified for international use. However, like all electronic
equipment’s, the FO-HDMI-XX-MM should be used with care. Read the following safety instructions to protect
yourself from possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
Page 4
www.avenview.com
4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview FO-HDMI-XX-MM Series with fiber optic cable system lets you extend digital flat panel signal up to
100 meters (330 feet) without signal degradation by at 1080p resolution.
- High Speed and long distance transmission by Optical fiber
- Fully compatible with HDMI 1.3
- Supports 12 bit Deep Color
- Uses standard Type A HDMI receptacle
- DDC and CEC signal and 5V power line are transmitter by copper line
- HDCP Compliant
Page 5
www.avenview.com
5
1.5 Model Description
FO-HDMI-XX-MM
Model Name Length in Meters (5 = 5 meters, 10 = 10 meters)
1.6 Package Contents
Before you start the installation of the converter, please check the package contents.
- HDMI Optical Cable with Transmitter and Receiver x 1
- User’s Manual x 1
1.7 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Page 6
www.avenview.com
6
Use the DC power adapter (optional) with correct specification. The Transmitter which is connected to a
Do not twist or pull by force the both ends of the optical cable. It may cause malfunction
1.8 Installation
Avenview FO-HDMI-XX-MM is composed of a Transmitter converting the graphic signal of a computer to
optical and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor
converted from the optical signal to electrical signal. The Transmitter should be connected to computer and
the Receiver should be connected to a monitor.
Avenview FO-HDMI-XX-MM is designed to self-detect the resolution of the monitor and change the resolution
accordingly. Follow these steps for connecting to a device:
To setup Avenview FO-HDMI-XX-MM follow these steps for connecting to a device:
1. Power on your display
2. Connect Transmitter to the PC and Receiver to the Display.
3. Connect the optical fiber between Transmitter and Receiver.
4. Restart the computer.
computer uses power from the computer.
Page 7
www.avenview.com
7
Section 2: Specifications
Item
Description
Units
FO-HDMI-XX-MM (Transmitter)
FO-HDMI-XX-MM (Receiver
Unit Description
HDMI Fiber Optic Transmitter
HDMI Fiber Optic Receiver
HDMI Compliance
HDMI 1.3
DVI Compliance
DVI 1.0
HDCP Rev
1.1
Input Signal
TMDS Signal (HDMI 1.3 Standard)
Output Signal
TMDS Signal (HDMI 1.3 Standard)
Video Bandwidth
12bit Deep Color / 60Hz
Supported Resolution &
Distance
Up to WUXGA (1920x1200), 1080p @ 100 meters ( 330 feet)
Optical Converter
4 ch 850 nm Multi-Mode VCSEL
4 ch GaAs PIN photo Diode
HDMI Connector
19 pin HDMI Plug
Fiber Type
50/125 µm Multi-mode glass fiber
Power Consumption
0.8W (max)
1.05W (max)
Bending Radius
70mm
Dimensions (L x W x H)
1” x 2.9” x 0.8”
Environmental
Operating Temperature
32˚ ~ 104˚F (0˚ to 40˚C)
Storage Temperature
-4˚ ~ 140˚F (-20˚ ~ 60˚C)
Relative Humidity
20~90% RH (no condensation)
Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to
reliability.
the device. This is a stress rating only and functional operation of the device at these or any other
conditions above those indicated in the operations section for extended periods of time may affect
Page 8
www.avenview.com
8
2.1 Part List
Item Description
Q’ty Material
A
DVI-D Single Link 18 Plug
2
Glass filled thermoplastic UL94V-0
B
DVI Case-Top, Bottom
2
Glass filled PC UL94V-0
C
DVI Thumb Screw
4
SUM 24L+ABS
D
Stopper
2
PVC 55%
E
Epoxy Printed Circuit Board for Tx
1
FR-4, 1.5t UL94V-0
F
Optical Connector for VCSEL,PD
2
PA46 UL94V-0 + C5210
G
Optical Connector for fiber
2
PA46 UL94V-0
H
Epoxy Printed Circuit Board for Rx
1
FR-4, 1.5t UL94V-0
I
Vertical Surface Emitting Laser Diode
4
GaAs
J
Photo Detector
4
GaAs
K
4 fiber 5 copper DVI Optic Cable
1
See Section 4
L
4 fiber DVI Optic Cable
1
See Section 4
M
Label
4
Polyester-matte 3.3mil
N
DC Power Jack
2
Polyamide 6/6
O
DC Power Adaptor
1
E191362 (UL No)
Page 9
www.avenview.com
9
2.2 Power Consumption and DDC Power Requirements
Item
maximum
unit
Transmitter
0.8 Watt
Receiver
1.05 Watt
Pin
Signal Assignment
Pin
Signal Assignment
Pin
Signal Assignment
1
T.M.D.S. Data2+
9
T.M.D.S. Data0-
17
DDC/CEC Ground
2
T.M.D.S. Data2 Shield
10
T.M.D.S. Clock+
18
+5V Power
3
T.M.D.S. Data2-
11
T.M.D.S. Clock Shield
19
Hot Plug Detect
4
T.M.D.S. Data 1+
12
T.M.D.S. Clock-
5
T.M.D.S. Data 1 Shield
13
CEC
6
T.M.D.S. Data 1-
14
Reserved (N.C on device)
7
T.M.D.S. Data 0+
15
SCL
8
T.M.D.S. Data 0 Shield
16
SDA
If graphic board of the computer does not supply over 0.6A, 5V, FO-HDMI-XX-MM cable
Power consumption of FO-HDMI-XX-MM Transmitter and Receiver Module
Transmitter module of FO-HDMI-XX-MM without external power supply is operated by drawing out power for
DDC from the computer and receiver module of FO-HDMI-XX-MM cable also utilize the DDC power delivered
via copper wire.
may not operate normally.
2.3 Signal Pin Assignment
Transmitter / Receiver
Page 10
www.avenview.com
10
2.4 FO-HDMI-XX-MM Cable Construction
The Dimension of FO-HDMI-XX-MM Cable
Items
Unit
Specification
DVI Cable Make-up
-
Layer Stranding
Drain Wires (Size/Stranded)
mm(AWG)
-0.203/7 (24)
AL-Mylar Screen Shield
-
A helically
Cable Outer Diameter
mm
7.40±0.20
Jacket Color
-
FR-PVC(Orange, Blue, Black)
Cable Marking - If need
Item
Description
Optical
Fiber
Number
4
Structure
Figure 1
Strength Member
Aramid Yarn
Outer
Jacket
Material
FR-PVC(Yellow)
Approx.Thickness
1.6mm
Nominal Outside Diameter
4.0±0.4mm
Approximate Net Weight
10kg/km
Cable Identification
OPTICAL HDMB CABLE
The construction of 4 Optical Fibers and 4 Copper wires cable shall be in accordance with Figure and
Table below:
Fiber Cable Construction
Page 11
www.avenview.com
11
2.4.1 Wiring Diagram
Page 12
www.avenview.com
12
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.
Loading...