Page 1
www.avenview.com
1
DisplayPort Extender over
Fiber Optic Cable
Model #: FO-DP-XX-MM
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
Page 2
www.avenview.com
2
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 3
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4 Introduction ........................................................................................................................... 4
1.5 Model Description ................................................................................................................. 4
1.6 Package Contents ................................................................................................................... 4
1.7 Before Installation.................................................................................................................. 5
1.8 Installation ............................................................................................................................. 6
Section 2: Specifications ......................................................................................................................... 7
2.1 Electrical & Optical Specifications ................................................................................................ 7
2.1.1 Transmitter (Source) Module ................................................................................................ 7
2.1.2 Receiver Module ................................................................................................................... 8
2.2 Connector Pin Assignment ........................................................................................................... 8
2.2.1 Transmitter (Male) ................................................................................................................ 8
2.2.2 Receiver (Female) .................................................................................................................. 8
2.3 Mechanical Specifications ............................................................................................................ 9
2.3.1 Case Dimensions ................................................................................................................... 9
2.3.2 Optical Cable Info ................................................................................................................ 10
Page 3
www.avenview.com
3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
The Avenview FO-DP-XX-MM, DisplayPort Extender System over Fiber Optic, has been tested for conformance
to safety regulations and requirements, and has been certified for international use. However, like all
electronic equipment’s, the FO-DP-XX-MM should be used with care. Read the following safety instructions to
protect yourself from possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
Page 4
www.avenview.com
4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview FO-DP-XX-MM Series with fiber optic cable system lets you extend DisplayPort digital signal up to 65
meters (210 feet) at WQXGA (2560x1600) resolution.
- High Speed and long distance transmission by Optical fiber
- Compatible with DisplayPort standard v1.1a
- HBR(High Bit Rate) Cable Assembly (up to 2.7Gbs Data Rate)
- Use Extender Power
- Supports up to WQXGA (2560 x 1600) resolution
- AUX and Hot-Plug channels are transmitted by copper line
- DPCP & HDCP compliant(DPCP & HDCP are not part of the DisplayPort standard)
1.5 Model Description
FO-DP-XX-MM
Model Name Length in Meters (5 = 5 meters, 10 = 10 meters)
1.6 Package Contents
Before you start the installation of the converter, please check the package contents.
- DisplayPort Extender Cable with Transmitter and Receiver x 1
- User’s Manual x 1
Page 5
www.avenview.com
5
1.7 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Page 6
www.avenview.com
6
1.8 Installation
Avenview FO-DP-XX-MM is composed of a Transmitter converting the graphic signal of a computer to optical
and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor converted
from the optical signal to electrical signal. The Transmitter should be connected to computer/media player
DisplayPort connector and the Receiver should be connected to a monitor/TV with DisplayPort connector.
Avenview FO-DP-xx-MM is designed to self-detect the resolution of the monitor and change the resolution
accordingly. Follow these steps for connecting to a device:
1. Power on your display
2. Connect Transmitter to the PC and Receiver to the Display.
3. Connect the optical fiber between Transmitter and Receiver.
4. Restart the computer or media player.
Page 7
www.avenview.com
7
Section 2: Specifications
Item
Description
Units
FO-DP-XX-MM (Transmitter)
FO-DP-XX-MM (Receiver)
Unit Description
DisplayPort Fiber Optic Transmitter
DisplayPort Fiber Optic Receiver
Video Bandwidth
10bit Deep Color / 60Hz
Supported Resolution &
Distance
Up to WQXGA 2560 x 1600 @ 65 meters ( 210 feet)
Optical Converter
4 ch 850 nm Multi-Mode VCSEL
4 ch GaAs PIN photo Diode
Connector Type
20 pin DisplayPort Plug (Male)
20 pin DisplayPort Plug (Female)
Fiber Type
50/125 µm Multi-mode glass fiber
Environmental
Operating Temperature
32˚ ~ 104˚F (0˚ to 40˚C)
Storage Temperature
-4˚ ~ 140˚F (-20˚ ~ 60˚C)
Relative Humidity
20~90% RH (no condensation)
Parameter
Symbol
Min
Type
Max
Units
Power
Supply Voltage
Vcc
+5.0 V
Supply Current
Icc
250 mA
Power Dissipation
Po
1.25 W
Signal
Diff. P-to-P Input Level 1
VTX-DIFF-PP1
0.34
0.4
0.46
V
Diff. P-to-P Input Level 2
VTX-DIFF-PP2
0.51
0.6
0.68
V
Diff. P-to-P Input Level 3
VTX-DIFF-PP3
0.69
0.8
0.92
V
Diff. P-to-P Input Level 4
VTX-DIFF-PP4
1.02
1.2
1.38
V
TX DC Common Mode
VTX-DC-CM
0 2.0
V
TX AC Common Mode
VTX-AC-CM
20
mV
2.1 Electrical & Optical Specifications
2.1.1 Transmitter (Source) Module
Transmitter (Source) module of Model DPM includes 4 channel VCSEL (Vertical Surface Emitting Laser Diode)
with 850 nm invisible laser radiation.
Transmitter (Source) module of DPM is Class 1 Laser Product.
Page 8
www.avenview.com
8
2.1.2 Receiver Module
Parameter
Symbol
Min
Type
Max
Units
Power
Supply Voltage
Vcc
+5.0 V
Supply Current
Icc
280 mA
Power Dissipation
Po
1.4 W
Signal
Diff. P-to-P Output Level 1
VTX-DIFF-PP-H
120 0.46
mV
Diff. P-to-P Output Level 2
VTX-DIFF-PPR
40 0.68
mV
RXDAC Common Mode
VTX-DC-CM
0 20
V
Pin Pin Name
Pin Pin Name
1
ML_Lane0(p)
2
GND
3
ML_Lane0(n)
4
ML_Lane1(p)
5
GND
6
ML-Lane1(n)
7
ML-Lane2(p)
8
GND
9
ML_Lane2(n)
10
ML_Lane3(p)
11
GND
12
ML_Lane3(n)
13
CONFIG1
14
CONFIG2
15
AUX_CH(p)
16
GND
17
AUX_CH(n)
18
Hot Plug Detect
19
Return
20
No Connect(DP_PWR)
Pin Pin Name
Pin Pin Name
1
ML_Lane3(n)
2
GND
3
ML_Lane3(p)
4
ML_Lane2(n)
5
GND
6
ML-Lane2(p)
7
ML-Lane1(n)
8
GND
9
ML_Lane1(p)
10
ML_Lane0(n)
11
GND
12
ML_Lane0(p)
13
CONFIG1
14
CONFIG2
15
AUX_CH(p)
16
GND
17
AUX_CH(n)
18
Hot Plug Detect
19
Return
20
No Connect(DP_PWR)
2.2 Connector Pin Assignment
2.2.1 Transmitter (Male)
2.2.2 Receiver (Female)
Page 9
www.avenview.com
9
2.3 Mechanical Specifications
2.3.1 Case Dimensions
Page 10
www.avenview.com
10
2.3.2 Optical Cable Info
Dimensions of DisplayPort Cable
Items
Unit
Specifications
DisplayPort Cable Make-up
-
Layer Stranding
Drain Wires (Size/Stranded)
mm(AWG)
-0.203/7 (24)
AL-Mylar Screen Shield
-
A helically
Cable Outer Diameter
Mm
7.40 ± 0.20
Jacket Color
-
Black
Fiber Cable Characteristics
Item
Spec
Unit
Condition
Storage Temperature
-20 ~ 70
°C
Spooled
Operational Test
0 ~ 50
°C
-
Max. Tensile Load
245 N
Min. Radius Bend
25
mm
40
Crush Resistance
490
N/50mm
Page 11
www.avenview.com
11
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.
Loading...