Page 1
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
Control Your Video
CABLES & ACCESSORIES
DisplayPort Extender
over Fiber Optic Cable
UHD
3860x2160
© 2015 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Model #: FO-DP4K-XX-MM
Page 2
Product Application & Market Sectors
Corporate House Of Worship
Military Residential
Education Industrial
Medical Aviation
www.avenview.com
Page 3
www.avenview.com
Page
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMpORTANT SAf EGu ARDS .............................................................................................................. 1
1.2 SAf ETy I NSTRu CTIONS ..................................................................................................................1
1.3 REGul ATORy N OTICES fEDERA l C OMMu NICATIONS COMMISSION (f CC) ........................... 2
2. INTRODu CTION .............................................................................................................................. 3
2.1 MODEl D ESCRIpTION .....................................................................................................................3
2.2 pACkAGE CONTENTS .....................................................................................................................4
2.3 BEfORE INSTAllATION
3. OPTICAL FIBER HAZARD ..................................................................................................................4
INSTAll ATION .................................................................................................................................. 5
4.
SpECIf ICATIONS ...............................................................................................................................6
5.
6. DISPLAYPORT PIN ASSIGNMENT
7. FO-DP4K-XX-MM CABLE CONSTRUCTION ...................................................................................8
8. MECHANICAl SpECIfICATIONS
9. GENERAL TROUBLESHOOTING .....................................................................................................11
................................................................................................................... 4
...................................................................................................7
.....................................................................................................9
3
Page 4
www.avenview.com
Page
1. GETTING STARTED
SECTION 1: GETTING STARTED
1.1 IMpORTANT SAf EGu ARDS
Please read all of these instructions carefully before you use the Fiber Optic cable. Save this manual for future
reference.
What the warranty does not cover
• Any product, on which the serial number has been defaced modified or removed.
• Damage, deterioration or malfunction resulting from:
• Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
• Repair or attempted repair by anyone not authorized by us.
• Any damage of the product due to shipment.
• Removal or installation of the product.
• Causes external to the product, such as electric power fluctuation or failure.
• u se of supplies or parts not meeting our specifications.
• Normal wear and tear.
• Any other causes which does not relate to a product defect.
• Removal, installation, and set-up service charges.
1.2 SAf ETy I NSTRu CTIONS
The Avenview fO-Dp 4K-XX-MM, Displayport Extender System over fiber Optic, has been tested for conformance to
safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the
fO-Dp 4K-XX-MM should be used with care. Read the following safety instructions to protect yourself from possible injury and
to minimize the risk of damage to the unit.
On no account should you:
Do not dismantle the housing or modify the module.
!
Dismantling the housing or modifying the module may result in electrical shock or burn.
!
Refer all servicing to qualified service personnel.
!
Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
!
or other hazards
k eep the module away from liquids.
!
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
!
to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
!
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
!
1
Page 5
www.avenview.com
Page
1.3 REGul ATORy N OTICES fEDERA l C OMMu NICATIONS COMMISSION (f CC)
This equipment has been tested and found to comply with part 15 of the f CC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
l ASER RADIATION
DO NOT STARE INTO BEAM
< 1 MIll IWATT l ASER DIODE
Cl ASS 2 l ASER pRODu CT
Risk levels increase. These lasers emit a visible beam, from
400 to 780 Nanometres (nm), with an upper power limit of 1
milliwatt. An example is a (mw) bar code scanner. Momentary
viewing is not hazardous, but extended viewing is. l aser
protective eyewear is recommended for even momentary
viewing and necessary for extended viewing
DO NOT TAMpER WITH THE f IBER CABl E; DOING SO
WIll VOID THE WARRANTy AND CONTINu ED u SE Of
THE pRODu CT.
l ASER BEAM u SED IN OpTICAl COMMu NICATIONS ARE
INVISIBl E AND CAN SERIOu Sl y DAMAGE THE Ey ES.
VIEWING IT DIRECTl y DOES NOT CAu SE ANy pAIN TO
THE Ey E Bu T SERIOu S DAMAGE CAN BE DONE TO THE
RETINA Of THE Ey E
2
Page 6
www.avenview.com
Page
INTRODu CTION
2.
Avenview fO-Dp 4K-XX-MM 4K Series fiber optic cable system lets you extend Displayport 1.2 digital signal up to 60
meters (196 feet) at 4K@60Hz (3860x2160) & (4096 x 2160) resolution.
- High Speed and long distance transmission by Optical fiber
- Compatible with Displayport standard v1.2a
- HBR(High Bit Rate) Cable Assembly (up to 5.4 Gbs Data Rate)
- Supports up to 4K@60Hz (3860x2160/4096 x 2160) resolution
- Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1ch multi-mode fiber - DpCp &
HDCp compliant( HDCp are not part of the Displayport standard)
- MMF optical fiber /copper hybrid cable structure
2.1 MODEl D ESCRIpTION
Available Models
10 meters
15 meters
20 meters
25 meters
30 meters
35 meters
40 meters
FO-DP4K-XX-MM
Model Name
Length in Meters
(5 = 5 meters, 10 = 10 meters)
EXAMPLE: FO-DP4K-10-MM
3
Page 7
www.avenview.com
Page
2.2 pACkAGE CONTENTS
Before you start the installation of the converter, please check the package contents.
Displayport Extender Cable with
1
Transmitter and Receiver X 1
2 u ser’s Manual X 1
2.3 BEf ORE INSTAll ATION
• put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
• Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
• u se the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
3. OPTICAL FIBER HAZARD
P
•
ersons installing fiber
goggles and observing warning signs.
• To ensure that the required personnel and equipment is properly installed, secure from unnecessary failure of the
components or failure of the whole system, injury to one’s self and in addition to legal responsibility; everyone is
responsible for his own health
Keep exposed optical fiber ends away from skin and eyes.
•
• The waste fragments should be treated with care and not picked up with bare hands, but rather with special gloves.
• Dispose of waste in a suitable container via an approved agency. Make sure that the quantity of optical fiber waste is
minimized.
• Closures containing termination points for optical fiber cabling must be labeled with appropriate warning signs or clearly
visible text.
• Make sure that the quantity of optical fiber waste is minimized. Closures containing termination points for optical fiber
cabling must be labeled with appropriate warning signs or a clearly viewable text.
There are four laser Classifications based on risk levels. laser manufacturers are required to label their lasers accordingly.
•
optic products must
take all necessary safety precautions, such as wearing protective clothing and
4
Page 8
www.avenview.com
Page
4.
INSTAll ATION
Avenview fO-Dp 4K-XX-MM is composed of a TX/RX, theTransmitter converts the video/audio signal of an input such as
a computer over the Optical fiber to the Receiver. The RX then decodes the trasmitted data to the connected monitor
via the displayport connector.
The Transmitter should be connected to source (Computer/media player) Displayport connector and the Receiver
should be connected to a monitor/TV with Displayport connector.
Avenview fO-Dp 4K-XX-MM is designed to self-detect the resolution of the monitor and adapt to the
resolution accordingly. follow these steps for connecting to a device:
power on your display.
1.
Connect Transmitter DP Male connector to the Source device (Laptop/PC).
2.
Connect the Receiver DP Male connector to the Display/Monitor.
3.
Once all connections are completed the BLUE LED indicator on both connectors will be activated.
4.
NOTE: Ensure when installing this product you carefully read the labels an do not mix the connections in the opposite direction.
5
Page 9
www.avenview.com
Page
5.
SpECIf ICATIONS
ITEM DESCRIPTION
UNITS
UNIT DESCRIPTION
UT/INP OUTPUT SIGNAL
VIDEO BANDWIDTH
DATA RATE
SU
PPORTED RESOLUTION
ELECTRICAL CONNECTOR
DIMENSIONS (L × W × H)*
FO-DP4K-XX-MM (Transmitter)
Displayport fiber Optic Transmitter
Displayport Signal v1.2a
21.6Gbps
5.4Gbs
4K (3840X2160 and 4096 x 2160) @ 60Hz, WQXGA (2560x1600)@60Hz
and 1080p (1920x1080)@60Hz
20 pin Displayport plug
2.95” × 1.0” × 0.8” 2.16” × 1.0” × 0.8”
FO-DP4K-XX-MM (Receiver)
Displayport fiber Optic Receiver
LENGTH AND WEIGHT
POWER CONSUMPTION
OPTical
OPTICAL SOURCE
O/E CONVERTER
CABLE TYPE
FIBER TYPE
ENViRONMENTal
OPERATING TEMPERATURE
STORAGE TEMPERATURE
RELATIVE HUMIDITY
(FO-DP4K-10-MM) 10 meters / 33 feet (3.5lbs)
(FO-DP4K-15-MM) 15 meters / 49 feet (4 lbs)
(FO-DP4K-20-MM) 20 meters / 66 feet (4.5lbs)
(FO-DP4K-25-MM) 25 meters / 82 feet (5.75lbs)
(FO-DP4K-30-MM) 30 meters / 100 feet (6.85lbs)
(FO-DP4K-35-MM) 35 meters / 115 feet (7.3lbs)
(FO-DP4K-40-MM) 40 meters / 132 feet (7.95lbs)
0.3W
850nm VCSEl
PIN photo Diode
Optical Hybrid + Copper
50/125 µm Multi-mode glass fiber OM2 or OM3 rated fiber
32˚ ~ 104˚F (0˚ to 40˚C)
-4˚ ~ 140˚F (-20˚ ~ 60˚C)
20~90% RH (no condensation)
1.39W
6
Page 10
www.avenview.com
Page
6. DISPLAYPORT PIN ASSIGNMENT
6.1 Transmitter
PIN
1 Main l ink l ane 0+ 8 Ground 15 Auxiliary Channel +
2 Ground 9 Main l ink l ane 2- 16 Ground
3 Main l ink l ane 0- 10 Main l ink l ane 3+ 17 Auxiliary Channe l -
4 Main l ink l ane + 11 Ground 18 Hot plug Detect
5 Ground 12 Main l ink l ane 3- 19 Return
6 Main l ink l ane 1- 13 Configuration 1 20 Connector power
7 Main l ink l ane 2+ 14 Configuration 2
SIGNAL
ASSIGNMENT
PIN
SIGNAL
ASSIGNMENT
PIN
SIGNAL
ASSIGNMENT
(3.3V,500mA)
6.2 Receiver
PIN
1 Main l ink l ane 0+ 8 Ground
2 Ground
3 Main l ink l ane 0- 10 Main l ink l ane 3+ 17 Auxiliary Channe -
4 Main l ink l ane 1+ 11 Ground 18 Hot plug Detect
SIGNAL
ASSIGNMENT
PIN
9
Main l ink l ane 2-
SIGNAL
ASSIGNMENT
PIN
Auxiliary Channel +
15
Ground
16
SIGNAL
ASSIGNMENT
5 Ground 12 Main l ink l ane 3- 19 Return
6 Main l ink l ane 1- 13 Configuration 1
7 Main l ink l ane 2+ 14 Configuration 2
Connector power
20
(3.3V,500mA)
7
Page 11
www.avenview.com
Page
7. FO-DP4K-XX-MM CABLE CONSTRUCTION
The construction of 4 Optical fibers and 4 Copper wires cable shall be in accordance with the Figure and Table below:
The Dimension of FO-HDM-XX-MM Cable
ITEMS
DVI CABLE MAKE-UP -
DRAIN WIRES (SIzE/STRANDED) mm(AWG) -0.203/7 (24)
AL-MyLAR SCREEN SHIELD -
CABLE OUTER DIAMETER mm 7.40±0.20
JACKET COLOR -
CABLE MARKING -
fIBER CABl E CONSTRu CTION
unit
FR-P
Item
OPTICAL
FIBER
STRENGTH MEMBER Aramid yarn
OUTER
JACKET
NOMINAL OUTSIDE DIAMETER Ø4.0±0.4mm
APPROXIMATE NET WEIGHT 10kg/km
CABLE IDENTIFICATION
Number 4
Structure
Material
Approx.Thickness 1.6mm
OPTICAl HDMB CABLE
Specification
Layer Stranding
Ahelically
VC(Orange, Blue, Black)
If needed
Description
Figure 1
FR-PVC(yellow)
8
Page 12
www.avenview.com
Page
8. MECHANICAl SpECIfICATIONS
8.1 Case Dimensions
9
Page 13
www.avenview.com
Page
8.2 Optical Cable Info
DIMENSIONS
ITEMS UNIT SPECIFICATIONS
Displayport Cable Make-up - l ayer Stranding
Drain Wires (Size/Stranded) mm(AWG) -0.203/7 (24)
Al -Mylar Screen Shield - A helically
Cable Outer Diameter Mm 7.40 ± 0.20
Jacket Color - Black
FIBER CABLE CHARA
ITEM SPE
Storage Temperature -20 ~ 70 °C Spooled
Operational Test 0 ~ 50 °C -
Max. Tensile l oad 245 N
Min. Radius Bend
Crush Resistance 490 N/50mm
CIFICATIONS
OF DISPLAYPORT CAB
CTERISTICS
25
40
UNIT CONDITION
mm
LE
10
Page 14
9. GENERAL TROUBLESHOOTING
Problem Possible Solutions
Check if the Source power is on
•
Check if connection to the computer and the monitor are correct
•
NO IMAGE
LCD SCREEN DEFECTS APPEAR
Recycle the PC power off and on again
•
•
Some graphics cards are not compatible with this unit Ensure it is 60Hz
This product supports up to 4K@60Hz (3860x2160 or 4096 x 2160)
•
resolution.
• Check the maximum resolution range of the graphics card.
Trouble Shooting depending on LED indicator status
No display TX Solid / RX Solid
- Check if monitor is powered on/Reboot Monitor
- Unplug and Reconnect the Transmitter Displayport Male connector.
No display TX Solid / RX Off
- Unplug and Reconnect the Transmitter Displayport Male connector.
10.
1.
2. put the product on even and stable location. If the product falls down or dropped, it may get damaged.
3. k eep away from high temperature (over 50°C), low temperature (under 0°C) or high humidity. It may cause a fire and
4.
CAUTION
Do not put heavy object on top of the FO-DP4K-XX-MM. It may cause product malfunction.
injury by electrical shock.
Do not twist or pull by force either ends of the optical cable. It can cause malfunction. Minimum bending diameter is
45mm.
NOTE:
Using Mini DP or HDMI/DVI converters with this unit may vary in the
performance of the specified tested results.
www.avenview.com
Page
11
Page 15
www.avenview.com
Page
Notes
12
Page 16
www.avenview.com
Page
Avenview Warranty Certificate
AVENVIEW
normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period. Avenview’s
published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications.
LABOR: During the Warranty Period of THREE (3) YEARS, Avenview will repair or replace the product(s) at no cost using new or used parts equivalent to novel performance
and reliability if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Labor applicable to product(s) after Warranty Period. For labor costs,
please contact support@avenview.com.
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if
the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact
support@avenview.com.
To obtain Warranty: (a) proof of purchase in the form of a bill of sale or receipted invoice reflecting that the registered product(s) is within warranty period must be presented
to obtain warranty service; (b) product(s) must be registered at time of purchase. Failure to do so will result in applicable parts and labor charges. Returning product(s) must
be shipped in Avenview’s original packaging or in packaging pertaining equal degree of protection to Avenview’s. Both Avenview and purchaser are responsible for freight
charges and brokerages when shipping the product(s) to the receiver.
This warranty does not apply to any non-Avenview branded product(s); non-registered Avenview product(s). This warranty does not apply: (a) to cosmetic damage, including
but not limited to scratches, dents and broken cords; (b) to damage caused by use with another product; (c) to damage caused by accident, abuse, misuse, liquid contact, fire,
earthquake or other external cause; (d) to damage caused by operating the Avenview product(s) outside Avenview’s manuals or guidelines; (e) to damage caused by service
performed by anyone who is not a representative of A venview or an Avenview authorized personnel; (f) to defects caused by normal wear and tear or otherwise due to the
normal aging of the Avenview product(s), or (g) if any serial number has been removed or defaced from the Avenview product(s).
AVENVIEW IS NOT LIABLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR
CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR
ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS;
LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATI ON; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIR ECT
OR CONSEQUENTIAL LOSS OR DAMAGE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
Some states do not allow the inclusion or limitation of incidental or consequential damages, or allow limitations on duration implements of the Warranty Period; therefore the above limitations or
exclusions may not be applicable to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
CORP. (“Avenview”) warrants Avenview-branded product(s) contained in the original packaging against defects in materials and workmanship when used
NOT COVERED BY THIS WARRANTY
odward Avenue, Kenmore, NY 14217
275 Wo
1.866.508.0269
13
Page 17
AV Connectivity, Distribution And Beyond...
TECHNICAL SUPPORT
USA Head Office
Office Avenview Corp.
275 Woodward Avenue
Kenmore, NY14217
Phone: +1.716.218.4100
Fax: +1.866.387-8764
Email: info@avenview.com
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of
Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this
documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages
in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design.
With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but
not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement.
Canada Sales
Avenview
151 Esna Park Drive, Units 11 & 12
Markham, Ontario, L3R3B1
Phone: 1.905.907.0525
Fax: 1.866.387.8764
Email: info@avenview.com
Avenview Europe
Avenview Europe
Demkaweg 11
3555 HW Utrecht
Netherlands
Phone: +31(0)85 2100 613
Email: info@avenview.eu
Avenview Hong Kong
Unit 8, 6/f., Kwai Cheong Centre,
50 Kwai Cheong Road,
Kwai Chung, N.T.
Hong kong
Phone: 852.3575.9585
Email: wenxi@avenview.com
Loading...