The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof,in any form, without the express written permission of Avenview Inc. is strictly prohibited.
Page 2
www.avenview.com
2
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
The Avenview DVI-C5-M-SET, DVI Extender over Single CAT5 Mini has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all electronic
equipment’s, the DVI-C5-M-SET should be used with care. Read the following safety instructions to protect
yourself from possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
Page 4
www.avenview.com
4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
The DVI-C5-M-SET, DVI over Single CAT5 Extender Mini extends your PC DVI transmission distance up to 25m
(80ft) at 1024x768 and 15m (50 ft) at 1920x1200 resolutions. With DVI-C5-M-SET, users can transmit high
quality digital video of PC applications through one cost effective CAT-5/5e LAN cables to the remote monitor
or projector, instead of using short and expensive DVI cables. With embedded EDID inside the adapter, your
PC will continue to send the digital video even when the monitor is not connected. The user can then
disconnects the monitor, place it in a remote location and reconnect it without rebooting the operating
system.
The DVI-C5-M-SET includes two units: transmitting and receiving units. The transmitting unit is connected to
your PC DVI output and the receiving unit is connected to the monitor. While successfully connected, the two
LED lights on the RJ-45 connector will blink. The transmission distance between the sending (transmitter) and
receiving units (receiver) can be up to 25m (80ft) at XGA (1024x768) and 15m (50ft). With compact size,
DVI-C5-M-SET is the most cost effective choice for bringing your impressive digital video to the remote display.
- DVI 1.1 compliant
- Extends the transmission length from the sources up to 25m (80ft) at 1024x768 and 15m (50ft) at
1920x1200
- Units can used as Transmitter or Receiver
- Receiving unit can learn EDID information for DVI enabled display device
- Direct plug-in at Transmitter and Receiver
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
- DVI-C5-M-S x 1
- DVI-C5-M-R x 1
- User’s Manual x 1
Page 5
www.avenview.com
5
1.6 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Page 6
www.avenview.com
6
Section 2: Specifications
Item
Description
Units
DVI-C5-M-S
DVI-C5-M-R
Unit Description
DVI Extender Transmitter
DVI Extender Receiver
DVI Compliance
1.1
Video Bandwidth
Single Link 165 MHz (4.95Gbps)
Resolution and Distance
1920x1200 @ 60Hz: ~ 15meter (80feet) (CAT5e)
1024x768: ~ 25meter (80feet) (CAT5e)
Audio Support
No
Input TMDS Signal
1.2 Volts (peak-to-peak)
Input DDC Signal
5 Volts (peak-to-peak, TTL)
Input
1 x DVI
1 x RJ45
Output
1 x RJ45
1 x DVI
DVI Connector
DVI-I (29-pin male digital only)
RJ45 Connector
WE/SS 8P8C with 2 LED indicators
Dimensions (L x W x H)
2” x 1.6” x 0.8”
2” x 1.6” x 0.8”
Power Supply
Not Required
Environmental
Operating Temperature
32˚ ~ 104˚F (0˚ to 40˚C)
Storage Temperature
-4˚ ~ 140˚F (-20˚ ~ 60˚C)
Relative Humidity
20~90% RH (no condensation)
Page 7
www.avenview.com
7
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.