Avenview DVI-C5-M-SET User Manual

Model #: DVI-C5-M-SET

DVI Extender over Single CAT5

© 2013 Avenview Inc. All rights reserved.

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes

no representations or warranties with respect to the accuracy or completeness of the contents of this publication and
reserves the right to make changes to specifications and product descriptions at any time without notice. No license,
whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set
forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any
express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.

www.avenview.com

TABLE OF CONTENTS

SECTION 1: GETTING STARTED ........................................................................................................ 3

1.1 IMPORTANT SAFEGUARDS ................................................................................................. 3

1.2 SAFETY INSTRUCTIONS...................................................................................................... 3

1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........... 4

2. INTRODUCTION ................................................................................................................. 5

2.1 PACKAGE CONTENTS ........................................................................................................ 6

2.2 BEFORE INSTALLATION ..................................................................................................... 6

2.3 APPLICATION DIAGRAM ..................................................................................................... 7

3. PANEL DESCRIPTION .......................................................................................................... 8

4. INSTALLATION (DVI-C5-M-SET) ........................................................................................ 9

5. EXAMPLE INSTALLATION FOR EXTENDED DISPLAY (HDM-C5XD-SR) ...................... 9

6. GENERAL TROUBLESHOOTING ...................................................................................... 10

SECTION 2: SPECIFICATIONS ........................................................................................................... 11

Page|2

www.avenview.com

SECTION 1: GETTING STARTED

1.1 IMPORTANT SAFEGUARDS

Please read all of these instructions carefully before you use the device. Save this manual for

future reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.



Damage, deterioration or malfunction resulting from:



Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product



modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.



Any damage of the product due to shipment.



Removal or installation of the product.



Causes external to the product, such as electric power fluctuation or failure.



Use of supplies or parts not meeting our specifications.



Normal wear and tear.



Any other causes which does not relate to a product defect.



 Removal, installation, and set-up service charges.

1.2 SAFETY INSTRUCTIONS

The Avenview DVI-C5-M-SET, DVI Extender over Single CAT5 Mini has been tested for conformance to
safety regulations and requirements, and has been certified for international use. However, like all
electronic equipment’s, the DVI-C5-M-SET should be used with care. Read the following safety
instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards

Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

Page|3

www.avenview.com

1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)

Warning symbols

Description

ONLY USE THE PROVIDED POWER CABLE

OR POWER ADAPTER SUPPLIED. DO NOT

TAMPER WITH THE ELECTRICAL PARTS.

THIS MAY RESULT IN ELECTRICAL SHOCK

OR BURN.

DO NOT TAMPER WITH THE UNIT.

DOING SO WILL VOID THE WARRANTY

AND CONTINUED USE OF THE

PRODUCT.

THE VIDEO BOARDS ARE VERY SENSITIVE

TO STATIC. PLEASE ENSURE IF RACK

MOUNTED OR INSTALLED ON A

SURFACE, IT SHOULD BE IN A GROUNDED

ENVIROMENT.

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

Page|4