Avaya AP208, AP100, AP201 User Manual

Configuration Guide

Field Verified

Meru Networks WLAN Controllers with AP100, AP201, AP208 Configuration and Deployment Guide

This document details the specifications for configuring the Meru Networks WLAN controllers and access points (APs).

Product Summary

Manufacturer:

RF technology: Direct-sequence spread spectrum (DS)

Radio: 2.4 – 2.484 GHz

Antenna Diversity: Rx Diversity

Security : WEP, WPA-PSK

AP software version: 3.1.1-24†

Handset models 3616/3620/3626 3641/3645

Radio mode 802.11b 802.11b

Maximum telephone calls per AP: 8* 8*

Auto-learn function: Yes No

Recommended network topology: Switched Ethernet (required)

† Earlier and later software versions have not been tested for the Avaya™ Voice Priority Processor compliance. Refer to Wireless IP Telephone WLAN Compatibility List for field verified AP software versions.

* Telephone calls per AP must be configured in the system per documentation provided by Avaya. Maximum 4 calls (when additional handsets are in a push-to-talk session)

Meru Networks: www.merunetworks.com

WLAN Controllers Access Points Approved product(s):

MC500

MC1000

MC3000

AP100

AP201

AP208

Known Limitations

Virtual Cell mode is incompatible with wireless IP telephone deployment. Please see the Virtual Cell information as detailed below in Deployment Guidelines.

Notes on Configuration

The AP must support SpectraLink Voice Priority (SVP). Contact your AP vendor



if you need to upgrade the AP software.