Avanti WID260P Parts List

Parts of Ice-making-Internal chamber assembly (No.5 parts in the explosion drawing of the whole
unit)

No. Parts Name Total

1 Low enclosure of the low liner 1
2 Low liner 1
3 DC water pump 1
4 Ice and water separator 1
5 Ice storing plate 1
6 Up liner 1
7 Ice-making box 1
8 Right blocking part for up liner 1

9 Step motor 1
10 Left blocking part for lower liner 1
11 Micro switch 1
12 Cam 1
13 Ice-making evaporator 1
14 2 Water pipe 1

Protecting plate for the ice-making

15

chamber
16 Water inlet pipe of the pump 1
17 Insulation sponge assembly 1
18 Sensor 1
19 Silicone pipe assembly 1
20 Insulation pipe 1

1

Parts of water dispenser-Cold and hot water tank assembly (No.6 parts in the explosion drawing of the
whole unit)

No. Parts Name Total

1 Up board 1
2 Bottom insulation foam for cold water tank 1
3 Plastic cold water tank 1
4 Hot water tank 1
5 Transformer 1
6 Water inlet valve 1
7 Ice-making valve 1
8 Side insulation foam for cold water tank 1

9 Copper pipe assembly 1
10 Water three-way connector 1
11 Silicone pipe assembly 1
12 2 Water pipe 1
13 Capillary for cold water cooling system 1
14 Capillary for ice-making cooling system 1
15 Heating element 1
16 Sponge 1
17 Thermostat, automatic 1
18 Water temperature sensor 2
19 Thermostat, hand-reset 1
20 Water separator in cold tank 1
21 Cold water evaporator
22 Fixing piece for sensor 1