INSTRUCTION MANUAL
Model Numbers/Número de Modelos:
WDE98PS
ELECTRONIC WATER DISPENSER
ENFRIADOR DE AGUA FRIA Y CALIENTE ELECTRONICO
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en español empieza en la página 13.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and
specifications without notice.
Avanti Products
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
Registration Information
Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100 days
of purchase and receive these
important benefits:
? Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to help
you refer to this information in the event of an insurance claim such as fire or theft.
? Promote better products:
We value your input. Your responses will help us develop products designed to best meet your
future needs.
----------------------------------------------------------(detach here) ---------------------------------------------------------
Avanti Registration Card
__________________________________ _____________________________________
Name Model # Serial #
__________________________________ _____________________________________
Address Date Purchased Store/Dealer Name
__________________________________ ______________________________________
City State Zip Occupation
__________________________________ As Your Primary Residence, Do You:
Area Code Phone Number ?Own ?Rent
Did You Purchase An Additional Warranty: Your Age:
?Extended ?None ?under 18 ?18-25 ?26-30
Reason For Choosing This Avanti Product: ?31-35 ?36-50 ?over 50
Please indicate the most important factors Marital Status:
that influenced your decision to purchase ?Married ?Single
this product. Is This Product Used In The:
?Price ?Home ?Business
?Product Features How Did You Learn About This Product:
?Avanti Reputation ?Advertising
?Product Quality ?In Store Demo ?Personal Demo
?Salesperson Recommendation ?Other______________________________
?Friend/Relative Recommendation Comments____________________________
?Warranty _____________________________________
?Other_______________________ _____________________________________
2
HELP US HELP YOU
Read this guide carefully.
It is intended to help you operate and maintain
your new water dispenser properly.
Keep it handy to answer your questions.
If you don't understand something or you need
more assistance please call:
Avanti Customer Service
800 -220-5570
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
IF YOU NEED SERVICE
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further assistance.
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In
most cases, this will solve the problem.
Write down the model and serial numbers.
You'll find them on a label located on the back
side of the unit.
Please write these numbers here:
____________________________________
Date of Purchase
____________________________________
Model Number
____________________________________
Serial Number
Use these numbers in any correspondence or
service calls concerning your water dispenser.
If you received a damaged water dispenser,
immediately contact the dealer (or builder) that
sold you the water dispenser.
Save time and money. Before you call for
service, check the Trouble Shooting Guide. It
lists causes of minor operating problems that
you can correct yourself.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send it to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172
3
PARTS AND FEATURES
1. WATER INTAKE
2. TOP COVER
3. CONTROL AND DISPLAY PANEL
4. HOT WATER BUTTON WITH CHILD
SAFETY BUTTON (RED)
5. COLD WATER BUTTON (BLUE)
6. HOT WATER FAUCET
7. COLD WATER FAUCET
8. FRAME
9. REMOVABLE DRIP TRAY COVER
10. REMOVABLE DRIP TRAY
11. STORAGE COMPARTMENT
12. CONDENSER
13. HOT WATER DRAIN
15. POWER SUPPLY CORD
4
TABLE OF CONTENTS
Registration Information________________________________ _________________________________2
Help Us Help You ______________________________________________________________________3
Parts And Features ____________________________________________________________________4
Table Of Contents ________________________________________________________________ _____5
Important Safety Instructions _____________________________________________________________6
Installation Guidelines:__________________________________________________________________ 6
Before Using Your Water Dispenser _______________________________________________________6
Operating Your Water Dispenser _________________________________________________________7
Steps To Replace Water Bottles__________________________________________________________7
Electronic Controls _____________________________________________________________________8
Care And Mai ntenance _________________________________________________________________9
Taking Dispenser Out Of Service _________________________________________________________9
Troubleshooting Guide_________________________________________________________________10
Service For Your Water Dispenser _______________________________________________________10
Your Avanti Products Warranty________________________________ __________________________11
Wiring Diagram________________________________________________________________ _______12
Instrucciones En Español ___________________________________________________________ 13-16
5
Important Safety Instructions
? WARNING ?
To reduce the risk of fire, electrical shock,
or injury when using your appliance, follow
these basic precautions:
? Read all instructions before using the water dispenser.
? Never clean parts with flammable fluids. The fumes can create a fire hazard or
explosion.
? Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other water dispenser. The fumes can create a fire hazard or
explosion.
-Save these instructions-
INSTALLATION GUIDELINES:
? Remove the exterior and interior packing.
? Place your appliance on a floor that is strong enough to support the dispenser when it is fully
loaded. The unit is provided with four plastic feet, if it does not sit level on the floor, adjust the front
feet to level the unit well to the floor.
? Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the appliance not to perform
properly.
? Allow 2 inches of space between the water dispenser and the wall, which allows for proper air
circulation to cool the compressor.
? Plug the appliance into an exclusive properly installed -grounded wall outlet. Do not cut or remove the
third (ground) prong from the power cord under any circumstances. Any questions concerning power
and/or grounding should be directed toward a certified electrician or an authorized Avanti Products
service center.
? This water dispenser is not recommended for outdoor use.
? Do not locate the dispenser in area where the temperature may fall below freezing (32º F).
? Keep area around dispenser free of dust and dirt.
? Keep the reserve supply of water bottles away from excessive heat and light.
? Never unplug the water cooler, except for maintenance.
OPERATION INSTRUCTIONS:
Before Using Your Water Dispenser
? Check to be sure the following parts are included:
? Instruction manual
? Cup dispenser
? 2 extra cup dispenser cabinet plugs
? 2 extra drain seals
? Accessories order form
? Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
? The water dispenser is pre -cleaned at the factory but the reservoir and water lines must be flushed
with fresh water before use as follows:
? Keep the unit unplugged.
? Fill water tank with tap water full to capacity. Wait for 5 minutes until water settles.
6
? Slide child safety button then push the hot water faucet until water comes out, then stop.
? Plug the dispenser into the electric al outlet. We are ready to complete the first cycle. In order to do
that, wait for the hot water to reach temperature in approximately 10 minutes, and then wait for the
cold to reach temperature (another 40 minutes, approximately).
? Unplug the dispenser from the electrical outlet. Proceed to drain the water from the faucets one at a
time until no more water remains.
(Note: To facilitate this operation, use a large container).
? Then, drain any water left in the tanks by opening the drain plug located on the back, until it drains
completely.
? Proceed to close the drain cap.
? Remove the cap from the 5-gallon bottle and use a clean cloth to wipe off the neck of the bottle.
? Place the 5-gallon bottle of water on the water intake, allow water to stand for approximately one
minute.
? Push water faucet buttons to insure water flows from both faucets.
? Plug dispenser back into the electrical outlet.
? Now you are ready to use your water dispenser.
NOTE: Your water dispenser has been cleaned and sanitized before leaving the
factory, but in case a taste problem develops, place two tablespoons of
baking soda and add tap water. Fill water tank again and repeat basic
operations previously outlined, except turn hot water function “OFF” to
avoid leaving residues in hot water tank.
ATTENTION:
If you do not plan to use the water heating function for more than three days, we
recommend that you turn off the hot water function.
IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF
THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS
SERVICE CENTER.
?WARNING ?
OPERATING YOUR WATER DISPENSER
Steps To Replace W ater Bottles
? Remove cap.
? Use a clean cloth to wipe off neck of bottle.
? Carefully lift bottle (approx. 40 lbs.) using your legs and not your back. Do not place hands on
opening of bottle while placing in reservoir.
? Insert the water bottle on the water intak e over reservoir opening so it settles properly on it.
? Wipe off any water which may have splashed on dispenser top.
? When a new bottle is installed you must open the hot water faucet and remove no less than 4 full
cups of water to insure the water flows pro perly and the water reservoir is at the proper level.
When a new bottle is installed you must open the hot water faucet and remove no less than 4 full cups of
water to insure the water flows properly and the water reservoir is at the proper level.
7
Electronic Controls
NOTE: At any time during the program set up, if no activity is chosen the screen will reset after 10
seconds have passed.
POWER Function:
Press Power button once to power un it ON. The unit is in stand-by mode and the time will be displayed
on the upper left corner of the display window. To switch OFF the power, just push the Power button
again.
Clock Display
Press the SET button to adjust the time. Once pressed, the time will flash. Using the HOT (+) or COLD
(-) buttons you can adjust the “hour” display AM / PM. Press the SET button again to adjust the
minutes. Using the HOT (+) or COLD (-) buttons you can adjust the “minutes” display.
Wait for the display to stop blinking (approximately 10 seconds).
TEMPERATURE DISPLAY
HOT Function.
Press the HOT button once to turn on the hot function.
Press the SET button (3 times) the amber numbers appear on the left side of the display panel. Using
the HOT (+) or COLD (-) bu ttons you can adjust the temperature to the desired setting. Wait for the
display to stop blinking (approximately 10 seconds).
COLD Function
Press the COLD button once to turn on the cold function.
Press the SET button (4 times) the blue numbers appear on the right side of the display panel. Using the
HOT (+) or COLD (-) buttons you can adjust the temperature to the desired setting. Wait for the display
to stop blinking (approximately 10 seconds).
NOTE: Once the selected temperature is reached, the readout will display it. Since it may take a while to
reach the selected temperature, you will be able to see in numerical sequence (plus or minus) other
temperature readings.
COLD Water temperature range is from 41ºF-59F (5ºC-15ºC). The factory-preset setting is 6ºC/ 45ºF.
HOT Water temperature rang e is from 122ºF-198ºF (50ºC-92ºC). The factory-preset setting is
91ºC/196ºF.
Cº/Fº Function:
Press Cº/Fº button to convert temperature display from Celsius to Fahrenheit or visa versa.
8
Overheating Alarm Function:
If the unit is heated without water, then the overheating alarm signal will flash on the display screen. An
“Er…” error message will be displayed on the screen. In such case the power supply of heating process
is cut off. Check the water supply and reset the heating.
NOTE:
THE HOT WATER FAUCET HAS A CHILD -SAFETY GUARD ATTACHMENT.
To get hot water:
? Slide safety button on faucet up.
? Continue holding safety button while pushing in hot water faucet as long as water is being
dispensed.
? Once released, the safety button will return to the original position.
Cup Dispenser
A cup dispenser may be installed by using the mounting holes (covered with plastic caps) located near
the top of the right side panel of the cooler. The cup dispenser comes equipped with a mounting bracket
and screws and may be ordered by completing the enclosed order form provided with your instruction
manual.
CARE AND MAINTENANCE
? Wash the inside of the reservoir with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water. (Turn off the hot water function).
? The drip tray and water faucets should be cleaned with mild detergent and warm water.
? At regular intervals or once a month inspect the coils located across the back of the dispenser.
Vacuum accumulation of dust or clean it with a hard brush.
TAKING DISPENSER OUT OF SERVICE
? If the water dispenser will not be used for a long period of time, unplug the power cord from the wall
outlet.
? Turn off the hot water.
? Drain the water through the faucets.
? Drain the water from the tanks by removing the plug from the back of the dispenser.
WARNING—THE WATER COMING OUT OF THE BAC K MAY BE SCOLDING HOT.
? Unit should NOT be transported on the units side. Place it upright if possible and cover it with a
blanket.
9
PROBLEMS WITH YOUR WATER DISPENSER?
You can solve many common water dispenser problems easily, saving you the cost of a
possible service call. Try the suggestions outlined below to see if you can solve the problem
before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE
Water dispenser does not operate.
Water cooler is not cold enough. Check to be sure the cold feature is selected.
Water dispenser hot water is not hot enough. Check to be sure the hot feature is selected.
Compressor turns on and off frequently.
Vibration. Check to assure that the water dispenser is level.
The water dispenser seems to make too much
noise.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The water dispenser does not have the correct
clearances.
The room temperature is hotter than normal.
The temperature control is not set correctly.
The water dispenser does not have the correct
clearances.
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
water dispenser.
Contraction and expansion of the inside walls may
cause popping and crackling noises.
The water dispenser is not level.
SERVICE FOR YOUR WATER DISPENSER
We are proud of our customer service organization and the network of professional service technicians
that provide service on your Avanti appliances. With the purchase of your Avanti appliance, you can be
confident that if you ever need additional information or assistance, the Avanti Products Customer
Service Team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
800-323-5029
Part Orders
800-220-5570
In-Home Repair Service
800-220-5570
Whatever your questions are about our products,
help is available.
You may order parts and accessories that will be
delivered directly to your home, by personal
check, money order, Master Card, or Visa.
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your appliance inside and out.
10
YOUR Avanti Products WARRANTY Staple your sales receipt here. Proof of
original purchase date is needed to obtain
service under warranty.
WHAT IS COVERED
LIMITED ONE-YEAR
WARRANTY
For one year from the date of purchase
by the original owner, Avanti Products
will, at its option, repair or replace any
part of the appliance which proves to be
defective in material or workmanship
under normal use. During this period
Avanti Products will provide all parts
and labor necessary to correct such
defects free of charge, so long as the
appliance has been installed and
operated in accordance with the written
instructions in this manual. In rental or
commercial use, the warranty period is
90 days.
WHAT IS NOT COVERED
? Incidental or consequential damages.
? Parts and labor costs for the following will
not be considered as warranty:
? Light bulbs and/or plastic housing.
? Plastic cabinet liners.
? Punctured evaporator that voids the
warranty on the complete sealed system.
? Replacement of house fuses or resetting
circuit breakers.
LIMITED SECOND THROUGH
FIFTH YEAR WARRANTY
For the second through the fifth year from date
of original purchase, Avanti Products will
provide a replacement compressor free of
charge due to a failure. You are responsible for
the service labor and freight charges. In rental or
commercial use, the limited compressor
warranty is one year and nine months. Cost to
move the appliance to the servicers’ shop and
back to the users’ home, as may be required,
are the users’ responsibility.
? Repairs performed by unauthorized
servicers.
? Surcharges including, but not limited to,
any after hour, weekend, or holiday service
calls, tolls, ferry trip charges, or mileage
expense for service calls to remote areas,
including the State of Alaska.
? Service calls that do not involve defects in
material or workmanship such as customer
education, or improper installation.
? Service calls that are related to external
problems, such as abuse, misuse,
inadequate electrical power, accidents, fire,
floods, or acts of God.
? Failure of the product if it is used for other
than its intended purpose.
? This warranty does not apply outside the
continental U.S.A.
11
WIRING DIAGRAM
12
INSTRUCCIONES EN ESPAÑOL
AVISO:
ESTE GRIFO DE AGUA CALIENTE TIENE UN ADAPTADOR DE SEGURIDAD PARA NI ÑOS.
PARA OBTENER AGUA CALIENTE:
? MUEVA EL BOTON DE SEGURIDAD (COLOR ROJO) HACIA ARRIBA.
? MANTENGA AGARRADO ESE BOTON ROJO MIENTRAS QUE APRIETA EL GRIFO.
? CUANDO SUELTE EL GRIFO, EL BOTON DE SEGURIDAD RETORNARA A LA POSICION
ORIGINAL.
DIRECCIONES BASICAS DE OPERACION:
? COLOQUE EL ENFRIADOR DE PIE POR UN PERIODO DE DOS HORAS ANTES DE
ENCHUFAR LA UNIDAD A LA PARED.
? COLOQUE EL ENFRIADOR EN UN AREA BIEN VENTILADA Y DEJE UN ESPACIO DE UN
POCO MAS DE DOS PULGADAS ENTRE LA UNIDAD Y LA PARED.
? ESCOJA UN LUGAR CON PISO NIVELADO.
? NO COLOQUE EL ENFRIADOR DONDE LA TEMPERATURA AMBIENTAL PUEDA BAJAR DE
32°F (0°C).
ANTES DE ENCHUFARLO
AUNQUE EL ENFRIADOR SALE LIMPIO DE LA FABRICA, DEBE LIMPIAR Y ESTERILIZAR LOS
CONDUCTOS DEL TANQUE Y LOS GRIFOS DE ACUERDO A LOS SIGUIENTES PASOS:
? LLENE EL TANQUE DE AGUA (HASTA EL TOPE) CON AGUA DE LA PILA.
? DEJE NIVELAR EL AGUA POR 5 MINUTOS.
? EMPUJE EL BOTON ROJO DE AGUA CALIENTE HASTA QUE SALGA AGUA Y SUELTELO
INMEDIATAMENTE.
? ENCHUFE LA UNIDAD A LA PARED.
? ESPERE QUE EL AGUA CALIENTE LLEGUE A LA TEMPERATURA PROGRAMADA. (APROX.
10 MINUTOS - 3 SONIDOS).
? EMPUJE EL BOTON AZUL DE AGUA FRIA HASTA QUE SALGA AGUA Y SUELTELO
INMEDIATAMENTE.
? ESPERE QUE EL AGUA FRIA LLEGUE A LA TEMPERATURA PROGRAMADA (APROX. 40
MINUTOS).
? DESCONECTE LA UNIDAD DE LA PARED.
? EMPIECE A DRENAR LOS GRIFOS UNO A LA VEZ HASTA QUE SALGA EL ULTIMO CHORRO
DE AGUA.
? EN LA PARTE TRASERA DE LA UNIDAD ENCONTRARA UNA TAPA PLASTICA. GIRE HACIA LA
IZQUIERDA LA TAPA HASTA QUE SALGA EL ULTIMO CHORRO.
? CUANDO NO SALGA MAS AGUA DE LA APERTURA, CIERRE LA TAPA PLASTICA.
? COLOQUE EL BOTELLON LLENO DE AGUA EN LA APERTURA DEL TANQUE.
? ENCHUFE LA UNIDAD. AHORA SU ENFRIADOR ESTA LISTO PARA SU USO.
CONTROLES ELECTRONICOS
FUNCION DE ENCENDIDO
PRESIONAR EL BOTON ON/OFF (ENCENDIDO/APAGADO) UNA VEZ PARA ENCENDER LA
UNIDAD. LA UNIDAD ESTA EN STAND-BY (MODO DE ESPERA) Y LA HORA SE PUEDE VER EN
13
LA ESQUINA SUPERIOR IZQUIERDA DE LA PANTALLA. PARA APAGAR LA UNIDAD, SOLO
PRESIONE EL BOTON ON/OFF DE NUEVO.
RELOJ
PRESIONE EL BOTON SET PARA AJUSTAR LA HORA. UNA VEZ PRESIONADO, LOS NUMEROS
QUE INDICAN LA HORA EMPEZARAN A PARPADEAR. USANDO LOS BOTONES HOT (+) O COLD
(-) PODRA ADJUSTAR LA HORA. PRESIONE EL BOTON SET DE NUEVO PARA AJUSTAR LOS
MINUTOS. USANDO LOS BOTONES HOT (+) O COLD (-) PODRA AJUSTAR LOS MINUTOS.
TEMPERATURA
FUNCION HOT (CALIENTE)
PRESIONE EL BOTON MARCADO “HOT”.
PRESIONE EL BOTON SET 3 VECES HASTA QUE LOS NUMEROS AMBAR APAREZCAN EN EL
LADO IZQUIERDO DE LA PANTALLA. USANDO LOS BOTONES HOT (+) O COLD (-) PODRA
AJUSTAR LA TEMPERATURA AL NIVEL DESEADO.
FUNCION COLD (FRIA)
PRESIONE EL BOTON MARCADO “COLD”.
PRESIONE EL BOTON SET 4 VECES HASTA QUE LOS NUMEROS AZULES APAREZCAN EN EL
LADO DERECHO DE LA PANTALLA. USANDO LOS BOTONES HOT (+) O COLD (-) PODRA
AJUSTAR LA TEMPERATURA AL NIVEL DESEADO.
ADVERTENCIA:
UNA VEZ QUE PRESIONE EL BOTON SET, TIENE 10 SEGUNDOS PARA AJUSTAR LA HORA O LA
TEMPERATURA, DE LO CONTRARIO LA PANTALLA SE B ORRARA.
LA TEMPERATURA PARA EL AGUA FRIA (COLD) VA DESDE 39º F – 50º F (4º C –10º C). LA
TEMPERATURA DE FABRICA ES 6ºC / 43º F.
LA TEMPERATURA PARA EL AGUA CALIENTE (HOT) VA DESDE 185º F – 194º F (85º C – 90º C). LA
TEMPERATURA DE FABRICA ES 88º C / 190º F.
FUNCION Cº/Fº
PRESIONE EL BOTON Cº/Fº PARA MOSTRAR LA TEMPERATURA DE CELSIUS A FARENHEIT Y
VICEVERSA.
PASOS RECOMENDADOS PARA CAMBIAR EL BOTELLON
? QUITE EL BOTELLON VACIO.
? LIMPIE EL CUELLO DEL BOTELLON NUEVO CON UN PAÑO LIMPIO.
? LEVANTE EL BOTELLON HACIENDO FUERZA CON LAS PIERNAS Y NO LA ESPALDA.
? TOME EL BOTELLON POR LOS LADOS Y DIRIJA EL CUELLO DEL MISMO HACIA LA
APERTURA DEL TANQUE.
? VOLTEE EL BOTELLON COMO SI FUERA A SOLTAR AGUA E INSERTE EL CUELLO DEL
BOTELLON EN LA APERTURA DEL TANQUE HASTA QUE SE COLOQUE EN LA POSICION
CORRECTA.
MANTENIMIENTO
? A INTERVALOS REGULARES (UNA VEZ AL MES), INSPECCIONE EL CONDENSADOR O
REJILLA DE ALAMBRE LOCALIZADA EN LA PARTE TRASERA DE LA UNIDAD.
? ANTES DE EFECTUAR LA LIMPIEZA, DESENCHUFE EL ENFRIADOR. USE UNA ASPIRADORA
O UN CEPILLO DURO PARA QUITAR EL POLVO.
? PARA LIMPIAR LAS PARTES DE PLASTICO SE REQUIERE JABON LIQUIDO Y AGUA TIBIA. NO
USE LIMPIADORES ABRASIVOS EN LA SUPERFICIE SUPERIOR NI EN LA BANDEJA DE
ESCURRIMIENTO.
14
SI NO VA A USAR EL ENFRIADOR POR UN TIEMPO PROLONGADO
? DESENCHUFE LA UNIDAD.
? QUITE EL BOTELLON DE AGUA.
? DRENE EL AGUA ABRIENDO LOS GRIFOS.
? DRENE LA APERTURA EN LA PARTE TRASERA QUITANDO EL TAPON.
? EL ENFRIADOR DEBE TRANSPORTARSE PARADO Y CUBIERTO CON UNA FRAZADA PARA
EVITAR QUE SE RAYE.
CENTRO DE SERVICIOS
LA MAYORIA DE LOS PROBLEMAS SE RESUELVEN CON UNA SIMPLE LLAMADA
TELEFONICA A NUESTRO NUMERO SIN CARGO.
1-800-220-5570
ANTES DE DEVOLVER EL PRODUCTO O PARA OBTENER LA DIRECCION Y NUMERO DE
TELEFONO DEL CENTRO DE SERVICIO MAS CERCANO LLAME AL SIGUIENTE NUMERO.
1-800-220-5570
POSIBLES PROBLEMAS CAUSA
DERRAME DE AGUA POR FUERA DEL
ENFRIADOR
EL AGUA NO ESTA SUFICIENTEMENTE FRIA. SU TEMPERATURA DEBERIA SER DE 5? A 7?
EL AGUA NO ESTA SUFICIENTE CALIENTE SU TEMPERATURA DEBERIA SER DE 80? A
EL ENFRIADOR NO ENFRIA O CALIENTA EL
AGUA
LA BOTELLA ESTA PERFORADA REEMPLACELA
C CON UNA TEMPERATURA AMBIENTE DE
20? C. SI NO ES ASI, LLAME AL CENTRO DE
SERVICIO, EL TERMOSTATO PODRIA ESTAR
DEFECTUOSO.
90? C CON UNA TEMPERATURA AMBIENTE
DE 20? C. SI NO ES ASI, LLAME AL CENTRO
DE SERVICIO, EL TERMOSTATO PODRIA
ESTAR DEFECTUOSO.
VERIFIQUE LOS CIRCUITOS, FUSIBLES O
DISYUNTORES.
PRINTED IN CHINA
15
Loading...