WINE CHILLER
INSTRUCTION MANUAL
MANUAL DE INSTRUCC I O NE S
Model Number/ No. de Modelo:
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en español empieza en la página 13.
Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and
specifications without notice.
Avanti Products, A Division of The Mackle Co ., Inc.
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
WC494D
Table of Contents
Wine Chiller Safety 3
Important Safeguides 4
Help Us Help You 5
Parts and Features 6
Important Safety Instructions 7
Installation Instructions 7
Before Using Your Wine Chiller 7
Installation of Your Wine Chiller 7
Electric al Connection 8
Reversing the Door Swing of Your Appliance 8
Operating Your Wine Chiller 8
Setting th e T em perature Co n t rol 8
How to Choose the Celsius or Fahrenheit Degree
Interior Light 9
Door Lock
Care and Maintenance 9
Cleaning Your Wine Chiller 9
Power Failure 9
Vacation Time 9
Moving Your Wine Chiller 9
Energy Saving Tips 9
Problems with Your Wine Chiller? 10
Troubleshooting Guide 10
Service for Your Wine Chiller 11
Wiring Diagram 11
Your Avanti Products Warranty 12
Instrucciones en Español 13 – 15
Registration Information and Registration Card 17
9
9
2
WINE CHILLER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always
read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety
Alert Symbol and either the wards” DANGER”, “WARNING” o r “CAUTION”.
Danger means that failure to heed this
safety statement may result in severe
personal injury or death.
Warning means that failure to heed this
safety statement may result in extensive
product damage, serious personal injury, or
death.
Caution means that failure to heed this
safety statement may result in minor or
moderate personal injury, or property or
equipment damage.
All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of
injury, and let you know what can happen if the ins tructions are not followed.
3
IMPORTANT SAFEGUARDS
Before the wine chiller is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the wine chiller, follow basic precautions,
including the following:
• Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do
not use an extension cord
• Replace all panels before operating
• It is recommended that a separate circuit, serving only your wine chiller, be provided. Use
receptacles that cannot be turned off by a switch or pull chain
• Never clean wine chiller parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other fl ammable vapors and liquids in the vicinity of
this or any other appliance. The fumes can create a fire hazard or explosion.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit
is disconnected.
• Do not connect or disconnect the electric plug when your hands are wet
• Unplug the wine chiller or disconnect the power before cleani ng or servicing. Failure to do so can
result in electrical shock or death.
• Do not attempt to repair or replace any part of your wine chiller unless it is specifically recommended
in this material. All other servicing should be referred to a qualified technician.
• Use two or more people to move and install the wine chiller. Failure to do so can result in back or
other injury.
• To ensure proper ventilation for your wine chiller, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperat ures above 55
0
C). This unit must be installed in an area protected from the elements , such as wind, rain,
(32
0
F (130C) and below 900F
water spray or sunlight.
• The wine chiller should not be located next to ovens, grills or other sources of high heat.
• The wine chiller must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
• Do not kink or pinch the power supply cord of the wine chiller.
• The fuse (or circuit breaker) size should be 15 amperes.
• It is important for the wine chiller to be leveled in order to work properly. You may nee d to make
several adjustments to level it.
• All installation must be in accordance with local plumbing code requirements.
• Make certain that the pipes are not pinched or kinked or damaged during installation.
• Check for leaks after connection.
• Never allow children to operate, play with or crawl inside the wine chiller
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage
or discolor the interior.
• Do not use this apparatus for other than its intended purpose.
4
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain
your new Wine Chiller properly.
Keep it handy to answer your questions.
If you don't understand something or you
need more assistance, please call:
Avanti Customer Service
800 - 220 - 5570
Keep proof of original purchase date (suc h as
your sales slip) with this guide to establish the
warranty period.
CAUTION:
THIS WINE CHILLER IS NOT
DESIGNED FOR THE STORAGE
OF MEDICINE OR OTHER
MEDICAL PRODUCTS.
IF YOU NEED SERVICE
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further assistance.
FIRST, co ntact the people who s erviced your
Wine Chiller. Explain why you are not pleased.
In most cases, this will solve the problem.
Write down the model and serial numbers.
You'll find them on a plate located on the rear
outside wall of the Wine Chiller.
Please write these numbers here:
____________________________________
Date of Purchase
____________________________________
Model Number
____________________________________
Serial Number
Use these numbers in any correspondence or
service calls concerning your Wine Chiller.
If you received a damaged Wine Chiller,
immediately contact the dealer (or builder) that
sold you the Wine Chiller.
Save time and money. Before you call for
service, check the Troubleshooting Gui de. It
lists caus es of minor oper a ting problem s that
you can correct yourself.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send it to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172 USA
5