WINE COOLER
INSTRUCTION MANUAL
Model Numbers:
WC260YGW/B
CAUTION:
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY
RULES AND OPERATING INSTRUCTIONS.
Avanti Products, A Division of The Mackie Co.,Inc.
P. O. Box 520604 - Miami, Florida 33152
WWW. avanti products, com
HELP US HELP YOU...
Read thia guide carefully. Write down the model and serial
It is intended to help you operate and numbers,
maintain your new wine cooler properly.
You'll find them on a label located on
Keep it handy to answer your ques- the back side of the unit,
tions.
If you don't understand something or Please write these numbers here:
you need more help, please call:
Date of Purchase
Avanti Customer Service
800-220-5570
Model Number
Keep proof of original purchase date
(such as your sales slip or cancelled
check) with this guide to establish the
warranty period.
CAUTION:
THIS WINE COOLER IS NOT
DESIGNED FOR THE STORAGE OF
MEDICINE OR OTHER MEDICAL
PRODUCTS.
IF YOU NEED SERVICE
We’ re proud of our service and want
you to be pleased. If for some reason
you are not happy with the service
you receive, here are some steps to
follow for further help.
FIRST, contact the people who ser
viced your appliance. Explain why you
are not pleased. In most cases, this
will solve the problem.
Serial Number
Use these numbers in any correspon
dence or service calls concerning your
wine cooler.
If you received a damaged wine cool
er, immediately contact the dealer(or
builder)that sold you the wine cooler.
Save time and money. Before you call
for service, check the Problem Solver
Guide, it lists causes of minor operating
problems that you can correct yourself.
NEXT, if you are still not pleased, write
all the details, including your telephone
number, and send to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172
Table of Contents
Warranty Information and Registration Card
Help Us Help You.........................................................................................1
Parts and Features ......................................................................................2
Important Safety Instructions
Installation Instructions...............................................................................4
Before Using Your Wine Cooler..................................................................4
Installation of Your Wine Cooler.................................................................4
Installing the Door Handle ..........................................................................5
Reversing the Door Swing of Your Wine Cooler
Operating Your Wine Cooler ....................................................................--e
Temperature Control ...................................................................................6
Care and Maintenance.................................................................................7
Cleaning Your Wine Cooler.........................................................................7
Maintenance of Your Wine Cooler..............................................................7
Vacation Time ..............................................................................................7
Moving Your Wine Cooler ...........................................................................7
Troubleshooting Guide................................................................................8
Service For Your Wine CoolerYour Avanti Products Warranty
WC260YGW/B Parts Breakdown
....................................................................
.......................................
...................................................................
..............................................................
.............................................................
9
11
4
5
9
WC260YGW/B Parts List.......................................................................... 12
WC260YGW/B Wiring Diagram..................................................................13
Important Safety Instructions
To reduce the risk of fire, electrical
A WARNING y
• Read all in
• Child entra
abandoned ai
garage a few
• If you are
safety booklet
prevent accidc
• Never allow
• Never clean
fire hazard or
• Do not sto
the vicinity of
or explosion.
INSTALLATION INSTRUCTIONS
^ Before Using Your Wine Cooler
Installati
>
Etructions before using the appliance.
pment and suffocation are not problems of the past. Junked or
ppliances are still dangerous... even if they will"just sit in the
days.”
getting rid of your old appliance, do it safely. Please read the
from the Association of Home Appliance Manufacturers-. Help
nts.
children to operate, play with, or crawl inside the appliance,
appliance parts with flammable fluids. The fumes can create a
explosion.
re
• Remo’
• Check
1 de
•4s
do
• 1
• Insth
• Befot
right
malfdn
• Clean
on of Your Wine Cooler
Placé Your appliance on a floor that is strong enough to support the
appliance when it is fully loaded. To level your appliance, adjust the legs
at the front of the appliance.
• Allow 5 inches of space between the back and sides of the appliance,
whicf allows the proper air circulation to cool the compressor.
• Locate the appliance away from direct sunlight and sources of heat
(stov3, heater, radiator, etc.) . Direct sunlight may affect the acrylic
coatirig and heat sources may increase electrical consumptioa Extreme
or use gasoline or any other flammable vapors and liquids in
this or any other appliance. The fumes can create a fire hazard
- Save these instructions -
ive the exterior and interior packing,
to be sure the following parts are included:
out shelves
or handle with two Phillips screws
uction manual
e connecting the appliance to the power source, let it stand upfor approximately 2 hours. This will reduce the possibility of a
iction in the cooling system from handling during transportation,
the interior surface with lukewarm water using a soft cloth,
shock, or injury when using your appli
ance, follow these basic precautions:
cold ambient temperatures may also cause the appliance not to perform
properly.
»Avoid locating the appliance in moist areas. Too much moisture in the air
will cause frost to form quickly on the evaporator, requiring more frequent
defrosting of the wine cooler.
» Plug the appliance into an exclusive properly installed - grounded wall
outlet. Do not under any circumstances cut or remove the third (ground)
prong from the power cord. Any questions concerning power and or
grounding should be directed toward a certified electrician or an autho
rized Avanti Products Service center.
y Warning y
improper use of the grounded plug can result in the risk of electrical shock. If
the power cord is damaged, have it replaced by an authorized Avanti Prod
ucts service center.
^ Installing the Door Handle
• Place the handle over the two holes in the
upper left side of the door.
• Attach using the two Phillips screws provided.
^ Reversing the Door Swing of Your Wine Cooler
This wine cooler has the capability of either opening the door from the left or right
side. The unit is delivered to you with the door opening from the left side. Should
you desire to reverse the opening direction, please follow these instructions.
NOTE:
All parts removed must be saved to do the reinstallation of the door.
Removal of the Wine Cooler Door
• Remove the upper hinge cap(1 ).
• Using a sharp object, pry out the two plug
buttonsdO).
• Remove the two Phillips screws{2) that
connect the upper hinge (3) on the right
side of the cabinet top.
• Carefully lift the door, placing it on a
padded surface to avoid scratching.
• Remove the plug (9) and transfer it to the
uncovered hole at the right side. Be sure
to press the button firmly into the hole
• Remove the two bolts (7) that hold the lower
hinge ) on the right side.
• Remove the adjustable leveling leg(8) and transfer it to the right side.
• Reattach the lower hinge(4) on the left side by attaching the adjustable
leveling leg (8) and two bolts (7).
Reversal and Installation of Wine Cooler Door
• Set the
enters
• While
hinge u
the upp
• Before
cabine
• Repla
• Replad
corner
• Chang
Changinc
• Remov
• Place
the
• Reattat
NOTE:
Before ti
the top
wine cooler door in its new position, making sure the hinge Pin
Ihe bushing at the bottom of the cabinet.
holding the door in the closed position, loosely secure the upper
sing the two Phillips screws. Be sure the pin enters the bushing at
er and lower frame section (holes).
tightening the screws, be sure the top of the door is level with the
top.
the upper hinge cover(1).
ce
e the two plug buttons(IO) in the holes now on the top right
of the unit.
3 the position of the handle
the Position of the Handle
e the two Phillips screws attaching the handle.
Ihe handle over the two holes located on the upper right corner of
r.
doo
h using the two Phillips screws.
ightening these screws, make sure the top of the door is level with
or the cabinet.
OPERATING YOUR WINE COOLER
^ Temperature Control
• The firs
• The s
• To turr
NOTE:
• Turning
• If the
t time you turn thè unii on . set thè temperature control to "MAX”
positior
eltings of the temperature control are“OFF”, “MIN”, "NORMAL"
ryiAX” . After 20 minutes, adjust the temperature control setting to
and
"norNi
flee wir
but doE
AL". The setting of'NORMAL" should be correct for home or of-
e cooler use.
the wine cooler off, turn the temperature control to“OFF”.
the temperature control to“OFF”position stops the cooling cycle,
■s not shut off the power to the wine cooler.
Onit is unplugged, power lost, or turned off, you must wait 3 to 5
minutes before restarting the unit. If you attempt to restart before this
time delay, the wine cooler will not start.
•The range between“M!N”and“MAX”is from 48°F to 61 "F, which is ideal
for the storage of wines at the " NORMAL" setting.
CARE AND MAINTENANCE
^ Cleaning Your Wine Cooler
• Turn the temperature control to‘‘OFF”, unplug the wine cooler, and re
move the bottles.
• Wash the inside with a warm water and baking soda solution. The solu
tion should be about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves and trays with a mild detergent solution.
• The outside of the wine cooler should be cleaned with mild detergent and
warm water.
• It may also be necessary to periodically wipe the bottom part of the
storage area, as the wine cooler is designed to retain humidity, and
condensation may collect there.
• Dry the water collection tray located above the compressor in the back of
the unit. Once dry, place it back to its original position.
^ Maintenance of Your Wine Cooler
• Power Failure
Most power failures are corrected within a few hours and should not affect
the temperature of your wine cooler if you minimize the number of times
the door is opened. If the power is going to be off for a longer period of
time, you need to take the proper steps to protect your contents.
^ Vacation Time
During long absences, remove ail the bottles; unplug your wine cooler,
clean your wine cooler, and leave the door open slightly to avoid possible
formation of condensation, mold, or odors.
^ Moving Your Wine Cooler
• Remove all the bottles.
• Securely tape down all loose items inside your wine cooler.
• Turn the leveling, screws up to the base to avoid damage.
• Tape the doors shut.
• Be sure the wine cooler stays in the upright position during transportation.
PROBLEMS WITH YOUR WINE COOLER?
SERVICE FOR YOUR WINE COOLER
You can solv í many common wine cooler problems easily, saving you the cost
of a possible service call. Try the suggestions below see if you can solve the
problem befofe calling the servicer.
TROUBLESHOOTING GUIDE
ROBLEM
Wine cooler
Wine cooler is
Compressor
frequently.
F
loes not operate. Not plugged in.
not cold enough.
turns on and off
The circuit breaker tripped or blown fuse,
The wine cooler temperature control is set
at ‘'OFF".
Check to be sure the temperature control set
ting is at "NORMAL".
External environment may require a higher
setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The wine cooler does not have the correct
clearances.
Condenser coils at the back of the unit are
dirty.
The room temperature is hotter than normal.
A large amount of contents has been added to
the wine cooler.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The wine cooler does not have the correct
POSSIBLE CAUSE
clearances.
Vibrations,
The wine coc
much noise.
ler seems to make too
Check to assure that the wine cooler is level.
The rattling noise may come from the flow of
the refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
wine cooler.
Contraction and expansion of the inside walls
may cause popping and crackling noises.
The wine cooler is not level.
We are proud of our customer service organization and the network of profes
sional service technicians that provide service on your Avanti appliances. With
the purchase of your Avanti appliance, you can have the confidence that if you
ever need additional information or assistance, the Avanti Products Customer
Sen/ice team will be here for you. Just call us toll - free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
800-323-5029
Part Orders
800-220-5570
in - Home Repair Service
800-220-5570
YOUR Avanti Products
WARRANTY
Whatever your questions are about
our products, help is available.
You may order parts and accessories
that will be delivered directly to your
home.
You may order these items by per
sonal check, money order, Master
Card, or Visa.
An Avanti Products authorized service
center will provide expert repair ser
vice, scheduled at a time that is con
venient for you. Our trained servicers
know your appliance inside and out.
Staple your sales receipt or cancelled
check here. Proof of original purchase
date is needed to obtain service under
warranty.
The door will
not close properly.
The wine cooler is not level.
The doors were reversed and not properly in
stalled.
The gasket is dirty.
The shelves, bins, or baskets are out of position.
WHAT IS C0\ ERED
LIMITED ONE
-YEAR
WARRANTY
For one year
chase by the
Products will,
replace any
which proves
terial or workrii
use. During thi
ucts will provi
necessary to
free of charge,
ance has been
in accordance
structions in
commercial us^
is 90 days.
original owner, Avanti
to
cle
installed and operated
,s manual. In rental or
thi
from the date of pur-
at its option, repair or
part of the appliance
be defective in ma-
anship under normal
5 period Avanti Prod-
all parts and labor
correct such defects
so long as the appli-
with the written in-
the warranty period
WHAT IS NOT COVERED
WC260YGW/B PARTS BREAKDOWN
LIMITED SECOND THROUGH
FIFTH YEAR WARRANTY
For the second through fifth year from
date of original purchase, Avanti Prod
ucts will provide a replacement com
pressor free of charge due to a fail
ure. You are responsible for the ser
vice labor and freight charges. In
rental or commercial use, the limited
compressor warranty is one year and
nine months. Cost to move the appli
ance to the servicers' shop and back
to the user's home, as may be required,
are the user's responsibility.
► Content lossp
to spoilage.
► Incidental or
► Parts and
ing will not
ranty:
► Evaporator
or frames.
►Inner door pa
rails, and/or cl
► Chest freezer
► Vegetable cr
► Light bulbs
► Plastic cabin^
'•Punctured e
warranty on
system.
IS of food or other, due
(Consequential damages,
or costs for the follow-
lab
3e considered as war-
d 3ors, door springs, and/
riels, door shelves, door
oor supports,
lid liners,
spers.
and/or plastic housing.
3t liners.
vaporator that voids the
the complete sealed
• Repairs performed by unauthorized
servicers.
• Service calls that do not involve de
fects in material or workmanship
such as customer education, door
reversal, or proper installation.
• Service calls that are related to ex
ternal problems, such as abuse,
misuse, inadequate electrical power,
accidents, fire, floods, or acts of God.
• Replacement of house fuses or re
setting circuit breakers.
• Failure of the product if it is used for
other than its intended purpose.
• This warranty does not apply in any
foreign country.
10
11
ITEM*
......
10
_ _.._1.6 ..
21
31
5A
5B
11
12
13
14
15
17
18
19
20
22
23
24
25
26
27
28
29
30
32
33
34
35
36
37
38
39
WC260YGW/B PARTS LIST
PART NUMBER
1
2
3
4
6
7
8
9
B107.7-5
GB845 - 85
B107.7.1 -1
B107.7-1
BIOS. 0-4
BIOS. 0-5
B106
B105.0-1
GJB122.2 -86
B105. 1 -2 Tod Hinge
B107.2
B107.3 Recessed Bracket
B107.4
GJB122.7 -86 Tapping Screw
B107.5
B107. 0-1 Thermostat Knob
B107.6. 1 -2
B101.3.3 Thermostat
GJB122.2-86 Tapping Screw
GJB122.2-86
B105.4.2-1
B102.5.1 -1 Ground Leg
B102.1
B102.8.2-2 Wiring Junction Box
GJB122.1 -86 Machine Screw
B102.6. 1 -2 Compressor Bracket
B102.0 - 8 Rubber Cord
B102.12 Clamp Power Supply Cord
B101.2
B102.2-1
B102.2-2
B102.2-3
8101.2-4
B107. 0-2
BIOS. B. 0. 1 Master Carton
BIOS. B. 0. 1 Top Bottom Styrofoam
BIOS. B.9.2 Plastic Bag
B107.10 Instruction Manual
B107.11
B107.12 ID Label
DESCRIPTION
Handle
Tapping screw
Door Gasket
Glass Door
Button
Button
Evaporator Drain Pan
Hinge Cap
Tapping Screw
Sheif
Recessed Bracket
Fixed Clamp
Adjustable Leveling Lea
Tapping Screw
Bottom Hinge
Power Supply Cord
Compressor
. Clip Relay Cover
Relay Cover
PTC Starter
Overload Protector
Bracket
UPC Label
WC260YGW/B WIRING DIAGRAM
Printed in China
12
13
Loading...