Avanti WBC16Z1BIS User Manual

INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
Model Number / No. de Modelo / Modéle:
MANUEL D’INSTRUCTIONS
Enfriador de Vinos / Bebidas
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.
Avanti Products LLC
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
2
TABLE OF CONTENTS
Appliance Safety
3
Important Safeguides
4
Help us Help You
5
Parts and Features
6
Important Safety Instructions
7
Installation Instructions
7
Electrical Connection / Extension Cord
8
Operating Your Appliance
9
Care and Maintenance
10
Troubleshooting Guide
11
Service for Your Appliance
12
Wiring Diagram
12
Your Avanti Products Warranty
13
Instrucciones en Español
14 – 21
Instructions en Français
22 - 32
Page
Registration Form Last
3
APPLIANCE SAFETY
DANGER - Risk of fire or explosion. Flammable refrigerant used.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words “DANGER”, “WARNING” or “CAUTION”.
Danger means that failure to heed this
safety statement may result in severe personal injury or death.
Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.
Caution means that failure to heed this
safety statement may result in minor or moderate personal injury, or property or equipment damage.
All safety messages will alert you do what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.
PROP. 65 WARNING FOR CALIFORNIA RESIDENTS
WARNING:
Cancer And Reproductive Harm www.p65warnings.ca.gov
REFRIGERANT GAS WARNINGS / AVERTISSEMENTS GAZ REFRIGERANT
DO NOT use mechanical devices to defrost wine chiller. DO NOT puncture refrigerant tubing. DANGER - Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel. DO NOT puncture refrigerant tubing. CAUTION - Risk of fire or explosion. Flammable refrigerant u sed. Consult repair manual / owner’s guide before attempting to service this product. All safety precautions must be followed. CAUTION - Risk of fire or explosion. Dispose of property in acc ordance with federal or local regulations. Flammable refrigerant used. CAUTION - Risk of fire or explosion due to puncture of refrigerant tubing; Follow handling instructions carefully. Flammable refrigerant used.
CAUTION-To Prevent A Child From Being Entrapped, Keep Out Of Reach Of Children And Not In The Vicinity Of Wine Chiller.
CAUTION-Risk of Fire
4
IMPORTANT SAFEGUARDS
Before the appliance is used, it must be properly positioned and installed as
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do
in this material. All other servicing should be referred to a qualified technician.
• Use two or more people to move and install the appliance. Failure to do so can result in back or
• Do not use this apparatus for other than its intended purpose.
described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precautions, including the following:
·
not use an extension cord
• Remove all films be fore o per ati ng
• It is recommended that a separate circuit, serving only your appliance, be provided. Use receptacles that cannot be turned off by a switch or pull chain
• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
• Do not connect or disconnect the electric plug when your hands are wet
• Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended
other injury.
• To ensure proper ventilation for your appliance, the unit must be completely unobstructed. Choose a
0
well-ventilated area with temperatures above 55
F (130C) and below 900F (32 0C). This unit must
be installed in an area protected from the elements, such as wind, rain, water spray or sunlight.
• The appliance should not be located next to ovens, grills or other sources of high heat.
• The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.
• Do not kink or pinch the power supply cord of the appliance.
• The fuse (or circuit breaker) size should be 15 amperes.
• It is important for the appliance to be leveled in order to work properly. You may need to make several adjustments to level it.
• All installation must be in accordance with local plumbing code requirements.
• Make certain that the pipes are not pinched or kinked or damaged during installation.
• Check for leaks after connection.
• Never allow children to operate, play with or crawl inside the appliance
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage
or discolor the interior.
5
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain your new unit properly.
Keep it handy to answer your questions. If you don't understand something or you need more assistance, please call:
Avanti Customer Service 800-220-5570
Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.
CAUTION: THESE UNITS ARE NOT
DESIGNED FOR THE STORAGE OF MEDICINE OR OTHER MEDICAL PRODUCTS.
Write down the model and serial numbers.
You'll find them on a plate located on the rear outside wall of unit.
Please write these numbers here:
_
Date of Purchase
_
Model Number
_
Serial Number Use these numbers in any correspondence or
service calls concerning your unit.
If you received a damaged unit, immediately contact the dealer (or builder) that sold you the unit.
Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.
IF YOU NEED SERVICE
We're proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further assistance. FIRST, contact the people who serviced your unit. Explain why you are not pleased. In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to:
Customer Service Avanti Products 10880 NW 30 Street Miami, FL 33172 USA
6
PARTS & FEATURES
1
Upper Hinge
2
Control Panel – Front of Door
3
Door
4
Lower Hinge
5
Leveling Leg
6
Shelves
12 Bottle Loading
15 Bottle Loading
Beverage Cooler Loading
7
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, these basic precautions:
• Read all instructions before using the appliance.
-Save these instructions-
1
Instruction Manual
~WARNING~
or injury when using your appliance, follow
• DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.
• Before you throw away your old appliance: Take off the door. Leave the shelves
in place so that children may not easily climb inside.
• Never allow children to operate, play with, or crawl inside the appliance.
• Never clean appliance parts with flammable fluids. The fumes can create a fire
hazard or explosion.
• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or explosion.
INSTALLATION INSTRUCTIONS
Ø BEFORE USING YOUR APPLIANCE
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
1 Wire Wine Bottle Shelf 1 Wire Shelf (Full Shelf) 1 Wire Shelf (Half Shelf) 1 Bottle Stacking Assembly
• Before connecting this appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Ø INSTALLATION OF YOUR APPLIANCE
• THIS APPLIANCE IS DESIGNED TO BE FOR FREE STANDING INSTALLATION ONLY.
• ALLOW 4” INCHES OF SPACE BETWEEN THE TOP AND SIDES OF THE UNIT AND A
MINIMUM OF 4” INCHES AT THE REAR, WHICH ALLOWS THE PROPER AIR CIRCULATION TO COOL THE COMPRESSOR.
• Place your appliance on a floor that is strong enough to support it when it is fully loaded. To
level your appliance, adjust the front leveling legs at the bottom of the appliance.
• Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.
• Avoid locating the unit in moist areas.
• Plug the appliance into an exclusive, properly installed-grounded wall outlet. Do not under
any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.
8
Ø ELECTRICAL CONNECTION
~
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.
This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.
Do not under any circ umstanc es cut or re move the thir d ground pr ong from t he power c ord su pplied. For personal safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have the wall outlet an d circuit c hecked by a qu alified electrician to mak e sure the outl et is prop erly gr ounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.
The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.
The appliance should alw a y s be plugged into its own individual e lectr ica l out let w hic h has a vol tag e r ati ng that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the po wer c ord. Always grip th e plu g fir mly and pull str aig ht out from the r eceptac le. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.
Ø EXTENSION CORD Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
Ø SURGE PROTECTOR Most electrical appliances use a series of electric control boards to operate. These boards are very susceptible to power surges and could be damaged or destroyed.
If the appliance is going to be used in an area or if your city / country is prone to power surges / outages; it is suggested that you use a power surge protector for all electrical devices / appliances you use. The surge protector that you select must have a surge block high enough to protect the appliance it is connected to. If you have any questions regarding the type and size of surge protector needed contact a licensed electrician in your area.
Damages due to power surges are not considered a manufacturer covered defect and will void your product warranty.
Warning~
9
OPERATING YOUR APPLIANCE
Temperature Range
37º - 65º F
3º - 18º C
Red Wines
58 - 65 ºF
15 - 18 ºC
Dry / White Wines
48 - 57 ºF
10 - 14 ºC
Rose Wines
49 - 51 ºF
9 – 11 ºC
Sparkling Wines
40 - 47 ºF
5 - 8 ºC
Wine & Beverage Chiller Control Panel
It is recommended you install the appliance in a place where the ambient temperature is between 72- 78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures, performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The average temperature range of 37-65 degrees Fahrenheit may
not be reached.
the
Recommended Temperatures for Chilling Wine.
ON/OFF POWER
- Press and hold for 3 seconds on control panel to turn on or turn off the cooler, when cooler is turned off, the appliance will stop work in g.
Ø CONTROL PANEL LOCK
Your appliance is equip ped with a contro l panel lock feature wh ich will lock itself a utomatica lly 12 seconds after the last time a button is pressed. Press the POWER button for approximat ely 3 sec ond s to unlock the c ontro l pan el. Y ou wi ll h ear a “ BEEP” sound to alert you that the control is now active.
Ø TEMPERATURE DISPLAY ( ºF / ºC )
With the control p anel unloc ked and active, si mply press and hold the POWE R and SETTING b uttons for approximately 2 sec onds, the ºC or ºF indicator light will turn on and the t emperature sett ing in the di gital display will change.
Ø SETTING THE TEMPERATURE CONTROL
With the control panel unlocked and active, simply press the SETTING button, the temperature will increase in increments of 1ºF / 1ºC with e ach pres s. To s croll rapid ly throu gh the t emperatur e settings sim ply press and hold the SETTING button and the temperature selections will change quicker.
The control panel is equipped with a “Memory Setting”, if the unit accidentally powered off, the unit will return to the original setting when the power is turned back on.
10
CARE AND MAINTENANCE
Ø CLEANING YOUR APPLIANCE
• Turn off the power, unplug the appliance, and remove all items including shelves.
• Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
• Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless
steel with steel particles and rusting may occur.
Ø POWER FAILURE
• Most power failures are corrected within a few hours and should not affect the temperature of
your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.
Ø MOVING YOUR APPLIANCE
• Remove all items.
• Securely tape down all loose items (shelves) inside your appliance.
• Tape the door shut.
• Be sure the appliance stays secure in the upright position during transportation. Also protect
outside of appliance with a blanket, or similar item.
Ø ENERGY SAVING TIPS
• The appliance should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
Ø HIGH AND LOW TEMPERATURE PROTECTION SYSTEMS
• This appliance is equ ipp ed with a HIG H a n d LOW temperature protec t io n s ystem:
HIGH Temper at ure: Display Code: HH After the f irs t h our of use, if t he s ys t em d etects temp er a tures above 7 8 ºF c ontinuously f or approximate ly 2 0 minut es, the sys te m wil l activ at e the pr otec tion sys tem , disp lay HH in the d isp lay window and a buz zing noise w i l l be h eard for 20 m i n utes. The system will r u n t he c o mpressor for 5 minutes an d s hut off for 10 minutes t o s t ab i l ize the tempera ture. Once the syste m r et ur ns to normal temp er a ture (below 78ºF), the H H display and buz zer will turn off.
LOW Tempera t ur e: Display Code: LL After the f irs t h our of use, if the system d et ec ts te m p er a tures below 5 ºF continuous ly for approximate ly 2 0 mi n ut es , th e s y s t e m wi l l act ivate the pr o tection syst em , dis play LL in t he d isplay window and a buzz in g n oi se will be heard for 20 m i n ut es . T h e s ystem will s hutdown the compressor un til the in teri or te mper atur e re ach es a min imu m of 36º F, o nce the mi nim um temperature h as be en re ac hed th e LL dis play and b uzzer wil l turn off.
11
PROBLEMS WITH YOUR APPLIANCE?
PROBLEM
POSSIBLE CAUSE
Appliance does not operate.
Not plugged in. The circuit breaker tripped or a blown fuse.
Appliance is not cold enough.
Check the temperature control setting.
The door gasket does not seal properly.
Turns on and off frequently.
The room temperature is hotter than normal.
The door gasket does not seal properly.
Vibrations.
Check to assure that the appliance is level.
The appliance seems to make too much noise.
The rattling noise may come from the flow of the
The appliance is not level.
The door will not close properly.
The appliance is not level.
Display flashes Error message “HH”
1 - 800 – 220 - 5570
Display flashes Error message “LL”
Display flashes Error message “E9”
You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
The appliance is turned off.
External environment may require a higher setting. The door is opened too often. The door is not closed completely.
A large amount of contents has been added to the unit.
The door is opened too often. The door is not closed completely. The temperature control is not set correctly.
refrigerant, which is normal. As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your appliance. Contraction and expansion of the inside walls may cause popping and crackling noises.
The gasket is dirty. The shelves are out of position.
High Temperature Protection Sensor Short Circuit See Page 10 for description Contact the Avanti Service Department
Low Temperature Protection – Open Circuit See Page 10 for description Contact the Avanti Service Department 1 - 800 – 220 – 5570
Communication Failure to Power and Control PCB Boards Contact the Avanti Service Department 1 - 800 – 220 - 5570
Loading...
+ 25 hidden pages