BEFORE USE. PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves the right to change
materials and specifications without notice.
Avanti Products
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
Warranty Information
Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100
days of purchase and receive these
important benefits:
Confirm your warranty;
Your prompt product registration confirms your right to the protection available under the terms and
conditions of your Avanti warranty.
Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to
help you refer to this information in the event of an insurance claim such as fire or theft.
Promote better products:
We value your input. Your responses will help us develop products designed to best meet
your future needs.
— ---------------
-----------
Avanti Registration Card
Name
Address
City
Area Code
State
Phone Number
Zip
Did You Purchase An Additional Warranty;
~ Extended T None
Reason For Choosing This Avanti Product:
Please indicate the most important factors
that influenced your decision to purchase
this product.
Z Price
Z Product Features
T Avanti Reputation
Z Product Quality
Z Salesperson Recommendation
Z Friend/Relative Recommendation
Z under 18 Z 18-25 Z 26-30
Z 31-35 Z 36-50 Z over 50
Marital Status:
Married Z Single
Is This Product Used in The:
Home Z Business
How Did You Learn About This Product:
■ Advertising Z Product Features
In Store Demo Z Personal Demo
Other _________________________________
Comments
...........................
Serial #
Store/Dealer Name
________________________________
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain your new
appliance properly.
Keep it handy to answer your questions.
If you don't understand something or your need more
help, please call:
Avanti Customer Service
800-220-5570
Keep proof of original purchase date (such as your
sales slip) with this guide to establish the warranty
period.
Write down the model and serial numbers.
You'll find them on a plate located on the back wail of
the appliance.
Please write these numbers here:
Date of Purchase
Model Number
Serial Number
Use these numbers in any correspondence or service
calls concerning your appliance.
If you received a damaged appliance, Immediately
contact the dealer (or builder) that sold you the
appliance.
IF YOU NEED SERVICE
We're proud of our service and want you to be pleased.
If for some reason you are not happy with the service
you receive, here are some steps to follow for further
help.
FIRST, contact the people who serviced your appliance.
Explain why you are not pleased. In most cases, this will
solve the problem.
Save time and money. Before you call for service,
check the Troubleshooting Guide. It lists causes of
minor operating problems that you can correct yourself
NEXT, if you are still not pleased, write all the details,
including your telephone number, and send to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172
FILTER
Lini will be collected in
the filter during
washing.
FABRIC SOFTENER
DISPENSER
BLEACH INLET
PULSATOR
Be sure to keep the lid
LID
closed during washing
^ and spinning.
WATER SUPPLY HOSE(HOT)
WATER SUPPLY HOSE (COLD)
WATER DRAIN HOSE
DETERGENT BOX
SPIN BASKET
POWER CORD
5
3)
H
</>
>
a
m
5!
C
1}
m
CO
FRONT CONTROL
PANEL
ADJUSTABLE LEGS
Adjust the length
of the legs when
installing the washer.
SOUND ABSORPTION
PANEL
TABLE OF CONTENTS
Warranty Information and Registration Card
Help Us Help You
Parts and Features
Important Safety Instructions
Installation Instructions
Before Using Your Appliance
Installation of Your Appliance
Water Connections
Electrical Connection
Care and Maintenance
Control Panel
Washing Procedure
Troubleshooting Guide
Service For Your Appliance
Your Avanti Products Warranty
.................................
2
3
4
6-7
8
8
9
10
11
11
12
13-15
16
16
17
Parts Breakdown and Parts List ..........................
Wiring Diagram
Spanish Section
18
22
23-31
Important Safety Instructions
To reduce the risk of fire, electrical shock, or injury when
using your appliance, follow these basic precautions:
Read all instructions before using the appliance.
Do not wash articles that have been previously cleaned in. washed in, soaked in, or
spotted with gasoline, dry-cleaning solvents, other flammable, or explosive substances
as they give off vapors that could ignite or explode.
Under certain conditions, hydrogen gas may be produced in a hot water system that has
not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using a washing machine, turn on all
hot water faucets and let the water flow from each for several minutes. This will
release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an
open flame during this time.
Before the appliance is removed from service or discarded, remove the door.
Do not tamper with controls.
Do not repair or replace any part of the appliance or attempt any servicing unless
specifically recommended in the user-maintenance instructions or in published userrepair instruction.
DANGER or WARNING : Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous... even if they will “just sit in the garage a few days."-
Before you throw away your old appliance: Take off the door so that children may not
easily climb inside.
Never allow children to operate, play with, or craw! inside the appliance.
Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or
explosion.
Do not place the washer in steamy rooms or where the washer is directly exposed to rain.
Moisture may destroy the electrical insulation causing an electrical shock hazard.
During spinning, don't put your hand in the spin basket: Because the spin basket is rotating at
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this
or any other appliance. The fumes can create a fire hazard or explosion.
Turn off water taps when the washer is not in use to avoid water pressure damage to the
pump.
To minimize the possibility of electric shock, unplug this appliance from the power supply
or disconnect the washer at the household distribution panel by removing the fuse or
switching off the circuit breaker before attempting any maintenance or cleaning.
The appliance is not intended for use by young children or infirm persons without supervision.
If the power supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similary qualified person in order to avoid a hazard.
Place clothes evenly into the washer as unevenly distributed laundry may cause excessive out of balance
noise and vibration.
Do not operate this appliance if it is damaged, malfunctioning, partially disassembled,
or has missing or broken parts, including a damaged cord or plug.
-Save these instructions-
^ WARNING ^
(3)
INSTALLATION INSTRUCTIONS
Before Using Your Appliance
Remove the exterior and interior packing.
Check to be sure you have all of the following parts;
• Hot Water Supply Hose
• Cold Water Supply Hose
• Drain Hose (Pump)
• Instruction Manual
• Absorbing Panel & Screw
• Male and Female Hose Thread Adapters
• Support Legs
Clean the interior surface with lukewarm water using a soft cloth.
Place your washer on a floor that is strong enough to support the appliance when it is fully
loaded.
To level your washer, adjust the legs at the front of the appliance.
Allow 5 inches of space between the back and sides of the appliance.
Carpeting must not obstruct ventilation openings when the washing machine is installed on
a carpeted floor.
Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating, plastic and electrical components.
Put your laundry into the washer evenly. Uneven laundry may cause noise or vibration.
Don’t use excessively hot water 50°C(122'F) or more. Plastic parts may be deformed or damaged.
Also, clothing may be deformed or bleached.
Before washing, check all pockets. If nails or pins remain in pockets, they may damage the
washer or clothes.
Never splash water on the control panel.
Plug the washer into an exclusive properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and or grounding should be directed toward a certified electrician or an
Lay down the washer with the rear side facing up and insert the panel until it clicks into the five slots provided (as
shown in the figure). Use the screw in the hole provided to tighten the absorbing panel to the bottom of the washer.
Screw
Leveling
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING THE POSITION OF THE WASHING TUB.
• Open the lid of the machine, pour water into the tub up to the level just below the pulsator, and adjust the
legs so that the pulsator is positioned at the center of the water as shown in the figure below.
• Place the machine more than 10cm away from the wall.
WATER
Adjust the front legs for levelling.
Loosen M. Lock
Note : The protective rubber support inserts may leave marks on certain floor types. | j
To prevent possible markings place a small piece of cloth, or similar item, L
under the rear legs when the machine is in use. /.
Connecting The Drain Hose
•Take out the cap-hose and connect the outlet hose.
cap-hose
- M
outlet-hose
•Be sure to join tightly the drain hose outlet
on the back of the machine.
•Install the drain hose 28-32 inches above the ground.
o Support Leg
K'
CAUTION : Drain hose may pop up during draining due to heavy water pressure. This is normal.
We suggest to hold it down with a heavy water proof object, to keep hose in place.
Cleaning the Magic Filter
1. Push the upper part 2. Open the cover as
of the filter and pull in. shown in the figure.
3. Clean the filter.
4. Close the cover and insert the lower
part of the filter in the basket first and then
push the filter until your hear a "click" sound
Water Connection
For normal kitchen-sink tap only use the inlet hose with cold water inlet.
Connect the inlet hose to the male hose thread adapter by turning it clockwise to be fixed tightly.
Make sure to insert the rubber ring enclosed. Then connect tightly to your sink.
Note: Some faucets may require you to also use the female hose thread adapter between the male
adapter and your sink as shown below. Make sure the rubber ring is inserted and connect to
your sink.
Only necessary on some faucets.
Male Adapter
Rubber Ring
Inlet hose
Connecting The Water Supply Hoses
1. Your washer is provided with dual water inlets {hot & cold)
Connect the water supply hose to the water tap.
Fasten it tightly.
2. Next, connect the other end of the water supply hose
to the inlet valve at the back of the washer.
Screw the hose clockwise all the way in.
3. When using as a portable washer connect hose to
the cold side of the water valve.
Female Hose Thread Adapter
Rubber Ring
Male Adapter
Rubber Ring
Inlet hose
Note:
Be sure to connect the hot inlet hose to hot water tap and hot water valve. For best operating
conditions your hot water should be approximately 50®C {122*F) otherwise water above this
tempeialuie will cause damage to the machine.____________________________________________
Turn on the water completely to check for any leakage.
If any, turn off the water and try again above procedures.
For special tap, use connectors provided or call a qualified plumber for the installation.
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.