Avanti VF54Q0W, VF93Q0W Instruction Manual

VF54Q0W

VF93Q0W

UPRIGHT FREEZER / CONGELADOR VERTICAL / CONGELATEUR VERTICAL

INSTRUCTION MANUAL/MANUAL DE INSTRUCCIONES / MANUEL D’INSTRUCTIONS

Models / Modelos / Modelés:

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.

Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.

Avanti Products LLC

P.O. Box 520604 - Miami, Florida 33152

www.avantiproducts.com

TABLE OF CONTENTS

Freezer Safety

Important Safe Guides

Help Us Help You

Parts and Features

Important Safety Instructions

Electrical Connection

Installation Instructions

Before Using Your Freezer

Installation of Your Freezer

Operating Your Freezer

Temperature Control

Defrosting Your Freezer

The Freezer Compartment

Care and Maintenance

Cleaning Your Freezer

Vacation Time

Moving Your Freezer

Energy Saving Tips

Troubleshooting Guide

Service for Your Freezer

Wiring Diagram

Your Avanti Products Warranty

Instrucciones en Español

14 – 18

Instructions en Français

15 - 29

Warranty Information and Registration Card

Last

Page

FREEZER SAFETY

DANGER - Risk of fire or explosion. Flammable refrigerant used. DO NOT use mechanical devices to defrost refrigerator. DO NOT puncture refrigerant tubing.

DANGER - Risque d’incendie ou d’explosion. Réfrigérant inflammable utilisé. Ne pas utiliser de dispositifs mécaniques pour réfrigérateur à dégivrage. Ne pas percer la tuyauterie du refrigerant.

DANGER - Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel. DO NOT puncture refrigerant tubing.

DANGER - Risque d’incendie ou d’explsion. Réfrigérant inflammable utilisé. Pour être réparé que par du peronnel qualifié.Ne pas percer la tuyauterie du refrigerant.

CAUTION - Risk of fire or explosion. Flammable refrigerant used. Consult repair manual / owner’s guide before attempting to service this product. All safety precautions must be followed.

AVERTISSEMENT - Risque d’incendie ou d’explosion. Réfrigérant inflammable utilisé. Consultez réparation manuelle / propriétaire, guide avant d’ essayer de réparer ce produit. Toutes les précautions doivent être suivies.

CAUTION - Risk of fire or explosion. Dispose of property in accordance with federal or local regulations. Flammable refrigerant used.

AVERTISSEMENT - Risque d’incendie ou d’explosion. Aliéner des biens conformément à la réglementation fedérale ou locale. Réfrigérant inflammable utilisé.

CAUTION - Risk of fire or explosion due to puncture of refrigerant tubing; Follow handling instructions carefully. Flammable refrigerant used.

AVERTISSEMENT - Risque d’incendie ou d’explosion dus à la perforation des tuyaux de fluide réfrigérant, suivez attentivement les instructions remise. Réfrigérant inflammable utilize.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual for your appliance. Always read and obey all safety messages.

This is the Safety Alert Symbol. This symbol alerts you to potential hazards that

can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words” DANGER”, “WARNING” or “CAUTION”.

Danger means that failure to heed this safety statement may result in severe personal injury or death.

Warning means that failure to heed this

safety statement may result in extensive product damage, serious personal injury, or death.

Caution means that failure to heed this

safety statement may result in minor or moderate personal injury, property or equipment damage.

All safety messages will alert to know what potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

REFRIGERANT GAS WARNINGS

IMPORTANT SAFEGUIDES

Before the freezer is used, it must be properly positioned and installed as

described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the freezer, follow basic precaution, including the following:

 Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do

not use an extension cord.

 Replace all panels before operating.  It is recommended that a separate circuit, serving only your freezer be provided. Use receptacles

that cannot be turned off by a switch or pull chain.

 Never clean freezer parts with flammable fluids. These fumes can create a fire hazard or explosion.

And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

 Before proceeding with cleaning and maintenance operations, make sure the power line of the unit

is disconnected.

 Do not connect or disconnect the electric plug when your hands are wet.  Unplug the freezer or disconnect power before cleaning or servicing. Failure to do so can result in

electrical shock or death.

 Do not attempt to repair or replace any part of your freezer unless it is specifically recommended in

this manual. All other servicing should be referred to a qualified technician.

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

 Use two or more people to move and install freezer. Failure to do so can result in back or other

injury.

 To ensure proper ventilation for your freezer, the front of the unit must be completely unobstructed.

Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain, water spray or drips.

 The freezer should not be located next to ovens, grills or other sources of high heat.  The freezer must be installed with all electrical, water and drain connections in accordance with

state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.

 Do not kink or pinch the power supply cord of freezer.  The fuse (or circuit breaker) size should be 15 amperes.  It is important for the freezer to be leveled in order to work properly. You may need to make several

adjustments to level it.

 All installation must be in accordance with local plumbing code requirements.  Make certain that the pipes are not pinched or kinked or damaged during installations.  Check for leaks after connection.  Never allow children to operate, play with or crawl inside the freezer.  Although the unit has been tested at the factory, due to long-term transit and storage, the first batch

of cubes must be discarded.

 Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may

damage or discolor the interior.

 Do not use this apparatus for other than its intended purpose.

CAUTION:

THIS FREEZER IS NOT DESIGNED FOR THE STORAGE OF MEDICINE OR OTHER MEDICAL PRODUCTS.

HELP US HELP YOU...

Read this guide carefully.

It is intended to help you operate and maintain your new freezer properly.

Keep it handy to answer your questions. If you don't understand something or you need more help, please call:

Avanti Customer Service 800-220-5570

Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.

IF YOU NEED SERVICE

We're proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further help. FIRST, contact the people who serviced your freezer. Explain why you are not pleased. In most cases, this will solve the problem.

Write down the model and serial numbers.

You'll find them on a plate located on the rear wall of the freezer.

Please write these numbers here:

____________________________________ Date of Purchase

____________________________________ Model Number

____________________________________ Serial Number

Use these numbers in any correspondence or service calls concerning your freezer.

If you received a damaged freezer, immediately contact the dealer (or builder) that sold you the freezer.

Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.

NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to:

Customer Service

Avanti Products 10880 NW 30th Street Miami, FL 33172

PARTS AND FEATURES

Model: VF54Q0W

Model: VF93Q0W

WARNING

To reduce the risk of fire, electrical shock, or injury when using your freezer follow these basic precautions:

 Read all instructions before using the freezer.  DANGER or WARNING: Risk of child entrapment.  Child entrapment and suffocation are not problems of the past. Junked or abandoned

freezer are still dangerous. . . even if they will “just sit in the garage a few days.”

 Before you throw away your old refrigerator or freezer: Take off the doors. Leave

the shelves in place so that children may not easily climb inside.

 Never allow children to operate, play with, or crawl inside the freezer.  Never clean freezer parts with flammable fluids. The fumes can create a fire hazard or

explosion.

 Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of

this or any other freezer. The fumes can create a fire hazard or explosion.

-Save these instructions-

1． Temperature Control

2. Freezer compartment

3. Leveling Leg

Important Safety Instructions

 ELECTRICAL CONNECTION

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.

This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded.

This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.

The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.

 EXTENSION CORD Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

 SURGE PROTECTOR Most electrical appliances use a series of electric control boards to operate. These boards are very susceptible to power surges and could be damaged or destroyed.

If the appliance is going to be used in an area or if your city / country is prone to power surges / outages; it is suggested that you use a power surge protector for all electrical devices / appliances you use. The surge protector that you select must have a surge block high enough to protect the appliance it is connected to. If you have any questions regarding the type and size of surge protector needed contact a licensed electrician in your area.

Damages due to power surges are not considered a manufacturer covered defect and will void your product warranty.

INSTALLATION INSTRUCTIONS

Instruction Manual

1 Plastic Spatula

Handle Assembly (Model VF93Q0W ONLY)

Handle Installation – Model VF93Q0W - ONLY

Remove handle from the bag.

Align the handle to the door.

Secure the handle to the door using the two (2)

Philips head screws included.

DO NOT OVERTIGHTEN the screws.

Cover the screws using the decorative covers

Included.

 Before Using Your Appliance

 Remove the exterior and interior packing.  Check to be sure you have all of the following parts:

 Before connecting the appliance to the power source, let it stand upright for approximately 2

hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

 Clean the interior surface with lukewarm water using a soft cloth.

 Installation of Your Freezer

 Place your freezer on a floor that is strong enough to support the freezer when it is fully loaded.

To level your freezer, adjust the legs at the front of the freezer.

 Allow 5 inches of space between the back and sides of the freezer, which allows the

proper air circulation to cool the compressor.

 Locate the freezer away from direct sunlight and sources of heat (stove, heater, radiator, etc.).

Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the freezer not to perform properly.

 Avoid locating the freezer in moist areas. Too much moisture in the air will cause frost to form

quickly on the evaporator requiring more frequent defrosting of the freezer.

 Plug the freezer into an exclusive properly installed-grounded wall outlet. Do not under any

circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

DO NOT INSTALL THE UNIT IN A LOCATION WHERE THE AMBIENT TEMPERATURE WILL DROP BELOW 32 ºF OR RISE ABOVE 110 ºF. AMBIENT TEMPERATURES OUTSIDE OF THIS RANGE WILL AFFECT THE PERFORMANCE OF YOUR UNIT AND WILL NOT ALLOW TO MAINTAIN THE PROPER TEMPERATURES.

OPERATING YOUR FREEZER

Model VF54Q0W

Model VF93Q0W

 Temperature Control

 The first time you turn the unit on using a coin or a flat head screwdriver set the temperature control

to the maximum setting or the “7” position.

 The range of the temperature control is from position "1" the warmest to “7” the coldest. Model

VF93Q0W also has a “0” position which will turn off the freezing process but will not turn off the power to the unit. After 24 to 48 hours, using the thermostat key provided adjust the temperature control to the setting that best suites your needs. The setting of “4” should be correct for home or office freezer use.

NOTE:

 If the unit is unplugged, power lost, or turned off; you must wait 3 to 5 minutes before restarting

the unit. If you attempt to restart before this time delay, the freezer will not start.

 Defrosting Your Freezer  When? For the most efficient operation and minimum energy consumption, defrost the freezer

compartment when the frost on the freezer walls is excessive or ¼ inch thick.

 How? To start defrosting, unplug the freezer, remove the food and baskets. After the frost or ice has

melted, discard the melted water and dry up the interior of refrigerator. Then the freezer can be restarted by a turning its thermostat to the desired setting.

CAUTION Do not use boiling water because it may damage the plastic parts. In addition, never use a sharp or metallic instrument to remove frost as it may damage the cooling coils and will void the warranty. We recommend using a plastic spatula (included).

 Use a sponge or towel to pick up the melting ice off the freezer floor.  Remove the frozen food from the freezer and place it in a cooler to protect the food.

 The Freezer Compartment

 This compartment is designed for the long term storage of frozen food.  The storage life of frozen foods varies and the recommended storage time should not be

exceeded. The instructions regarding the care of frozen foods should be followed when defrosting the freezer.

 Pre-packed commercially frozen food should be stored in accordance with the frozen foods

manufacturer’s instructions for a three star frozen food storage compartment or home freezer.

 Place frozen food into the freezer as quickly as possible after purchase. If there are instructions

on the packet, carefully follow these instructions regarding storage times.

 The freezer door is susceptible to breaking due to excessive ice build up. Be sure to defrost

when the ice reaches ¼ inch thick.

CARE AND MAINTENANCE

 Cleaning Your Freezer

 Unplug the freezer and remove the food.  Wash the inside with a warm water and baking soda solution. The solution should be about 2

tablespoons of baking soda to a quart of water.

 Wash the shelving with a mild detergent solution.  The outside of the freezer should be cleaned with mild detergent and warm water.

CAUTION Failure to unplug the freezer could result in electrical shock or personal injury.

 Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your freezer if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your food.

 Vacation Time

During long absences, remove all the food; unplug your freezer, clean your freezer, and leave the door open slightly to avoid possible formation of condensation, mold, or odors.

 Moving Your Freezer

 Remove all the food.  Securely tape down all loose items inside your freezer.  Turn the leveling screws up to the base to avoid damage.  Tape the door shut.  Be sure the freezer stays in the upright position during transportation.

 Energy Saving Tips

 The freezer should be located in the coolest area of the room, away from heat producing

appliances or heating ducts, and out of the direct sunlight.

 Let hot foods cool to room temperature before placing in the freezer. Overloading the freezer

forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.

 Be sure to wrap foods properly, and wipe containers dry before placing them in the freezer.

This cuts down on frost build-up inside the freezer.

 Freezer storage shelves should not be lined with aluminum foil, wax paper, or paper toweling.

Liners interfere with cold air circulation, making the freezer less efficient.

 Organize and label food to reduce door openings and extended searches. Remove as many

items as needed at one time, and close the door as soon as possible.

+ 22 hidden pages