Avanti EWC18DZ User Manual
INSTRUCTION MANUAL
MANUAL DE INSTRUCC I O NE S
Model Number / No. de Modelo:
THERMOELECTRIC WINE CHILLER
VINERA TERMOELECTRICA
EWC18DZ
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en español empieza en la página 12.
Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and
specifications without notice.
Avanti Products, A Division of The Mackle Co ., Inc.
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
TABLE OF CONTENTS
Help Us Help You 3
Parts and Features 4
Important Safety Instructions 5
Installation Instructions 5
Before Using Your Wine Chiller 5
Installation of Your Wine Chiller 5
Electrical Connection 6
Extension Cord 6
Operating Your Wine Chiller 7
Temperature Control 7
Storage Capacity 7
Interior Light 8
Care and Maintenance 8
Cleaning Your Wine Chiller 8
Power Failure 8
Vacation Time 8
Moving Your Wine Chiller 8
Energy Saving Tips 8
Troubleshooting Guide 9
Service for Your Appliance 9
Wiring Diagram 10
Your Avanti Products Warranty 11
Instrucciones en Español 12 – 14
Registration Information and Registration Card 15
2
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain
your new Wine Chiller properly.
Keep it handy to answer your questions.
If you don't understand something or you
need more assistance, please call:
Avanti Customer Service
800-220-5570
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
CAUTION:
THIS WINE CHILLER IS NOT
DESIGNED FOR THE STORAGE
OF MEDICINE OR OTHER
MEDICAL PRODUCTS.
IF YOU NEED SERVICE
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further assistance.
FIRST, contact the people who serviced your
Wine Chiller. Explain why you are not pleased.
In most cases, this will solve the problem.
Write down the model and serial numbers.
You'll find them on a plate located on the rear
outside wall of the Wine Chiller.
Please write these numbers here:
____________________________________
Date of Purchase
____________________________________
Model Number
____________________________________
Serial Number
Use these numbers in any correspondence or
service calls concerning your Wine Chiller.
If you received a damaged Wine Chiller,
immediately contact the dealer (or builder) that
sold you the Wine Chiller.
Save time and money. Before you call for
service, check the Troubleshooting Guide. It
lists causes of minor operating problems that
you can correct yourself.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send it to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172 USA
3
PARTS & FEATURES
1. LED Interior Light
2. Upper Zone Fan
3. Zone Separator
4. Shelves (4 total)
5. Bottom Zone Fan
6. Leveling Legs
7. Door Hinge Cover
8. Glass Door
9. Integrated Door Handle
4
IMPORTANT SAFETY INSTRUCTIONS
aWARNINGa
• Read all instructions before using the Wine Chiller.
• DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous . . . even if they will “just sit in the garage a few days”.
• Before you throw away your old Wine Chiller: Take off the door. Leave the
shelves in place so that children may not easily climb inside.
• Never allow children to operate, play with, or crawl inside the appliance.
• Never clean appliance parts with flammable fluids. The fumes can create a fire
hazard or explosion.
• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or explosion.
• Do not repair or replace any part of the refrigerator or attempt any servicing unless
specifically recommended in the user-maintenance instructions or in published userrepair instructions. Replace the fuse with the same type.
-Save these instructions-
INSTALLATION INSTRUCTIONS
¾ Before Using Your Wine Chiller
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
• 4 Shelves
• 1 Instruction Manual
• Clean the interior surface with lukewarm water using a soft cloth.
¾ Installation of Your Wine Chiller
• This Wine Chiller is designed to be free standing installation only, and should not be recessed or
built-in (Fully recessed).
• Place your Wine Chiller on a surface that is strong enough to support it when it is fully loaded.
• Allow 5 inches of space between the back and sides of the refrigerator, which allows the proper
air circulation to cool the heat sink.
• Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the unit not to perform
properly.
• This Wine Chiller uses thermoelectric refrigeration technology (no compressor) and is not
designed for storage in hot areas like garages, warehouses or outdoors since it is designed to
operate at a maximum of 30 degrees below the ambient temperature.
• Avoid locating the unit in moist areas.
• Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized Avanti Products service center.
• After plugging the Wine Chiller into a wall outlet, allow the unit to cool down for 2-3 hours before
placing any items in the compartment.
To reduce the risk of fire, electrical shock,
or injury when using your appliance, follow
these basic precautions:
5
Loading...