Avanti ER20P0WG, ER20P3SG, ER24P0WG, ER24P1BG, ER24P3SG Instruction Manual
ER20P3SG
ER24P1BG
Actual design / color may vary./Diseño / color real puede variar. / Design / Couleur peut varier
INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves the
right to change materials and specifications without notice.
Avanti Products LLC
www.avantiproducts.com
ELECTRIC RANGES
COCINAS ELECTRICAS
CUISINIÈRES ÉLECTRIQUES
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
Models / Modelos / Modelés:
ER20P0W
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
Models / Modelos / Modelés:
ER24P0WG
Model / Modelo / Modelé:
ER24P3SG
P.O. Box 520604
Miami, FL 33152
1
Help Us Help You …
3
Range Safety
4
Important Safeguides 5
The Anti-tip Bracket 6
Parts and Features 7
Important Safety Instructions
8 – 9
Installation Instructions 10
Before Using Your Electric Range
10
Important Precautions and Recommendations
11
Installation of Your Electric Range
12 – 13
Electrical Connection 14
Leveling the Range 15
Anti-tip Bracket Installation
15
Operating Your Electric Range
16
Control Panel
16
Using the Surface Unit 17
Cookware Tips
17
Using the Oven 18 – 19
Care and Maintenance 20
General Information
20
Cleaning Your Range 20
Cleaning Surface Units and Reflector Bowls
20
Lift-up Cooktop
21
Removable Storage Drawer
21
Replacing the Oven Light 21
Troubleshooting Guide 22
Service for Your Appliance
23
Wiring Diagram
23
Your Avanti Products Warranty
24
Instrucciones en Español
25 – 36
Instructions en Français
37 - 61
Registration Information and Registration Card
Last Page
TABLE OF CONTENTS
2
HELP US HELP YOU...
If you don't understand something or you
with this guide to establish
IF YOU NEED SERVICE
We're proud of our service and want you to
be pleased. If for some reason you are not
NEXT, if you are still not pleased, write all the details,
CAUTION:
Read this guide carefully.
It is intended to help you operate and
maintain your new appliance properly.
Keep it handy to answer your questions.
need more help, please call:
Avanti Customer Service
800-220-5570
Keep proof of origina l purchase date (such as
your sales slip)
the warranty period.
THIS APPLIANCE IS NOT
DESIGNED FOR THE STORAGE
OF MEDICINE OR OTHER
MEDICAL PRODUCTS.
Write down the model and serial numbers.
You'll find them on a plate located on the rear o utside
wall of the appliance.
Please write these numbers here:
_____________________________________
Date of Purchase
_____________________________________
Model Number
_____________________________________
Serial Number
Use these numbers in any correspondence or service
calls concerning your appliance.
If you received a damaged appliance, immediately
contact the dealer (or builder) that sold you the
appliance.
Save time and money. Before you call for service,
check the Troubleshooting Guide. It lists causes of
minor operating problems that you can correct yourself.
happy with the serv ice you receive, here are
some steps to follow for further assistance.
FIRST, contact the people who ser viced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
including your telephone number, and send it to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172 USA
3
RANGE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always
read and obey all safety messages.
This is the Safety Alert Symbol.
This symbol alerts you to potential hazards that can kill or injure you and others.
All safety messages will follow the Safety Alert Symbol and either the words
“DANGER”, “WARNING” or “CAUTION”. These words mean:
Danger means that failure to heed this
safety statement may result in severe
personal injury or death.
Warning means that failure to heed this
safety statement may result in extensive
product damage, serious personal injury, or
death.
All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of
injury, and let you know what can happen if the instructions are not followed.
Caution means that failure to heed this
safety statement may result in minor or
moderate personal injury, or property or
equipment damage.
4
IMPORTANT SAFEGUIDES
Before the appliance is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the appliance, follow basic precaution,
including the following:
•
It is recommended that a separate circuit, serving only your appliance be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
•
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance. The fumes can create a fire hazard or explosion.
•
Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
•
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result
in electrical shock or death.
•
Do not attempt to repair or replace any part of your applianc e unles s it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
•
This appliance shall not be used for space heating. The surface unit should not be operated
without cookware. This information is based on safety considerations.
•
All openings in the wall behind the appliance and in the floor under the appliance shall be sealed.
•
Keep appliance area clear and free from combustible materials, gasoline, and other flammable
vapors.
•
Do not obstruct the flow of ventilation air.
•
Disconnect the electrical supply to the appliance before servicing.
•
When removing appliance for cleaning and/or service:
•
Disconnect AC power supply.
•
Carefully remove the range by pulling outward.
CAUTION: Range is heavy. Use care in handling.
•
The misuse of oven door (e.g. stepping, sitting, or leaning on them) can result in potential hazards
and /or injuries.
•
When installing or removing the range for service, a rolling life jack should be used. Do not push
against any of the edges of the range in an attempt to slide it into or out of the installation.
Pushing or pulling a range (rather than using a lift jack) also increases the possibility of bending
the leg spindles or the internal coupling connectors.
•
It is important for the appliance to be leveled in order to work properly. You may need to make
several adjustments to level it.
•
Never allow children to operate, play with or crawl inside the appliance.
•
Electrical Grounding Instructions - The appliance must be installed and groun ded b y a qualified
technician in accordance with the National Electrical Code ANSI/NFPA No. 70 (Latest Edition)
and local electrical code requirements.
•
Replacement Parts – Only authorized replacement parts may be used in performing service on
the range. Replacement parts are available from factory authorized parts distributors. Contact the
nearest Avanti service center in your area.
•
Take care to prevent aluminum foil and meat probes from contacting the heating elements.
5
THE ANTI-TIP BRACKET
The range will not tip during normal use. However, the range can tip if you apply too much
force or weight to the open door without the anti-tip bracket fastened down properly.
To reduce the risk of tipping the appliance, the appliance must be secured by properly
installed anti-tip device packed with the appliance.
6
1.
Backsplash with integrated oven vents
2.
Cooktop
3.
Control panel
4.
Oven Handle
5.
Oven Door
6.
Storage Drawer
7.
Storage Drawer Handle
8.
Leveling Legs (4)
PARTS & FEATURES
7
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, or
WARNING
• Read all instructions before using the range.
• WARNING: TO REDUCE THE RISK OF TIPPING OF THE RANGE, THE RANGE
MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICE. TO CHECK IF
THE DEVICE IS INSTALLED PROPERLY, SILDE RANGE FORWARD, LOOK FOR
ANTI-TIP BRACKET SECURELY ATTACHED TO FLOOR, AND SLIDE RANGE BACK
SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET.
• CAUTION: Do not store items of interest to children in cabinets above a range or on the
backsplash of a range – children climbing on the range to reach items could be seriously
injured.
• Proper Installation - Be sure the range is properly installed and grounded by a qualified
technician.
• Never use your appliance for warming or heating the room.
• Do Not Leave Children Alone - Children should not be left alone or unattended in area
where the appliance is in use. They should never be allowed to sit or stand on any part
of the appliance.
• Wear Proper Apparel - Loose fitting or hanging garments should never be worn while
using the appliance.
• User Servicing - Do not repair or replace any part of the appliance unless specifically
recommended in the manual. All other servicing should be referred to a qualified
technician.
• Storage in or on Appliance - Flammable materials should not be stored in an oven or
near the surface units.
• Do Not Use Water on Grease Fires - Smother fire or flame or use dry chemical or foam-
type extinguisher.
• Use Only Dry Potholders - Moist of damp potholders on hot surfaces may result in burns
from steam. Do not let potholder touch hot heating elements. Do not use a towel or
other bulky cloth.
• Use Proper Pan Size - This appliance is equipped with one or more surface units of
different size. Select utensils having flat bottoms large enough to cover the surface unit
heating element. The use of undersized utensils will expose a portion of the heating
element to direct contact and may result in ignition of clothing. Proper relationship of
utensil to burner will also improve efficiency.
• Never Leave Surface Units Unattended at High Heat Settings – Boil over causes
smoking and greasy spillovers that may ignite.
• Make Sure Reflector Pans or Drip Bowls Are in Place - Absence of these pans or bowls
during cooking may subject wiring or components underneath to damage.
• Protective Liners - Do not use aluminum foil to line surface unit drip bowls or oven
bottoms, except as suggested in the manual. Improper installation of these liners may
result in a risk of electric shock, or fire.
• Glazed Cooking Utensils - Only certain types of glass, glass/ceramic, ceramic,
earthenware, or other glazed utensils are suitable for range top service without breaking
due to sudden change in temperature.
• Utensil Handles Should Be turned Inward and Not Extend Over Adjacent Surface Units
– To minimize burns, ignition of flammable mat erials, and spillage due to unintentional
contact with the utensil, the handle of a utensil should be positioned so that it is turned
inward, and does not extend over adjacent surface units.
injury when using the range, follow these basic
precautions:
8
• Do Not Soak Removable Heating Elements – Heating elements should never be
immersed in water.
• Do Not Cook on Broken Cook-top – If cook-top should break, cleaning solutions and
spillovers may penetrate the broken cook-top and create a risk of electric shock. Contact
a qualified technician immediately.
• Clean Cook-top With Caution – If a wet sponge or cloth is used to wipe spills on a hot
cooking area, be careful to avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
• Use Care When Opening Door – Let hot air or steam escape before removing or
replacing food.
• Do Not Heat Unopened Food Containers – Build-up of pressure may cause container to
burst and result in injury.
• Keep Oven Vent Ducts Unobstructed.
• Placement of Oven Racks – Always place oven racks in desired location while oven is
cool. If rack must be moved while oven is hot, do not let potholder contact hot heating
element in oven.
• Do Not Touch Surface Units, Heating Elements, Interior Surfaces of Oven or Areas Near
Units - Surface units and heating elements may be hot even though they are dark in
color. Area near surface and interior surfaces of an oven become hot enough to cause
burns. During and after use, do not touch, or let clothing or other flammable materials
contact surface units, areas near units or interior surfaces of oven until they have had
sufficient time to cool. Other surfaces of the appliance may become hot enough to
cause burns – among these surfaces are oven vent openings and surfaces near these
openings, oven doors, and window of oven doors.
This Unit Is For Indoor Use Only
-SAVE THESE INSTRUCTIONS-
9
INSTALLATION INSTRUCTIONS
WARNING
HAVE THIS RANGE INSTALLED BY A QUALIFIED I NSTALLER.
Improper installation, adjustment, alteration or maintenance can cause injury or pro perty damage.
Consult a qualified installer or service agency.
IMPORTANT – SAVE FOR THE LOCAL ELECTRICAL INSPECTOR’S USE.
BEFORE USING YOUR ELECTRIC RANGE
•
Remove the exterior and interior packing.
•
Check to be sure you have all of the following parts:
•
3 Six Inch Coiled Burners with Reflector Bowls(Pre-installed)
•
1 Eight Inch Coiled Burner with Reflector Bowls(Pre-installed)
•
2 Oven Racks
•
1 Broiler Tray and Grid
1 Anti-tip Bracket
(Packed in the Styrofoam packing ab ove the range – DO NOT DISCARD)
•
1 Instruction Manual
•
1 Backsplash Assembly (Backsplash and (5) five screws)
(Packed in the Styrofoam packing ab ove the range – DO NOT DISCARD)
•
Clean the interior surface with lukewarm water using a soft cloth.
•
Have your range installed and properly grounded by a qualified installer in accordance with
the installation instructions.
•
Do not attempt to repair or replace any part of your range unless it is specifically
recommended in this manual.
•
Do not remove permanently affixed labels, warnings, or plates from the product. This may
void the warranty.
•
The installer should leave these instructions with the consumer who should retain for local
inspector’s use and for future reference.
•
Please observe all local and national codes and ordinances.
NOTICE
Before you use this range for the first time:
must be burned off before use. To do this, open the oven door and set the temperature control knob to
450°F. Turn the function selector to the Bake element and the Broil element separately to approximately
15 minutes. It is important to ensure adequate ventilation during this period.
The burners also have a protective coating, which must be burned off before use. To do this, set the
burner selector to the maximum setting 5 minutes. It is important to ensure adequate ventilation. Switch off
the burners and allow cooling completely.
The heating elements have a protective coating, which
IMPORTANT:
This range is desig ned a nd manufactured s ole ly for the cooking of domestic (household) f ood and
is not suitable for any non-domestic applicatio n an d therefore should not b e used in a commercial
environment.
The range warranty will be void if the range is used within a non-domestic environment i.e. a semi
commercial, commercial or communal environment.
10
IMPORTANT PRECAUTIONS AND RECOMMENDATIONS
After having unpacked the range, check to ensure that it is not damaged and the oven door closes
correctly. In case of doubt, do not use it and consult your supplier or a professionally qualified
technician.
Packing elements (i.e. plastic bags, polystyrene foam, packing straps, etc.) should not be left around
within easy reach of children, as these may cause serious injuries.
The range has been thoroughly tested for safe and efficient operation. However, as with any
appliance, there are specific installation and safety precautions that must be followed to ensure safe
and satisfactory operation.
•
Do not attempt to modify the technical characteristics of the appliance as this may become
dangerous to use.
•
Do not carry out cleaning or maintenance operations on the appliance without having
previously disconnected it from the electric power supply.
•
After use, ensure that the knobs are in position.
•
Never touch the appliance with wet hands or feet.
•
Do not operate the appliance barefooted.
•
Do not allow children or other incapable people to use the appliance without supervision.
•
During and after use of the range, certain parts will become very hot. Do not touch hot parts.
•
Keep children away from the range when it is in use.
•
Fire Risk! Do not store flammable materials in the oven or in the bottom drawer.
•
Fire Risk! Do not attempt to dry clothing or any other type of textile in the oven or in the
bottom drawer.
•
Make sure that electrical cables connecting other appliances in the proximity of the range
cannot come into contact with the hob or become entrapped in the oven door.
•
Do not line the oven walls with aluminum foil. Do not place shelves, pans, backing trays, broil
tray or other cooking utensils on the base of the oven chamber.
•
The manufacturer declines all liability for injury to persons or damage to property caused by
incorrect or improper use of the range.
•
To avoid any possible hazard, the appliance must be installed by qualified personnel only.
Any repairs by unqualified persons may result in electric shock or short circuit. In order to
avoid possible injuries to your body or to the range, do not attempt ant repairs by yourself.
Such work should be carried out by qualified service personnel only.
•
Burn Hazard! The oven and cooking accessories may become very hot during operation.
Make sure children are kept out of reach and warn them accordingly. To avoid burns use
clothes and gloves when handling hot parts or utensils.
•
Stand away from the range when operating oven door. Hot air or steam which escapes can
cause burns to hands, face, and/or eyes.
•
Never clean the oven with any high-pressure steam cleaning devices, as it may provoke a
short circuit.
•
Do not leave anything on the top of oven vent. Never cover the oven vent opening with
aluminum foil or any other material.
•
This range is intended for household use. Never use the appliance for any other purpose.
•
If you should decide not to use the range any longer (or decide to substitute an older model),
before disposing of it, it is recommended that it be made inoperative in an appropriate manner
in accordance to health and environmental protection regulations, ensuring in particular that
all potentially hazardous parts be made harmless, especially in relation to children who could
play with old appliances. Remove the door before disposal to prevent entrapment.
11
•
INSTALLATION OF ELECTRIC RANGE
•
The electric range must be installed by a qualified tech nicia n. Make sure you have everything
necessary for correct installation. It is the installer’s responsibility to comply with installation
clearances specified in the manual.
•
Cabinet opening dimensions that are shown above must be used. Given dimensions are
minimum clearances. The minimum spacings must be maintained between the appliance
cooking surface and the horizontal surface above the cooking top.
•
30 inches is the m inim um clearanc e be t wee n th e top o f the c ooking surface and the bo ttom of
an unprotected wood or metal cabinet
•
To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage
space located above t he su r f ac e units s hou ld b e a voi d ed. If c abin et s torag e is t o be provided,
the risk can be reduced by installing a range hood that projects horizontally a minimum of 5
inches beyond the bottom of the cabinets.
•
Place your electric range on a floor that is strong enough to support it when it is fully
assembled as above picture. To level your electric range, adjust the leveling legs at the
bottom of the unit.
•
Avoid locating the unit in moist areas. As this may result in the risk of electrical shock.
ELECTRICAL CONNECTION
WARNING
The appliance must be properly installed and grounded by a qualified technician in accordance
with
the National Electrical Code ANSI/NFPA No. 70 (Latest Edition) and local electrical code
requirements.
•
The range may be connected by means of permanent “Hard Wiring” or “Power Supply Cord Kit”.
Power supply cord is not supplied, but is available through your local electric supply house.
Installation should be made by a licensed electrician.
•
Use only 3-conductor or 4-conductor UL listed range cord rated at 40 amps with 125/250V
minimum voltage range. These cords may be provided with strain relief or conduit connector.
•
The range must be connected to the proper electrical voltage and frequency as specified on the
rating label.
•
The range can be connected direc tly to the f used disconnect ( or circuit br eaker box) through
flexible, armored or non-metallic sh eathed, copper c able (with grou nding wire). Allo w two to
three feet of slack in the line so that it can be moved if servicing is ever necessary.
•
For personal safety, the range must be properly grounded.
•
Remove house fuse or open circuit breaker before beginning installation.
•
Do not attempt to repair or replace any part of the appliance unless it is specifically recommended
in this manual. All other servicing should be referred to a qualified technician.
•
To minimize the possibility of electric shock, disconnect this appliance from the A/C power supply
before attempting any maintenance.
NOTE: Turning the appliance off does not disconnect the appliance from the power supply. We
recommend having a qualified technician service your appliance.
12
13
3-
Wire Power Cord Installation
•
Remove the Terminal Block Access Plate on the back
of range by removing the 1 fixing screws.
•
Assemble the strain relief in the hole on bracket.
•
Insert the power cord through the strain relief and
tighten.
•
Allow enough slack to easily attach the cord terminals
to the terminal block.
•
Remove the 3 wire terminal nuts and washers from
the terminal block.
•
Plug the terminal holes of power cord. The neutral or
ground wire of the power cord must be connected to
the neutral terminal located in the center of terminal
block. The power leads must be connected to L1 and
L2.
•
Plug washers and tighten nuts securely.
•
Assemble the Terminal Block Access Plate.
4-
Wire Power Cord Installation
•
Remove the Terminal Block Access Plate on the back
of range by removing the 1 fixing screws.
•
Assemble the strain relief in the hole on bracket.
•
Insert the power cord through the strain relief and
tighten.
•
Allow enough slack to easily attach the cord terminals
to the terminal block.
•
Remove the 3 wire terminal nuts and washers from
the terminal block.
•
Remove the groun d str ap f r om the frame of r ange and
terminal by removing its screw and cutting is as
shown.
•
Plug the terminal holes of power cord. The neutral wire of the power cord must be connected to
the neutral terminal located in the center of terminal block. The ground wire of the power supply
cord must be attached to the frame of range by using the green colored grounding screw. The
power leads must be connected to L1 and L2.
•
Plug washers and tighten nuts securely.
•
Assemble the Terminal Block Access Plate.
14
LEVELING THE RANGE
The range must be level to obtain proper operating. The four screws
type leveling legs located on the corners at the bottom of range should
be adjusted by turning them clockwise to make the range higher or
counter-clockwise to lower the range until the range is level. Use a level
on surface units to check the leveling of the range.
ANTI-TIP BRACKET INSALLATION
To reduce the risk of tipping the range by abnormal usage or improper door loading, the range must
be secured by properly installing the anti-tip device packed with the appliance.
•
Place the anti-tip bracket on the floor as shown figure. Anti-tip bracket can be installed on either
right or left side.
•
Make the locations of 2 holes of ant-tip bracket on the floor.
•
Use a 5/16” masonry drill bit and insert plastic anchor.
•
Secure bracket to floor using screws supplied.
•
Slide appliance into position.
NOTE: If range is relocated, the bracket must be removed and installed in new location.
15
on 24” models.
2.
Indicator Lights
6.
Front Right Burner Control Knob
CONTROL PANEL
MODEL: ER24P3SG
OPERATING YOUR RANGE
Kitchen Timer
1.
(Digital or Mechanical Knob depending
5. Rear Left Burner Control Knob
on your specific model.) Only availab le
3. Oven Temperature Knob 7. Rear Right Burner Control Knob
4. Front Left Burner Control Knob 8. Oven Light Switch
16
OVEN THERMOSTAT CONTROL KNOB
Push and turn the knob clockwise to select the desired temperature up to 500° F. To switch off the
oven turn the thermostat control to the setting position.
BURNER CONTROL KNOB
The range comes with four burners. To operate the burners simply push in and turn the knob to the
desired position. These controls go from low to high power output, having a number of positions
To switch off the Burner, turn the burner control knob to the setting position.
KITCHEN TIMER SELECTOR KNOB
You can set a reminder time up to 60 minutes. At the end of the time selected you will hear the sound
of a bell. To set times less than 3 0 minutes, tur n the knob to the 30 m inute m ark and then turn to the
desired time.
OPERATING INDICATOR LIGHTS
The OVEN and BURNERS indicating li ghts will come separately when oven and top burners are
in use.
USING THE SURFACE UNITS
Your range is equipped with four surface units with two different sizes.
Three of them are 6” and one of them is 8” in size. The surface controls are
easily operated. Simply push in and turn the knob to the desired position.
When the element is energized, the indicator light will be lit
regardless of the setting when one or more of the elements are turned on.
The control has a variable of power output from LO to HI with a number of
positions. The range of heat is increased by turning the knob to HI, decreased by turning the knob to
LO.
The solid dot in the surface unit mark shows which surface unit is activated by that knob.
IMPORTANT: To switch on, always lightly press the control knob inwards then turn.
COOKWARE TIPS
The physical characteristics of pots and pans influence the performance of any cooking systems.
Therefore, emphasis must be placed on the importance of using proper cookware.
•
Use cooking vessels with flat bottoms and tight fitting lids to conserve energy and shorten cooking
times.
•
Only certain types of glass, glass/ceramic, ceramic, earthenware or other glazed utensils are
suitable for cooktop. Manufacturers suggest using low to medium heat selections when using
glass cookware.
•
Pan size should match the element size. A slightly larger pan covers the entire element and
prevents spillovers from contacting the heat surface and burning in. Using a smaller pan than the
element is a waste of energy.
•
To avoid spattering and to maximize efficiency, pan bottoms should be clean and dry before
coming in contact with the elements.
•
Wipe spills off the elements with a damp cloth as soon as they cool to cut down on clean up time.
Be sure the control is .
If a surface unit stays red for a long time, the bottom of the pan is not flat enough or is too small for
the surface unit. Prolonged usage of incorrect utensils could result in damage to the surface unit,
cooktop, wiring and surrounding areas. To prevent damage use correct utensil, start cooking on
position HI and turn control down to continue cooking.
Never leave an empty utensil, or one which has boiled dry, on a hot surface unit. The utensil could
overheat and damage the utensils or surface unit.
Always be sure that all control knobs are turned to and the indicator lights are when you are
not cooking.
17
When you first plug in the range or power has returne d after 10
hours you will see 12:00 in the display and hear an alarm tone.
Clock:
just confirm by waiting for 5 seconds.
Cook Timer:
1: Clock Time Indicator
WARNING
Make sure that the handles of cookware do not stick out over the edge of the range, to
avoid them being knocked over by accident. This also makes it more difficult for children
to reach the cooking pots/pans.
USING THE OVEN
You can use your range for Bake and Broil. For that reason, the oven has two different heating
elements which are:
-
Bake element 2100W (Lower heating element)
-
Broil element 2000W (Upper heating element)
CAUTION: The oven door becomes very hot during operation. Keep children well out of reach.
WARNING: The door is hot, use the handle.
OVEN THERMOSTAT
Rotate clockwise until the required temperature is reached (From
to 500° F).
The power indicator light signals when the heat elements are switched
or switched .
OFF
Oven Light
The oven is equipped with a light that illuminates the oven to enable visually controlling the food that
is cooking. By turning the switch on / off to light the oven cavity.
Digital Kitchen Timer
To set the clock, press and hold the SET button for once, clock
indicator will light, when the hour position flash adjust the hour by
pressing the up or down button, press SET when done repeat the
steps for the minutes and press SET to enter Cook Timer setting or
Press the SET button three times and the co o k timer indicator will
2: Digital Display
3: Down Button
4: Up Button
5: Set/Quit Button
6: Cook Timer Indicator
light. Press the up or down buttons to choose the exc ept cooktime (1 – 99 minutes, default is 1 minute). After 5 seconds, the
Setting will be confirmed and the countdown will begin.
Once the selected time has elapsed, the indicator light will turn off
and the alarm will sound 15 times or until a button is pressed.
18
Broil
In this setting only the upper element is switched . Heat is distributed by radiation.
In order to broil, use the following steps:
1.
Place the meat on the broil grid in broiler pan.
Always use the grid so that the fat drips into
the broiler pan, otherwise the juices may
catch on fire. Do not broil without using the
broiler pan.
2.
Position the broiler pan on the second level
from the top.
3.
Turn the thermostat control knob to the
BROIL temperature.
4.
When broiling is completed, turn the function selector knob and thermostat control knob to the
position, open door fully and remove the food.
Always remember that when the oven is hot, outside surfaces of the range get hot.
IMPORTANT:
Always use suitable protective gloves when inserting/removing the broiler pan, shelves, pans and
other cooking utensils from the oven.
OVEN RACK
The rack is designed with stop-locks so that when placed
correctly on the rack supporters, they will stop before coming
completely out from the oven, and will not tilt when removing
food from or placing food on them.
When placing cookwar e on the r ac k , pull the rack out to the
bump on the rack s upport. Plac e the cook ware on t he rack,
then slide the rack back into the oven.
To remove the rack from the oven, pull it towards you, tilt the
front end upward and pull it out.
19
CAR E AND MAINTENANCE
GENERAL INFORMATION
•
CAUTION: Before any operation of cleaning and maintenance disconnect the appliance
from the electrical supply.
•
It is advisable to clean when the appliance is cold and especially for cleaning the enameled parts.
•
Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the surfaces.
•
Avoid using cleaning products with a chlorine or acidic base.
•
The oven must always be cleaned after every use, using suitable products and keeping in mind
that its operation for 30 minutes on the highest temperature eliminates most grime reducing it to
ashes.
CLEANING YOUR RANGE
•
Disconnect the A/C from the main power box or designated circuit breaker, turn off the range,
make sure all surface units are off and cool before removing anything, then remove all items
including shelves and rack.
•
Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
•
Wash the shelves and rack with a mild detergent solution.
•
The outside of the range should be cleaned with mild detergent and warm water.
•
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
•
Wash the outside cabinet with warm water and mild liquid det er gen t. R inse wel l and wipe dr y with
a clean soft cloth.
•
Do not use steel wool or steel brush on the cook-top.
CLEANING SURFACE UNITS AND REFLECTOR BOWLS
•
Disconnect the A/C from the main power box or
designated circuit breaker and turn of f t he range to
make sure that burners are off and cool before
removing burners and reflector bowls.
•
Removing the burners and reflector bowls as
following:
•
Lift the edge of the unit opposite from the
receptacle, just enough to clear the reflector
bowl.
•
Pull the surface unit gen tly out of the mounting
receptacle.
•
After the unit has been re moved, the reflector
bowl can be lifted out of their mounting.
•
Clean the burners and reflector bowls with mild
detergent and warm water. Wring excess water
of the sponge or cloth when cleaning them.
•
Replace the burners and reflector bowls as
following:
•
Line up the opening of the reflector bowls with
the burners receptacle, hold the surface unit as
positioned into the receptacle, then push the surface
•
When the terminal is pushed into the receptacles as far as it will go, push down the edge of
the surface unit opposite the receptacle.
NOTE: Do not immerse burners in water or any other liquids.
out
level as possible with the terminal just
units’ terminal into the receptacle.
20
Loading...