Page 1
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
Model Number/ No. de Modelo: D110-1-IS
CLOTHES DRYER
SECADORA DE ROPA
CAUTION:
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and
specifications without notice.
Avanti Products
P.O. Box 520604 - Miami, Florida 33172
www.avantiproducts.com
Page 2
2
TABLE OF CONTENTS
Help Us Help You
3
Parts and Features
4
Important Safety Instructions
5
Installation Instructions
5
Before Using Your Dryer
5
Wall Mounting Instructions
6
Leveling Legs
7
Electrical Connection
7
Control Panel
7
Operating Your Appliance
8
Temperature Control
8
Dry Mode Selector
8
Drying Time Reference
8
Sorting Fabrics
9
Fabric Care Sheet
10
Care and Maintenance
11
Cleaning Your Appliance Ext erior
11
Cleaning the Filters
11
Troubleshooting Guide
12
Service for Your Appliance
12
Your Avanti Products Warrant y
13
Registration Information and Registration Card
15
Page 3
3
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain
your new appliance properly.
Keep it handy to answer your questions.
If you don't understand something or your
need more help, please call:
Avanti Customer Service
800-220-5570
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
IF YOU NEED SERVICE
We're proud of our ser vice and want you to be
pleased. If for som e reason you are not happ y
with the service you receive, here are some
steps to follow for further help.
FIRST, contact the people who serviced your
appliance. Explain wh y you are not pleased. I n
most cases, this will solve the problem.
Write down the model and serial numbers.
You'll find them on a plate located on the back
wall of the appliance.
Please write these numbers here:
____________________________________
Date of Purchase
____________________________________
Model Number
____________________________________
Serial Number
Use these numbers in any correspondence or
service calls concerning your appliance.
If you received a damaged appliance,
immediately contact the dealer (or builder) that
sold you the appliance.
Save time and money. Before you call for
service, check the Troubleshooting Guide. It
lists causes of minor operating problems that
you can correct yourself.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send to:
Customer Servic e
Avanti Products
10880 NW 30 Street
Miami, FL 33172
Page 4
4
PARTS AND FEATURES
Dry mode selector
Page 5
5
Important Safety Instructions
your appliance, follow these basic precautions:
During spinning, don’t put your hand in the spin basket: Because the spin basket is
-Save these instructions-
WARNING
To reduce the risk of fire, electrical shock, or injury when using
• Read all instructions before using the appliance.
• DANGER or WARNING: Risk of child entrapment.
• Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous. . . even if they will “just sit in the garage a few days.”
• Before you throw away your old appliance: Take off the door so that children may
not easily climb inside.
• Never allow children to operate, play with, or crawl inside the appliance.
• Never clean appliance parts with flammable fluids. The fumes can create a fire hazard
or explosion.
•
Do not place the dryer in st eamy room s or where the dryer is d irectly expos ed to rain . Moisture
may destroy the electrical insulation causing an electrical shock hazard.
•
rotating at high speed, rotating parts may injure your hand.
• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of
this or any other appliance. The fumes can create a fire hazard or explosion.
INSTALLATION INSTRUCTIONS
Before Using Your Appliance
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
• Instruction Manual
• Allow at least 5 inches of space between the sides of the appliance.
• Put your laundry into the dryer evenly. Uneven laundry may cause noise or vibration.
• Before drying, check all pockets. If nails or pins remain in pock ets, they ma y damage the dryer
or clothes.
• Never splash water on the control panel.
• Plug the dryer into an exclusive properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and or grounding should be directed toward a certified electrician or an
authorized Avanti Products s ervice cen ter .
Selecting a Location
Before you install the dryer, select a location with the following characteristics:
• A hard level surface (if the surface is uneven, see “Adjusting the Leveling Legs”).
• If you are going to wall mount your dryer using the wall mounting kit included (see “Wall
Mounting Instructions”).
• Away from direct sunlight. Direct sunlight may affect the acrylic coating, plastic and electrical
components.
• Adequate ventilation
• Room temperature that will not fall below 0º C.
• Away from sour ces of heat such as c oal or gas. Mak e sure that th e dryer does not s tand on its
power cord. Ventilation openings must not be obstructed by carpeting when the dryer is
installed on a carpeted floor.
Page 6
6
Wall Mounting Instructions
Tools Required
Tools and parts
Installation
Drill & Drill Bit
1
Phillips Head Screw Driver
1
Wood screws 2” long
4
Wall Mounting Kit Includes the following:
Description
Wall Hanging Bracket
2
Wall Hanging Hook
2
Plastic Spacers
2
Exhaust Pipe
4 (Pieces)
a)
Determine the positio n where you will be installing the mounting bracket.
b)
Affix the wall mounting bracket (included)
illustration (Fig. 2).
d)
Install the exhaust pipe as shown in
side left or right).
e)
Mount the dryer on the wall bracket as
** It is recommended to complete the following procedure with at least 2 people **
required for Plaster
and or Wood
(This dryer is not designed to sit directly on top of your washing machine).
(A minimum of 2 inches in required between the top of the dr yer and the ceiling to allow eas y
installation and adequate space for exhaust).
(If mounting above a washing machine, allow sufficien t spacing to open th e lid of the washer or
breathing room in the case of a front loading washer).
securely to the wall (directly to the stud).
(If a stud is not ava ilabl e, u s e a woode n s lat
between the studs to mount the bracket)
Install the Wall Hang ing Hooks as shown in
c)
illustration (Fig. 3) . (Align the Exhaust pipe
to the Exhaust Vent and turn Clockwise)
• The exhaust vent can be locked into the
position that best fits your needs.
(Upward, Downward or venting to either
shown in illustration (Fig. 4).
** It is recommended th at this step be done
by two (2) or more persons **
Page 7
7
Warning
Adjusting the leveling legs
Your dryer is shipped with the legs in the bag containing your user’s guide.
To install and adjust the leveling legs see the illustration to the right.
If the floor is uneven adjust the legs (do not insert pieces of wood, or any other objects under the legs)
• Adjust the height level of the legs accordingly.
Place the dryer on a sturdy flat surface.
If the dryer is placed on an uneven or weak surface, noise or vibration will occur. (Allowable is 1º)
Electrical Connection
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avanti Products service center.
This appliance sho uld be properly grounded for your safety. The power cord of this a ppliance is
equipped with a three-prong plug which mates with standard thr e e pro ng w al l out lets to minimize the
possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
Use of extension cord is not recommended.
This appliance requires a standard 115/120-volt, 50Hz electrical outlet with three-prong ground.
The cord should be secured behind the appliance and not left exposed or dangling to prevent
accidental injury.
CONTROL PANEL
Page 8
8
OPERATING INSTRUCTIONS
DRY MODE SELECTOR
This unit is designed with an automatic moisture sensor to monitor the moisture level of the
clothes for optimistic performance. It provides you both Auto Dry and Timed Dry modes for
your best drying performance.
Auto Dry Mode:
When the selector button is up, unit works at automatic drying mode. Please set the timer to
200 minutes and unit will start drying process till the moisture reaches setting degree, (unit
will cut off the heating element inside and terminate the drying automatically), but unit will
continue the wrinkle guard process till the timer runs to “OFF” position.
Note: For heavy items like jeans, blankets, covers, towels, etc., recommended mode is timed
dry.
Timed Dry Mode:
When the selector button is pressed down, unit will work under timer controlled mode. Set the
timer with the following references:
Page 9
9
DRYING TIME REFERENCE
Drying Capacity
Drying Times
High Heat
Low Heat
3 (Three) Lbs
30 Minutes
55 Minutes
5 (Five) Lbs
60 Minutes
110 Minutes
7 (Seven) Lbs
120 Minutes
9 (Nine) Lbs
200 Minutes
** LOAD WEIGHTS AND RESPECTIVE DRYING TIMES ARE APPROXIMATE **
Sorting Fabrics
For the best drying results, clothes should be sorted properly. Separate the lint shedders (chenille
and terry cloth) from the lint collectors (synthetics, flannel and fabrics with a nap, such as velveteen
and corduroy). Separate non-colorfast from light colored items, heavy fabrics from light weight fabrics
and permanent press from heavy, bulky items.
Do not tumble dry
Read all permanent care labels carefully. If a garment’s care label says “Drip Dry”, Line Dry” or “Dry
Flat”, do not dry in the dryer. Certain materials will melt or become dangerously flammable if heated,
while others may lose their shape. Other items that should not be tumble dried are:
• Items that have been dry-cleaned at home.
• Wool (unless the garment’s manufacturer recommends it)
• Fiberglass
• Laminated or rubber coated items
• Vinyl or plastic
• Do not use fabric softeners or products to eliminate static unless recommended by
manufacturer of the fabric softener or product.
WARNING:
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this appliance.
Drying Time
Drying time depends on many factors, such as the amount of washing, how damp it is, the type of fabrics, rated
power of the machine and the temperature of the room. It also, of course, depends on how dry you want the
washing when you take it out of the machine.
Shrinkage
Knitted fabrics in particular are liable to shrink. Do not use the extra dry program for these materials, and always
stretch them out directly after drying.
Dryer Added Fabric Softeners
Because some dryer added fabric softeners may cause damage to automatic dryers, use only ones that the
manufacturers give a written assurance that their softeners can safely be used in your dryer.
Single Items
Use the timed program when there is only one item to be dried. This is because the automatic program may turn
off the heating too early, so that the item is not properly dried.
If The Washing Is Not Dry After Tumble-Drying
When using the automatic programs, it can happen that not all of the washing is properly dry. This may be due
Page 10
10
to such reasons as very heavy fabrics or thick seams. To dry these items, give a further 10 minutes or so in the
timed program. Also do not overload the dryer. If the dryer is overloaded, its efficiency is lessened and clothes
may not dry evenly.
Do not over-dry
When using the timed program, it is possible to over-dry fabrics, if too long a time has been set. This can cause
the fabrics to wrinkle, shrink or feel harsh. Synthetic materials can also become charged with static electricity.
Fabric Care Chart
Page 11
11
CARE AND MAINTENANCE
Cleaning the Lint Filter:
a)
Removing the Lint Filters:
ALL FILTERS MUST BE IN PLACE WHEN DRYING
AFTER EACH USE.
b)
The filter assembly consists of three (3)
c)
Separate each of the above parts and
brush or vacuum cleaner. DO NOT
d)
Re-install the filter assembly
Align the entire assembly with the
is secure.
Cleaning the Air Intake Filter
a)
Removing the Air Intake Filter:
b)
Remove the filter inside the housing and
clean using a SOFT brush or vacuum
c)
Replace the filter housing by pushing
umb until the latch is
secure.
Cleaning the Exterior
• Wipe the dryer surfaces, including the control panel, with a soft cloth and non-abrasive
household detergents.
• Use a soft cloth to dry the surfaces.
• Do not pour water on the dryer.
Cleaning the Filters
Unplug the power cord prior to a ny cleaning.
Remove by pulling outward using the four
(4) grip holes in the filter assembly.
parts
(See illustration)
a) Exhaust Vent Shroud
b) Lint Filter
c) Exhaust Filter
clean the individual p ieces using a SO FT
damage the filters
Reassemble the filter assembly in order
Exhaust Filter – Lint Filter – Exhaust
Shroud
recessed position in t he b ack of the dr um
and press firmly until the entire assem bly
FILTERS MUST BE CL EA NED BEF ORE AND
Remove by pulling outwar d holding the filter
housing by the top and bottom.
cleaner.
upwards with your th
Page 12
12
PROBLEMS WITH YOUR DRYER?
PROBLEM
POSSIBLE CAUSE
Timer knob will not rotate
Drum does not rotate
Laundry not completely dry
Clean the Filter
Dryer is not located in a well ventilated area.
800-323-5029
help is available.
money order, Master Card, or Visa.
know your dryer inside and out.
You can solve many common appliance problems easily, saving you the cost of a possible service
call. Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
Not plugged in.
Dryer does not operate.
SERVICE FOR YOUR DRYER
We are proud of our customer service organization and the network of professional service
technicians that pro vide service on your A vanti appliances. With the purchase of your Avanti dr yer,
you can have the confidence that if you ever need additional information or assistance, the Avanti
Products Customer Service team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
The circuit breaker tripped or blown fuse.
Door is not closed.
Reduce the amount of clothing loaded in the
dryer.
Re-dry the loaded items
Ensure items are not knotted or bulked together.
Whatever your questions are about our products,
Part Orders
800-220-5570
In-Home Repair Service
800-220-5570
You may order parts and accessories that will be
delivered directly to your home.
You may order these items by personal check,
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
Page 13
13
Staple your sales receipt here. Proof of original
warranty.
WHAT IS COVERED – LIMITED ONE-YEAR WARRANTY
center for repair.
LIMITED FIVE YEAR WARRANTY ON PLASTIC TUB (CLOTHES WASHERS ONLY)
of the consumer.
WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:
Products, including without limitation, one or more of the following:
•
lightning, power surges, structural failures surrounding the appliance, and acts of God.
•
• Repairs performed by unauthorized servicers.
In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding
cabinetry, walls, floors, shelving etc., as well as the resetting of breakers or fuses.
OUT OF WARRANTY PRODUCT
repairs, pro-rates, or product replacement, once this warranty has expired.
Warranty – Laundry Products
YOUR AVANTI PRODUCTS
WARRANTY
purchase date is needed to obtain service under
Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of
twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon
the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless
described in detail in the warranty document. For one year from the date of purchase by the original owner,
Avanti products will, at its option, repair or replace any part of the product which proves to be defective in
material or workmanship under normal use. Avanti Products will provide you with a reasonably similar product
that is either new or factory refurbished. During this period Avanti Products will pr ov ide all parts and lab or
necessary to correct such defects free of charge, so long as the product has been installed and operated in
accordance with the written instructions in this manual. In rental or commercial use, the warranty period is 90
days. All Avanti appliances of 4.1 cubic feet capacity or less must be brought/sent to the appliance service
After one year and until five years from the date of purchase, Avanti Products will furnish a replacement plastic
tub, for one which is defective in material or workmanship. All labor and transportation charges are the
responsibility of the consumer.
LIMITED SEVEN YEAR WARRANTY ON STAINLESS STEEL TUB (Clothes Washer And Dryer)
After one year and until seven years from the date of purchase, Avanti Products will furnish a replacement tub,
for one which is defective in material or workmanship. All labor and transportation charges are the responsibility
The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti
A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes,
regulations, or laws, including failure to install the product in strict conformity with local fire and building codes
and regulations.
• Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand,
floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity,
Incidental or consequential damages
• Parts and labor costs for the following will not be
considered as warranty:
Inner door panels, door shelves, door rails,
•
and/or door supports.
Light bulbs and/or plastic housing.
•
Plastic cabinet liners.
•
• Failure of the product if it is used for other than it
intended purpose.
• Shipping and handling costs associated with the
replacement of the unit.
property, including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also
excluded from this warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces
and exposed parts; Products on which the serial numbers have been altered, defaced or removed; service visits
for customer education, or visits where there is nothing wrong with the product; correction of installation problems
(you are solely responsible for any structure and setting for the product, including all electrical, plumbing and/or
other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation
Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including
• Service calls that are related to external problems,
such as abuse, misuse, ina de quate ele ctr i ca l
power, accidents, fire, floods, or any other acts of
God.
• Surcharges including but not limited to, any after
hour, weekend, or holiday service calls, tolls, ferry
trip charges, or mileage expense for service calls to
remote areas.
• The warranty does not apply outside the
Continental USA.
Page 14
14
Page 15
15
Registration Information
Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100
days of purchase and receive these
important benefits:
Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to
help you refer to this information in the event of an insurance claim such as fire or theft.
Promote better products:
We value your input. Your responses will help us deve lop produc ts desig ned to bes t m eet
your future needs.
-----------------------------------------------------------(detach here)----------------------------------------------------------
Avanti Registration Card
__________________________________ _____________________________________
Name Model # Serial #
__________________________________ _____________________________________
Address Date Purchased Store/Dealer Name
__________________________________ ______________________________________
City State Zip Occupation
__________________________________ As Your Primary Residence, Do You:
Area Code Phone Number Own Rent
Did You Purchase An Additional Warranty: Your Age:
Extended None under 18 18-25 26-30
Reason For Choosing This Avanti Product: 31-35 36-50 over 50
Please indicate the most important factors Marital Status:
that influenced your decision to purchase Married Single
this product. Is This Product Used In The:
Price Home Business
Product Features How Did You Learn About This Product:
Avanti Reputation Advertising Product Features
Product Quality In Store Demo Personal Demo
Salesperson Recommendation Other______________________________
Friend/Relative Recommendation Comments____________________________
Warranty _____________________________________
Other_______________________ _____________________________________
Page 16
16
Version# 05222017-001
PRINTED IN CHINA
Loading...