Avanti COR30W3S User Guide
Model / Modelo / Modéle: COR30W3S
COMMERCIAL OUTDOOR
COMMERCIAL
INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves
the right to change materials and specifications without notice.
Avanti Products LLC
www.avantiproducts.com
REFRIGERATOR
REFRIGERADOR COMERCIAL
PARA USO EXTERIOR
RÉFRIGÉRATEUR EXTERIEUR
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
P.O. Box 520604
Miami, FL 33152
1
TABLE OF CONTENTS
Appliance Safety
3
Important Safeguides
4
Help Us Help You
5
Parts and Features
6
Important Safety Instructions
7
Installation Instructions
7 – 9
Electrical Connection
10
Operating Your Appliance
11 - 12
Care and Maintenance
13 - 14
Troubleshooting Guide
15
Service for Your Appliance
16
Wiring Diagram
16
Your Avanti Products Warranty
17
Instrucciones en Español
18 – 31
Instructions en Français
32 -45
Registration Information and Registration Card
Last
page
2
APPLIANCE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance.
Always read and obey all safety messages.
This is the Safety Alert Symbol. This
personal injury or death.
Warning means that failure to heed this
or death.
equipment damage.
All safety messages will alert you to what the potential hazard is, tell you how to reduce the
chance of injury, and let you know what can happen if the instructions are not followed.
symbol alerts you to potential hazards
that can kill or injure you and others.
All safety messages will follow the Safety
Alert Symbol and either the wards”
DANGER”, “WARNING” or “CAUTION”.
Danger means that failure to heed this
safety statement may result in severe
safety statement may result in extensive
product damage, serious personal injury,
Caution means that failure to heed this
safety statement may result in minor or
moderate personal injury, or property or
FLAMMABLE REFRIGERANT G AS
DANGER - Risk of fire or explosion. Flammable refrigerant used.
DO NO
tubing.
DANGER - Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained
service personnel. DO NOT puncture refrigerant tubing.
CAUTION
guide before attempting to service this product. All safety precautions must be followed.
CAUTION
regulations. Flammable refrigerant used.
CAUTION
instructions carefully. Flammable refrigerant used.
CAUTION
vicinity of the cooler.
T use mechanical devices to defrost refrigerator. DO NOT puncture refrigerant
- Risk of fire or explosion. Flammable refrigerant used. Consult repair manual / owner’s
- Risk of fire or explosion. Dispose of property in accordance with federal or local
- Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling
- To prevent a child from being entrapped, keep out of reach of children and not in the
3
IMPORTANT SAFEGUARDS
Before the unit is used, it must be properly positioned and installed as
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and
recommended in this material. All other servicing should be referred to a qualified technician.
• Use two or more people to move and install the appliance. Failure to do so can result in back or
• Do not use this apparatus for other than its intended purpose.
described in this manual, so read the manual carefully. To reduce the risk of
fire, electrical shock or injury when using the unit, follow basic precautions,
including the following:
•
do not use an extension cord
• Replace all panels before operating
• It is recommended that a separate circuit, serving only your unit, be provided. Use receptacles
that cannot be turned off by a switch or pull chain
• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or explosion.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
• Do not connect or disconnect the electric plug when your hands are wet
• Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can
result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically
other injury.
• To ensure proper ventilation for your appliance, the unit must be completely unobstructed.
0
Choose a well-ventilated area with temperatures above 55
F (130C) and below 900F (32 0C). This
unit must be installed in an area protected from the elements, such as wind, rain, water spray or
sunlight.
• The appliance should not be located next to ovens, grills or other sources of high heat.
• The appliance must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
• Do not kink or pinch the power supply cord of the appliance.
• The fuse (or circuit breaker) size should be 15 amperes.
• It is important for the appliance to be leveled in order to work properly. You may need to make
several adjustments to level it.
• All installation must be in accordance with local plumbing code requirements.
• Make certain that the pipes are not pinched or kinked or damaged during installation.
• Check for leaks after connection.
• Never allow children to operate, play with or crawl inside the appliance
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may
damage or discolor the interior.
4
HELP US HELP YOU...
Read this guide carefully.
IF YOU NEED SERVICE
We're proud of our service and want you to
NEXT, if you are still not pleased, write all the
CAUTION:
It is intended to help you operate and
maintain your new appliance properly.
Write down the model and serial numbers.
find them on a plate located on the rear
You'll
outside wall of the appliance.
Keep it handy to answer your questions.
If you don't understand something or you
need more help, please call:
Avanti
Keep proof
your sales slip) with this guide to establish
the warranty period.
Customer Service
800-220-5570
of original purchase date (such as
THIS APPLIANCE IS NOT
DESIGNED FOR THE
STORAGE OF MEDICINE OR
OTHER MEDICAL PRODUCTS.
Please
write these numbers here:
_________________________________
Date of Purchase
_________________________________
Model Number
_________________________________
Serial Number
Use these num
service calls concerning your appliance.
u received a damaged appliance,
If yo
immediately contact the dealer (or builder) that
sold you the appliance.
Save t
ime and money. Before you call for service,
check the Troubleshooting Guide. It lists causes
of minor operating problems that you can correct
yourself.
bers in any correspondence or
be pleased. If for some reason, you are not
happy with the service you receive, here are
some steps to follow for further assistance.
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
details, including your telephone number, and send
it to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172 USA
5
PARTS AND FEATURES
1
Control Panel
2
Right Upper Hinge
3
Door Seal
4
Door
5
Handle
6
Right Lower Hinge
7
Kick Plate
8
Wheels (4) (2 w ith brakes)
9
Wire Shelf
10
Glass Shelves (2)
11
Carbon Filter Assembly
6
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, or
- SAVE THESE INSTRUCTIONS -
WARNING
basic precautions:
This Unit Is Designed for Indoor and Outdoor Use
injury when using your refrigerator, follow these
− Read all instructions before using the refrigerator.
− DANGER or WARNING: Risk of child entrapment. Child entrapment and suffocation are not problems of
the past. Junked or abandoned refrigerators are still dangerous . . . even if they will “just sit in the garage a
few days”.
− Before you throw away your old refrigerator: take off the doors. Leave the shelves in place so that
children may not easily climb inside.
− Never allow children to operate, play with, or crawl inside the refrigerator.
− Never clean
− Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other
refrigerator. The fumes can create a fire hazard or explosion.
refrigerator parts with flammable fluids. The fumes can create a fire hazard or explosion.
INSTALLATION INSTRUCTIONS
Before Using Your Refrigerator
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
o 1 Wire shelf
o 2 Glass Shelves
o 1 Handle
o 4 Casters (2 – Standard, 2 – With Brakes)
o Instruction Manual
• Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This
will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Installation of Your Refrigerator
• This appliance is designed to be for free standing installation, recessed or built-in (fully recessed).
• Place your Appliance on a floor that is strong enough to support it when it is fully loaded. To level
your Appliance, adjust the front leveling legs at the bottom of the Appliance.
• Locate the Appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the unit not to perform
properly.
• Plug the Appliance into an exclusive, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized Avanti Products service center.
• Avoid locating the refrigerator in moist areas. Too much moisture in the air will cause frost to form
quickly on the evaporator requiring more frequent defrosting of the refrigerator.
7
REVERSING THE DOOR SWING OF YOUR REFRIGERATOR
This uni
you with the doors opening from the left side. Should you desire to reverse the opening direction, please
call service for reversal instructions.
t has the capability of the doors opening from either the left or right side. The unit is delivered to
INSTALLING STAINLESS STEEL HANDLE
This unit includes a stainless steel handle that is not required to operate this unit. To
install the handle please follow the below instructions:
1.
Pull away the door gasket in the area where the handle is to be installed as
shown below in Illustration # 1. The gasket is easily displaced by hand, no
tools are necessary.
2.
Align the handle with the screws pre-installed on the backside of the door.
Tighten the screws using a Phillips head screwdriver until the handle sets
both flush and secured tightly against the door frame. (DO NOT overtighten
as this will cause damage to the handle assembly).
3.
Replace the door gasket to its original position.
1 Gasket 2 Screwdriver 3 Handle
WHEELS:
1. Remove the pre-installed feet.
2. Screw in the front 2 wheels by hand as shown below.
3. Screw in the back 2 wheels with screws as shown below.
8
Cabinet Opening Dimensions
IN (min)
CM (min)
Width
15 ½”
39.5
Depth
22”
57.5
Height
34 ½”
87.6
BUILT – IN CABINET INSTRUCTIONS
This unit is designed for both built-in or free standing installation. If you plan to use
this unit in a built- in application, please follow the requirements shown to the right.
9
Electrical Connecti on
Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord
is damaged, have it replaced by an authorized Avanti Products service center.
This appliance should be properly grounded for your safety. The power cord of this
a qualified electrician or service technician install an outlet near the appliance.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly
and that the electrical rating of the cord be 115 volts and at least 10 amperes.
SURGE PROTECTOR
Most electrical appliances use a series of electric control boards to operate. These
licensed electrician in your area.
Damages due to power surges are not considered a manufacturer covered defect
and will void your product warranty.
appliance is equipped with a three-prong plug which mates with standard three prong
wall outlets to minimize the possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power
cord supplied.
This appliance requires a standard 115Volts~/60Hz electrical outlet with three-prong
ground.
The cord should be secured behind the appliance and not left exposed or dangling to
prevent accidental injury.
Never unplug the appliance by pulling the power cord. Always grip the plug firmly and
pull straight out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have
recommended that you do not use an extension cord with this unit. However, if you
must use an extension cord it is necessary that it be a UL/CUL-Listed, 3-wire
grounding type appliance extension cord having a grounding type plug and outlet
boards are very susceptible to power surges and could be damaged or destroyed.
If the appliance is going to be used in an area or if your city / country is prone to
power surges / outages; it is suggested that you use a power surge protector for all
electrical devices / appliances you use. The surge protector that you select must
have a surge block high enough to protect the appliance it is connected to. If you
have any questions regarding the type and size of surge protector needed contact a
10
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient
temperature is between 72- 78 degrees Fahrenheit. If the ambient temperature is
above or below recommended temperatures, the performance of the unit may be
affected. For example, placing your unit in extreme cold or hot conditions may
cause interior temperatures to fluctuate. The range of 34 - 50 degrees Fahrenheit
may not be reached.
°C/°F
ON/OFF POWER
- Press and
is turned off, the appliance will stop working.
hold for 2 seconds on control panel to turn on or turn off the cooler, when cooler
LIGHT SETTING
- There are two light modes, press and hold for 3 seconds to select light mode.
1. Light on and
show , when door is opened, the light will turn on automatically, when door is closed the light will
be turned off.
2. Light on model: Press and hold for 3 seconds to enter light on mode, when in this mode,
LCD screen will display and light will always be on.
off mode: The default setting of light will be controlled by sensor and LCD screen will
TEMPERATURE SETTING
- Press or to adjust the temperature of the appliance, and each press on the button
Will alter t
- Press
he temperature by 1°F。
and together and hold for 3 seconds to change temperature display from
Celsius
to Fahrenheit
11
WARNING SYSTEM
1. Door
and LCD screen display and beep 3 times every 5 seconds, press any key or close the door to
stop the alarm.
2. Low t
to alarm; Press any key to stop the beeping alarm.
3. High t
beep to alarm; Press any key to stop the beeping alarm.
open alarm: When door has been opened for over 5 minutes, door open alarm will be on
emperature alarm: When inside temperature is below 36ºF/2°C for over 3 hours, it will beep
emperature alarm: When inside temperature is above 77ºF/25°C for over 6 hours, it will
Defrosting Your Refrigerator
There is no need to defrost the refrigerator compartment, because ice depositing on the inner back wall
is defrosted automatically. Ice may deposit on the inner back wall during the compressor operation;
later, when the compressor is not operating the ice will defrost and the water drops collect and drain
through the outlet in the inner back wall into the drain pan situated above the compressor, from where
is evaporates.
CAUTION: Do not use boiling water becaus e it may dama ge the plastic parts. In a dditi on, nev er
use a sharp or metallic in strument to remove fro st as it may dam age the co oling co ils and will
void the warranty. We recommend using a plastic scraper.
12
CARE AND MAINTENANCE
CLEANING YOUR APPLIANCE
•
Turn off the power, unplug the appliance, and remove all items including
shelves.
•
Wash the inside surfaces with a warm water and baking soda solution. The
solution should be about 2 tablespoons of baking soda to a quart of water.
•
Wash the shelves with a mild detergent solution.
•
Wring excess water out of the sponge or cloth when cleaning area of
the controls, or any electrical parts.
•
Wash the outside cabinet with warm water and mild liquid detergent. Rinse
well and wipe dry with a clean soft cloth.
•
Do not use steel wool or steel brush on the stainless steel. These will
contaminate the stainless steel with steel particles and rusting may occur.
POWER FAILURE
•
Most power failures are corrected within a few hours and should not affect
the temperature of your appliance if you minimize the number of times the door
is opened. If the power is going to be off for a longer period of time, you need
to take the proper steps to protect your contents.
MOVING YOUR APPLIANCE
•
Remove all items.
•
Securely tape down all loose items (shelves) inside your appliance.
•
Tape the door shut.
•
Be sure the appliance stays secure in the upright position during
transportation. Also protect outside of appliance with a blanket, or similar
item.
ENERGY SAVING TIPS
•
The appliance should be located in the coolest area of the room, away
from heat producing appliances, and out of the direct sunlight.
13
1
Remove the bottles / cans stored on the two (2)
shelves in front of the filter.
2
Remove the shelves and set aside to be replaced
once you have changed the filter
3
Hold the filter and turn it at 90 degrees in the counter-
clockwise direction and then pull it out.
4
Remove the existing filter and replace with a new
one.
5
Put the new filter into the hole and then turn the filter
CHARCOAL FILTRATION SYSTEM
Your appliance is equipped with an active charcoal filtration system to ensure air
purity, cooling efficiency, and to maintain an odor free cabinet for the storage of
your beverages. The filter assembly is located at the rear panel inside your
cooler. Keep in mind, that this filter must be changed every 12 months.
To replace your filter:
at 90 degrees in clockwise direction..
14
PROBLEMS WITH YOUR APPLIANCE?
PROBLEM
POSSIBLE CAUSE
Appliance does not operate.
The circuit breaker tripped or a blown fuse.
Appliance is not cold enough.
Check the temperature control setting.
The door gasket does not seal properly.
Turns on and off frequently.
The room temperature is hotter than normal.
The door gasket does not seal properly.
The light does not work.
Not plugged in.
The light button is “OFF”.
Vibrations.
Check to assure that the appliance is level.
The appliance seems to make too much noise.
The rattling noise may come from the flow of the
The appliance is not level.
The door will not close properly.
Display flashes Error message “H1”
Display flashes Error message “L1”
Temperature sensor failure.
Inner Fan Failure.
You can solve many common problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before
calling the servicer.
TROUBLESHOOTING GUIDE
Not plugged in.
The appliance is turned off.
External environment may require a higher
setting.
The door is opened too often.
The door is not closed completely.
A large amount of contents has been added to
the unit.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The circuit breaker tripped or a blown fuse.
refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
appliance.
Contraction and expansion of the inside walls
may cause popping and crackling noises.
Display flashes Error message “F1”
The appliance is not level.
The gasket is dirty.
The shelves are out of position.
Temperature sensor failure.
Contact the Avanti Service Department
1 - 800 – 220 - 5570
Contact the Avanti Service Department
1 - 800 – 220 - 5570
Contact the Avanti Service Department
1 - 800 – 220 - 5570
15
Loading...