Autostart CLCD4, TDK4, RLCD4 Users Manual

AUTOMATIC TRANSMISSION MULTI-CHANNEL

TWO-WAY LCD REMOTE STARTER

SYSTEM

AS-2510 TW

User Guide

Transmitter Part Number and Module Serial

Number .......................................................2

Introduction.................................................2

What is “eSH” Technology?........................2

Basic Remote Operation ............................2

LCD Remote Functions ..............................3

Basic Vehicle Operation .............................3

Alarm Clock ................................................4

Time Adjust Mode....................................... 4

Countdown Timer .......................................4

Parking Countdown ....................................4

Melody Selection ........................................4

Vibration Mode............................................4

Power Saving Mode ...................................4

Remote Control Finder ...............................4

LCD Remote Operation ..............................4

Basic Vehicle Operations.......................5

Transmitter Mode Selection...................5

Alarm and Countdown Adjustments ......5

Cold Weather Mode...............................5

Home Valet LCD Transmitter Operation and

Confirmations..............................................7

Timing and Alarm Adjustment................8

Transmitter Finder .................................8

Remote-starting Your Vehicle.....................8

Vehicle Presets......................................8

Driving Off..............................................8

.........................................6

Using the AS-2510 TW: Advanced Features9

Idle Mode...............................................9

Turbo Mode ...........................................9

“Home Valet” ™ Mode...........................9

Remote Valet Mode...............................9

Valet Mode ..........................................10

Panic Mode (this option must be

programmed) .......................................10

Quick Lockout

Remote Door Locks Option .................10

Cold Weather Mode.............................11

Priority Door Access............................11

The user-selectable options are as

follows:.................................................11

Remote Door Locks Option .................11

Safe Start.............................................11

Starter Kill Option ................................11

Passive or Active Arming ....................11

Ignition-controlled Door Locks Option.12

Ignition Relock .....................................12

Secure Lock Option.............................12

Remote Trunk Release Option............12

Engine Run Time.................................12

Multi-car Operation ..............................12

Diagnostics – Parking Lights Flash Rate

(Normal Operation)................................... 12

..................................10

H.1.50.S.2.00 Rev: 1.05 October 16, 2003 – Fb CA Manufactured in Canada by Autostart

FCC USER NOTICE (U.S.A.):

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

Transmitter Part Number and Module Serial Number

The box below contains important information concerning your Transmitter and your Module. We have entered your Transmitter Part Number. Should you need to order a new Transmitter, you will need to provide Autostart with the Part Number written below.

Transmitter Part Number:

CAR : AS5000TW-FM IVU REMOTE : AS5000TW-FM HHU

Transmitter (companion) Part Number:

ASTR-2144

The installer is to write in the following box the Module’s serial number.

Module Serial Number:

Introduction

The AS-2510 TW is a state-of-the-art remote car starter system with command confirmation. It represents a major breakthrough in vehicle convenience technology and remote starter systems.

What is “eSH” Technology?

"eSH" technology uses Manchester decoding along with advanced custom data filters to help reduce data-bit transfer errors. This filtering mechanism minimizes dropped commands by the transceiver and develops more reliable range. By using narrow band filtering and unique software driven noise filters, the radio set is able to achieve much better input sensitivity resulting in up to 2000 feet of operating range.

Basic Remote Operation

Your AS-2510 TW is equipped with a multi-channel 5-button LCD remote transmitter. It can operate two independent Autostart-equipped vehicles (see Multi-car Operation for 2 functions).

P.2 User Guide AS-2510 TW

car

The functions of the transmitter are as follows:

Note: Pressing the

LCD Remote Functions

LOCK and UNLOCK buttons simultaneously will activate the AUX 2 output.

The Transmitter offers several command-confirmation and timer features. This section explains some of the key functions available on the Remote Control. Next section gives a summary of the button combinations used to access the functions (see LCD Remote Operation Tables).

Note:

If you wish to exit a function while still in the process of accessing it, simply stop and wait for at least 10 seconds: the Remote Control will return to its normal state.

Basic Vehicle Operation

The vehicle can be remote-started and stopped using the START/STOP ( ) button. The on the vehicle). The

the Doors of the vehicle (if the Remote Door Lock feature is installed on the vehicle) and arm or disarm the Starter Kill (if installed). The

AS-2510 TW User Guide P.3

TRUNK ( ) button will open the Trunk (if this feature is installed

LOCK ( ) and UNLOCK ( ) buttons will lock and unlock

FUNCTION

( ) button is used to access all advanced functions of the Remote Control. (Refer to the LCD Operation and Confirmations tables.)

Alarm Clock

The LCD Remote Control has a built-in Alarm Clock which can be set up

using the button. Use the and buttons to switch the Alarm Clock on and off (refer to the tables).

Time Adjust Mode

Use Time Adjust Mode to set the current time on your Remote Control

using the

button (refer to the tables).

Countdown Timer

This feature allows set up a countdown of a duration entered by the user in

hours and minutes using the button (refer to the tables).

Parking Countdown

This version of the Countdown feature is particularly useful for keeping track of parking meter time: the user may quickly set up the countdown in

slices of 10 or 30 minutes using the

and buttons (refer to the tables).

Melody Selection

The Remote Control allows the user to select which melodies are to be used upon the following events: remote starting of the vehicle, the Alarm, ending of the countdown, entering Cold Weather Mode. Melodies for these

various events can be selected using the

button (refer to the tables).

Vibration Mode

Use this feature to replace audible signals with a vibration signal. Use

the and buttons to switch Vibration Mode ON and OFF (refer to the tables).

Power Saving Mode

When set to Power Saving Mode, the Remote Control will cease polling the Remote Starter Module on a regular basis for status information. This will

extend battery life. Use the Mode ON and OFF (refer to the tables).

and buttons to switch Power Saving

Remote Control Finder

This function allows the user to locate the Remote Control when it has been accidentally dropped near the vehicle. Pressing the Valet Button and holding it down for 3 seconds (or until the Parking Lights flash five times) will cause the Remote Control to start beeping for one minute. The beeping will stop by itself after one minute, or it can be switched off by pressing the

Lock (

LCD Remote Operation

(First Car Control)

NOTE:

The following section explains the functions the Transmitter can provide. If you wish to exit a function while you are accessing it, simply stop and wait at least 10 seconds, the Transmitter will return to normal.

) or the Unlock ( ) button on the Remote Control.

P.4 User Guide AS-2510 TW

+ 9 hidden pages