Autostart AS-PRG-1000 User Manual

AS PRG-1000

AUTOSTART TECH TOOL

USER GUIDE

AS PRG-1000

AS PRG-1000

AUTOSTART TECH TOOL

PRG-1000 Parts

The PRG-1000 includes:

• The handheld unit and a 9-volt battery;

• The PC-LINK adaptor, which enables communication between the PRG-1000 and

a personal computer. This connectivity with a personal computer offers the
capability of upgrading the PRG-1000 firmware and other additional features,
such as saving/recalling personal programming options files on a computer.

• The MODULE cable enables communication between the remote starter and the

PRG-1000. This T harness, which connects to the remote starter antenna, allows
the unit to be programmed and/or read even when the remote starter is powered
off.

Fig. 1

To PC-LINK

adapter

To computer USB

port

To PRG-1000

PC-LINK
connector

Fig. 2

Female to

Antenna

Male to Antenna

cable

To

PRG-1000

AS PRG-1000

AUTOSTART TECH TOOL

• The OBDII cable enables communication between the PRG-1000 and a

vehicle’s OBDII system. The PRG-1000 recognizes multiple car networks – i.e.,
J1850, ISO9141, KWP2000 and CAN. The user can erase most GENERIC

OBDII DIAGNOSTIC TROUBLE CODES (DTCs). The PRG-1000
does not erase specific codes – i.e., most airbags and antipollution DTCs.

• The PRG-1000 comes with two test leads and alligator clips, which can be used

to locate a valid tachometer source.

Fig. 3

Fig. 4