Autostart AS-6400i TW-FM User's Guide

TWO-WAY LED AUTOMATIC TRANSMISSION

REMOTE STARTER WITH FULL ALARM SYSTEM

User Guide

Table of Contents

Introduction............................................. 1

Using the Remote Control ......................2

Feature Confirmation Chart .................... 3

Vehicle Status Request .......................... 3

Status Request When the Engine IS NOT

Running ..................................................3

Status Request When the Engine is

Running ..................................................4

Alarm Status ........................................... 5

How Run Time Cycles Work................... 6

Multi-Level Features (default state)......... 6

Remote-Starting Your Vehicle ................ 7

Vehicle Presets....................................... 8

Driving Off............................................... 8

Using the Remote Starter ....................... 8

Arming and Disarming the Security

System.................................................... 8

Idle Mode................................................ 8

Turbo Mode ............................................9

Valet Mode.............................................. 9

Valet Mode Using the Valet Switch (if

installed) ................................................. 9

Ignition Valet........................................... 9

Remote Valet Mode.............................. 10

“Home ValetTM” Mode ........................... 10

Panic Mode........................................... 10

Quick LockoutTM.................................... 10

Temporary Chirp Delete .......................11

Cold Weather Mode.............................. 11

Advanced Features: Installation-

programmable Options ......................... 11

Passive or Active Arming...................... 11

Remote Door Locks.............................. 12

Priority Door Access ............................. 12

Ignition-Controlled Door Locks and

Relock................................................... 12

Secure Lock.......................................... 12

Remote Trunk Release......................... 12

The Starter Kill and the Anti-grind Feature

.............................................................. 12

Safe Start.............................................. 13

Home Valet TM....................................... 13

Turbo Mode ..........................................13

Engine Run Time.................................. 13

Extended Run Time.............................. 13

Multi-car Operation ............................... 13

Shock Sense, Warn-away Sense ......... 14

Siren or Horn Chirps............................. 14

Disarmed Notification............................ 14

Car Finder............................................. 14

Flashing LED ........................................ 14

Troubleshooting Transmitting Range.... 15

Intrusion Codes through the LED Light. 15

Diagnostics – Chirps Table................... 15

Diagnostics – Parking Light Flash Table16

Introduction

This is a state-of-the-art remote starter system. The system is packed with advanced features such as priority access to the driver’s door (commodity features) and the safe start children safety feature. With many an advanced function, this product will satisfy any one your expectations from high-end commodity and security systems, without neglecting any standard feature commonly offered by entry-level starters.

DOC.: 1.01 – October 30, 2006 CA LP Manufactured in Canada

INDUSTRY CANADA USER NOTICE:

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.

FCC USER NOTICE (U.S.A.):

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

Using the Remote Control

Your remote starter is equipped with a 5-button multi-channel remote control. It can operate two independent vehicles equipped with a remote starter (see Multi-car operation section on page

13). The functions of the transmitter are as follows:

Picture serves as example only.

• Pressing and holding the LOCK button for more than 3 seconds will lock all doors and will send a constant pulse as long as the

LOCK button is held down (maximum of 15 seconds). This

constant pulse can be configured to activate certain functionalities such as rolling up the windows – Please refer to your installer to see if your vehicle is compatible with this option.

• Pressing and holding the send a constant pulse as long as the

UNLOCK button for more than 3 seconds will unlock all doors and will

UNLOCK button is held down (maximum of 15 seconds).

This constant pulse can be configured to activate certain functionalities such as rolling down the windows – Please refer to your installer to see if your vehicle is compatible with this

option.

P. 2 User Guide

Feature Confirmation Chart

Feature LED #1 LED #2 LED #3 LED #4 Beep(s)

Lock 3 flashes X X X 1

Unlock X 3 flashes X X 2

Trunk X X 3 flashes X 1

Start X X X 3 flashes 1

Running X X X 3 flashes 3

Stop X X X 3 flashes 2

Entering Cold

Weather Mode

Exiting Cold

Weather Mode

Home Valet 3 flashes X X 3 flashes 2

Valet Mode 3 flashes X X 3 flashes 1

Exit Valet Mode X 3 flashes X 3 flashes 1

X X X 3 flashes 1...+ ... 2

X X X 3 flashes 1... + ...1

Vehicle Status Request

The status request feature allows the user to see the status of the vehicle i.e.: if the doors are locked or unlocked or if the vehicle is in cold weather mode, home valet mode, in valet mode or how much time is left in the run time cycle. The following charts (Tables 1, 2 and 3) indicate the confirmation sequences.

To retrieve the vehicle status:

Press and release the SHIFT button then press and release the TRUNK button (there will be a beep). The transmitter will then flash the corresponding sequence of LEDs depending on the vehicle’s status.

x If the engine is NOT running, refer to Table 1. x If the engine IS running under a remote start, refer to Table 2 (if the doors are locked)

or refer to Table 3 (if the doors are unlocked). The status request feature is a two-step procedure:

• The first sequence of flashes denotes if the vehicle’s doors are locked or unlocked.

• The second sequence of flashes (if applicable) denotes if the vehicle is Cold weather mode,

Home valet mode, or, Valet mode.

• If there is no second sequence transmission, that the vehicle is not in any of the three (3) mentioned features (Cold weather mode, Home valet mode or Valet mode).

Status Request When the Engine IS NOT Running

STATUS SEQUENCE LED #1 LED #2 LED #3 LED #4 Beep(s)

Lock

Unlock

Cold

Weather

1st sequence if

locked

1st sequence if

unlocked

sequence X X X 1 second X

3 flashes X X X 1

X 3 flashes X X 2

3 flashes X X X 2

X 3 flashes X X 2

User Guide P. 3

STATUS SEQUENCE LED #1 LED #2 LED #3 LED #4 Beep(s)

Home

Valet

Mode

1st sequence if

locked

1st sequence if

unlocked

sequence 1 second X X 1 second X

1st sequence if

locked

1st sequence if

unlocked

sequence 1 second X X 1 second X

3 flashes X X X 2

X 3 flashes X X 2

3 flashes X X X 1

X 3 flashes X X 1

Table 1

Status Request When the Engine is Running

When the vehicle’s doors are locked:

RUN TIME SEQUENCE LED #1 LED #2 LED #3 LED #4 Beep(s)

If there is more than 3/4 of run time cycle

If there is more than half of run time cycle

1st sequence 3 flashes X X X 3

sequence ON for 1-sec ON for 1-sec ON for 1-sec ON for 1-sec X

1st sequence 3 flashes X X X 3

sequence ON for 1-sec ON for 1-sec ON for 1-sec X X

If there is

1st sequence 3 flashes X X X 3

more than 1/4 of run time cycle

If there is less

than 1/4 of

run time cycle

sequence ON for 1-sec ON for 1-sec X X X

1st sequence 3 flashes X X X 3

sequence ON for 1-sec X X X X

Table 2

P. 4 User Guide

When the vehicle’s doors are unlocked:

RUN TIME SEQUENCE LED #1 LED #2 LED #3 LED #4 Beep(s)

If there is

more than

3/4 of run

time cycle

1st sequence X 3 flashes X X 3

sequence ON for 1-sec ON for 1-secON for 1-sec ON for 1-sec X

If there is

1st sequence X 3 flashes X X 3 more than half of run time cycle

If there is

sequence ON for 1-sec ON for 1-secON for 1-sec

X X

1st sequence X 3 flashes X X 3 more than

1/4 of run

time cycle

If there is

sequence ON for 1-sec ON for 1-sec X X X

1st sequence X 3 flashes X X 3

less than 1/4 of run

time cycle

sequence ON for 1-sec X X X X

Table 3

Alarm Status

STATUS SEQUENCE LED #1 LED #2 LED #3 LED #4 Beep(s)

Door

Hood

Ignition

Shock

Trunk

Remote

finder

If door is

opened

If hood is

opened

If ignition is

turned ON

If shock

activated

If trunk is

opened

Valet switch on for 3 sec.

1. flash

2. flash

flash flash flash flash continuous

1. flash

2. X

1. flash

2. flash

1. flash

2. X

1. flash

2. X

1. flash

2. X

1. flash

2. flash

1. flash

2. X

X X X X continuous

1. flash

2. X

1. flash

2. X

1. flash

2. X

1. flash

2. flash

1. flash

2. X

1. flash

2. flash

1. flash

2. X

1. flash

2. X

Table 4

continuous

User Guide P. 5

+ 11 hidden pages