Autostart AS-6320 FM Wiring Guide

Programming Options

Mode 1 *indicates default setting

Function 1 – Ignition-Controlled Door locks

OPTION 1* Ignition Lock disabled

OPTION 2 Ignition lock enabled OPTION 3 Ignition unlock only OPTION 4 Ignition lock only

Function 2 – Secure Lock

OPTION 1* Secure Lock disabled (1-sec. disarm pulse.)

OPTION 2 Secure Lock enabled in smart mode. OPTION 3 Secure Lock disabled (0.5 Sec disarm pulse) OPTION 4 Secure Lock enabled in normal mode. OPTION 5 Standard secure lock enabled (no rearm pulse when

Function 3 – Door Locks Pulse Timing

OPTION 1* 7/10 second lock/unlock pulses.

OPTION 2 4 seconds lock/unlock pulses. OPTION 3 7/10 seconds lock pulse and two 1/4 second unlock

OPTION 4 1/10 second lock/unlock pulses.

Function 4 – AUX 3 Programming

OPTION 1* Constant while the TRUNK button is pressed

OPTION 2 1-sec. Trunk 1 output when

OPTION 3

OPTION 4

Function 5 – AUX 2 Programming

OPTION 1* Priority Door access (Pressing UNLOCK a 2nd time

OPTION 2 Toggle ON/OFF with a 30-second timeout (press

ignition is on)

pulses.

TRUNK button pressed

for 3 sec. while Ignition is OFF and data output.

TRUNK with disarm/rearm (shock is ignored while

zone 3 is opened.)

TRUNK 1 sec output ON/OFF

triggers AUX 2) o Car Finder enabled (pressing SHIFT and then

LOCK triggers Car Finder)

o The Driver’s Door unlocks upon the 1st

pressing of the UNLOCK button;

o All Doors unlock on any subsequent pressing

of the UNLOCK button.

SHIFT and then LOCK) Car Finder disabled.

OPTION 3 Constant output while pressed (press

OPTION 4 Priority Door access on 2

LOCK) Car Finder disabled.

enabled.

x The Driver’s door unlocks upon the 1

pressing of the

UNLOCK button.

x All Doors unlock upon the 2

the

UNLOCK button.

SHIFT and then

Unlock, and Car Finder

, 3rd, 5th …

, 4th, 6th… pressing of

Mode 2 *indicates default setting

Function 1 – N/A

OPTION 1 N/A

OPTION 2* N/A

OPTION 3 N/A

Function 2 – Safe Start

OPTION 1 Safe Start enabled

OPTION 2* Safe Start disabled

OPTION 3 Swap Start – increased safety mode:

Function 3 – Engine Run Time

OPTION 1 Run time - 4 minute in Gas mode / 9 minutes Diesel

OPTION 2* Run time - 15 minute in Gas mode / 20 minutes Diesel

OPTION 3 Run time - 25 minute in Gas mode / 30 minutes

Function 4 – Idle/Turbo Mode

OPTION 1 Idle/Turbo Mode disabled

OPTION 2* Turbo Mode enabled

OPTION 3 Turbo Mode disabled

Function 5 – Engine Type and Cold Weather Mode

OPTION 1 Diesel Engine Mode and 20-minute run time in Cold

OPTION 2* Gasoline Engine Mode and 4-minute run time in Cold

OPTION 3 Diesel Engine Mode and 9-minute run time in Cold

To Start: press

SHIFT and then LOCK buttons.

Press the Start button to activate Aux 2.

mode.

Diesel mode.

Weather Mode.

Mode 3 *indicates default setting

Function 1 – Siren Chirps

OPTION 1 Warning Chirps only; Lock Confirmation if the Lock

button is press 2nd time.

OPTION 2* Chirps enabled.

OPTION 3 Chirps enabled with Open-Zone notification.

(Siren warning 10 sec. after arming if a door is left open) (Also used for vehicles with Dome Light Delay).

OPTION 4 Chirps disabled and Lock confirmation if the Lock

button is press 2nd time.

Function 2 – Passive Or Active Arming

OPTION 1 Active Arming

OPTION 2* Passive Arming (30 sec.)

OPTION 3 Passive Arming (30 sec.) / no TWO-STAGE

DISARM

OPTION 4 Active Arming with Disarmed Notification.

Function 3 – Ignition Monitoring: Siren Mode / Horn Mode

OPTION 1 Siren Mode: Ignition Monitoring – disabled.

OPTION 2* Siren Mode: Ignition Monitoring – enabled.

OPTION 3 Horn Mode: Ignition Monitoring – disabled. OPTION 4 Horn Mode: Ignition Monitoring – enabled.

PROGRAMMING OPTIONS AND WIRING DIAGRAM

Function 4 – Shock Sense / Warn Away

OPTION 1 Shock Sense - Ignored / Warn Away – ignored

OPTION 2* Shock Sense - monitored / Warn Away – monitored

OPTION 3 Shock Sense - Monitored / Warn Away – ignored OPTION 4 Shock Sense - Ignored / Warn Away – monitored

Function 5 – Ignition Valet

OPTION 1 Ignition Valet - DISABLED

OPTION 2* Ignition Valet - ENABLED

OPTION 3 Ignition Valet – ENABLED

Mode 4 *indicates default setting

Function 1 – MULTI-LEVEL FEATURES

OPTION 1 Multi-car Features, Basic Features, Customized

Features

OPTION 2* Basic Features, Multi-car Features, Customized

Features

OPTION 3 Customized Features, Multi-car Features, Basic

Features

OPTION4 Basic Features, Customized Features, Multi-car

Features

AS-6320FM

PROGRAMMING OPTIONS AND WIRING DIAGRAM