2009 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be
reproduced in any form, by any method, for any purpose.
Certain materials included in this publication are reprinted with the permission of the copyright holder.
Trademarks
The following are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries: 3DEC (design/logo), 3December,
3December.com, 3ds Max, ADI, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD
Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk
Insight, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch,
AutoTrack, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil 3D, Cleaner,
Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Create>what's>Next>
(design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio,
Design|Studio (design/logo), Design Web Format, Discreet, DWF, DWG, DWG (logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DXF,
Ecotect, Exposure, Extending the Design Team, Face Robot, FBX, Filmbox, Fire, Flame, Flint, FMDesktop, Freewheel, Frost, GDX Driver, Gmax,
Green Building Studio, Heads-up Design, Heidi, HumanIK, IDEA Server, i-drop, ImageModeler, iMOUT, Incinerator, Inferno, Inventor, Inventor
LT, Kaydara, Kaydara (design/logo), Kynapse, Kynogon, LandXplorer, LocationLogic, Lustre, Matchmover, Maya, Mechanical Desktop, Moonbox,
MotionBuilder, Movimento, Mudbox, NavisWorks, ObjectARX, ObjectDBX, Open Reality, Opticore, Opticore Opus, PolarSnap, PortfolioWall,
Powered with Autodesk Technology, Productstream, ProjectPoint, ProMaterials, RasterDWG, Reactor, RealDWG, Real-time Roto, REALVIZ,
Recognize, Render Queue, Retimer,Reveal, Revit, Showcase, ShowMotion, SketchBook, Smoke, Softimage, Softimage|XSI (design/logo),
SteeringWheels, Stitcher, Stone, StudioTools, Topobase, Toxik, TrustedDWG, ViewCube, Visual, Visual Construction, Visual Drainage, Visual
Landscape, Visual Survey, Visual Toolbox, Visual LISP, Voice Reality, Volo, Vtour, Wire, Wiretap, WiretapCentral, XSI, and XSI (design/logo).
The following are registered trademarks or trademarks of Autodesk Canada Co. in the USA and/or Canada and other countries:
Backburner,Multi-Master Editing, River, and Sparks.
The following are registered trademarks or trademarks of MoldflowCorp. in the USA and/or other countries: Moldflow, MPA, MPA
(design/logo),Moldflow Plastics Advisers, MPI, MPI (design/logo), Moldflow Plastics Insight,MPX, MPX (design/logo), Moldflow Plastics Xpert.
All other brand names, product names or trademarks belong to their respective holders.
Disclaimer
THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC. DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.
Published by:
Autodesk, Inc.
111 Mclnnis Parkway
San Rafael, CA 94903, USA
Contents
Chapter 1Getting Started with Network Administration and
Network administration and deployment requires careful planning and execution. This section
gives you information about how to prepare for deployment, set up a license server, and set
up and distribute the program.
If you are not familiar with network administration and deployment, you should familiarize
yourself with the following topics before you attempt to deploy and administer the program
over a network.
Deployment Preparation
To prepare for a deployment, you should take the time to review the following
requirements and options.
System Requirements
This section contains the system requirements for the location of the
administrative image that you create, the network license server, and the client
workstation.
Before you begin installing the program on a network, make sure that your
servers and client workstations meet the minimum recommended hardware
and software requirements for a deployment.
The program will automatically detect if the Windows operating system is the
32- or 64-bit version when installing AutoCAD. The appropriate version of
1
AutoCAD will be installed. The 32-bit version of AutoCAD cannot be installed
on a 64-bit version of Windows vice-versa.
See the following tables for administrative image, license server, and client
workstation system requirements.
Hardware and Software Requirements - Administrative Image Location
2 GB or above (recommended)Hard disk
The location where you create the administrative image must be a shared location so
that users can access the administrative
image.
Hardware and Software Requirements - Network License Server
Operating system
Computer/processor
Network interface card
Windows Vista® 32-bit SP1
Windows Vista 64-bit SP1
Windows® XP 32-bit SP3
Windows XP 64-bit SP2
Windows 2003 R2 Server Edition
Windows 2000 Server Edition
Linux 64-bit Red Hat Enterprise Linux
5.0 WS (U4)
Apple® Mac® OS 32-bit Intel 10.4.9
and later
Pentium® III or higher
450 MHz (minimum), Intel Mac
Compatible with existing Ethernet network infrastructure
The Network License Manager
supports Ethernet network configurations only.
The Network License Manager
supports multiple network interface cards, but at least one must
be an Ethernet card.
32-bit Hardware and Software Requirements
Operating systems
Windows® XP Home and Professional
Edition SP2 or later
Microsoft® Windows Vista® SP1 or later
including:
2 | Chapter 1 Getting Started with Network Administration and Deployment
TCP/IPCommunication protocol
The Network License Manager
uses TCP packet types.
For more information on Windows
Vista versions see http://www.mi-
crosoft.com/windowsvista/versions/
32-bit Hardware and Software Requirements
■ Windows Vista Enterprise
■ Windows Vista Business
■ Windows Vista Ultimate
■ Windows Vista Home Premium
Browser
CPU type
3D Modeling Additional Requirements
Internet Explorer® 7.0 or later
Windows XP - Intel® Pentium® 4 or AMD
Athlon™ Dual Core processor, 1.6 GHz
or higher with SSE2 technology
Windows Vista - Intel Pentium 4 or AMD
Athlon Dual Core processor, 3.0 GHz or
higher with SSE2 technology
Windows XP - 2 GB RAMMemory
Windows Vista - 2 GB RAM
1024 x 768 with True ColorDisplay resolution
Installation 1 GBHard disk
MS-Mouse compliantPointing device
■ Intel Pentium 4 or AMD Athlon
processor, 3.0 GHz or higher; or Intel or AMD Dual Core processor, 2.0
GHz or higher
■ 2 GB RAM or greater
■ 2 GB free hard disk space available
not including installation
■ 1280 x 1024 32-bit color video display adapter (True Color) 128 MB
A 32-bit AutoCAD cannot be installed
on a 64-bit Windows operating system and vice-versa.
System Requirements | 3
32-bit Hardware and Software Requirements
or greater, Direct3D® capable
workstation class graphics card
64-bit Hardware and Software Requirements
Operating systems
Windows® XP Professional x64 Edition SP2
or later
Microsoft® Windows Vista® SP1 or later
including:
■ Windows Vista Enterprise
■ Windows Vista Business
■ Windows Vista Ultimate
■ Windows Vista Home Premium
Internet Explorer 7.0 or laterBrowser
AMD Athlon 64 with SSE2 technologyCPU type
AMD Opteron™ with SSE2 technology
Intel Xeon with Intel EM64T support and
SSE2 technology
Intel Pentium 4 with Intel EM64T support
and SSE2 technology
Windows XP - 2 GB RAMMemory
Windows Vista - 2 GB RAM
1024 x 768 with True ColorDisplay resolution
Installation 1.5 GBHard disk
For more information on Windows
Vista versions see http://www.mi-
crosoft.com/windowsvista/versions/
A 64-bit AutoCAD cannot be installed on a 32-bit Windows operating system and vice-versa.
MS-Mouse compliantPointing device
3D Modeling Additional Requirements
■ Intel Pentium 4 or AMD Athlon processor, 3.0 GHz or higher; or Intel or
AMD Dual Core processor, 2.0 GHz or
higher
4 | Chapter 1 Getting Started with Network Administration and Deployment
64-bit Hardware and Software Requirements
■ 2 GB RAM or greater
■ 2 GB free hard disk space available not
including installation
■ 1280 x 1024 32-bit color video display
adapter (True Color) 128 MB or
greater, Direct3D® capable worksta-
tion class graphics card
Choose an Installation Type
When you set up your deployment, you need to choose the type of installation
to deploy. In the AutoCAD Deployment wizard, you specify one of the
following installation types:
Network License installation With this type of installation, you install the
program to workstations with the files and registry entries that allow the
program to communicate with the Network License Manager. You also define
the configuration of the Network License Manager so that the licenses can be
accessed. Workstations running the program based on a network installation
do not require individual activation. Licensing of this program is managed
by at least one license server.
The main advantage is that you can install AutoCAD on more systems than
the number of licenses you have purchased (for example, purchasing 25
licenses but installing on 40 workstations). At any one time, AutoCAD runs
on the maximum number of systems for which you have licenses. This means
you get a true floating license.
Multi-Seat Stand-Alone installation (Stand-Alone option) Choose this type
of installation for stand-alone installations where a single serial number and
product key are used for multiple seats. Multi-seat stand-alone installations
do not rely upon the Network License Manager to manage product licenses;
however, you can still use the AutoCAD Deployment wizard to create
administrative images and deployments. Registration and activation is more
automated for multi-seat stand-alone installations. After the first activation
using the multi-seat stand-alone serial number and product key, activation
occurs automatically for all workstations based on this deployment, as long
as your systems are connected to the Internet.
Stand-Alone installation (Stand-Alone option) Choose this type of
installation for stand-alone installations where a single serial number and
Choose an Installation Type | 5
product key are used for a single seat. Like a multi-seat stand-alone installation,
you do not use the Network License Manager to manage product licensing,
but installation, registration, and activation occurs on each workstation.
If you choose one of the Stand-Alone installation types, you can proceed to
the section Distributing the Program on page 12.
Choose a License Server Model
If you chose the Network License option, you need to decide which license
server model to use to distribute the product licenses.
TIP If you are deploying a stand-alone or multi-seat stand-alone installation type,
you do not use a license server model. Proceed to Distributing the Program on
page 12.
For the network installation, use one of the following license server models:
■ Single license server model. The Network License Manager is installed on
a single server, so license management and activity is restricted to this
server. A single license file represents the total number of licenses available
on the server.
■ Distributed license server model. Licenses are distributed across more than
one server. A unique license file is required for each server. To create a
distributed license server, you must run the Network License Manager on
each server that is part of the distributed server pool.
■ Redundant license server model. You use three servers to authenticate a
single license file. One server acts as the master, while the other two provide
backup if the master server fails. With this configuration, licenses continue
to be monitored and issued as long as at least two servers are still functional.
The license file on all three servers is the same. You must install the
Network License Manager on each server.
Each of these license server models is described in detail in the Network LicensingGuide. It is strongly recommended that you read that guide before you deploy
the program. You can find the Network Licensing Guide by clicking the Read
the Documentation selection, the Documentation link at the lower left corner
of the Deployment wizard, or in the Help system.
6 | Chapter 1 Getting Started with Network Administration and Deployment
Setting Up Network Tools and Your License Server
If you are planning to have users run the program using network licenses, you
need to use the Network License Manager and the Network License Activation
Utility. The Network License Manager helps you configure and manage license
servers. The Network License Activation Utility helps you get licenses and
register them over the Internet.
Installing the Network License Manager
The Network License Manager is used to configure and manage the license
servers.
To install your Network License Manager
1 In the AutoCAD Installation wizard, click Install Tools and Utilities.
2 On the Select the Products to Install page, select Autodesk Network License
Manager and click Next.
3 Review the Autodesk software license agreement for your country or
region. You must accept this agreement to proceed with the installation.
Choose your country or region, click I Accept, and then click Next.
NOTE If you do not agree to the terms of the license and want to terminate
the installation, click Cancel.
4 On the Review - Configure - Install page, review your product selection
and the current settings. If you don’t want to make any changes, click
Install. If you want to change the install type or installation path, click
Configure.
5 On the Select the Installation Location page, accept the default installation
path (C:\Program Files\Autodesk Network License Manager\) or Browse to
specify a different path. If you enter a path that does not exist, a new
folder is created using the name and location you provide. Click Next.
WARNING Do not install the Network License Manager on a remote drive.
When you install the Network License Manager files, you must provide a path
to a local drive. You must specify the drive letter; the universal naming
convention (UNC) is not supported.
Setting Up Network Tools and Your License Server | 7
6 On the Configuration Complete page, click Configuration Complete to
return to the confirmation page.
7 On the Review - Configure - Install page, click Install.
8 When the Installation Complete page displays, click Finish.
Installing and Using the Network License Activation
Utility
With the Network License Activation Utility, you can obtain licenses over the
Internet, which saves time and effort in setting up a network-licensed version
of the program. In addition, you can register your product, get automated
support by email if you cannot obtain a license over the Internet, and save
and migrate license files automatically.
To install your Network License Activation Utility
1 In the AutoCAD Installation wizard, click Install Tools and Utilities.
2 On the Select the Products to Install page, select Network License
Activation Utility and click Next.
3 Review the Autodesk software license agreement for your country or
region. You must accept this agreement to proceed with the installation.
Choose your country or region, click I Accept, and then click Next.
NOTE If you do not agree to the terms of the license and want to terminate
the installation, click Cancel.
4 On the Review - Configure - Install page, review your product selection
and the current settings. If you don’t want to make any changes, click
Install. If you want to change the install type or installation path, click
Configure.
5 On the Select the Installation Type page, select Typical or Custom and
either accept the default installation path (C:\Program Files\AutodeskNetwork License Manager\Network License Activation Utility\) or Browse to
specify a different path. If you enter a path that does not exist, a new
folder is created using the name and location you provide. Click Next.
6 On the Configuration Complete page, click Configuration Complete to
return to the confirmation page.
8 | Chapter 1 Getting Started with Network Administration and Deployment
7 On the Review - Configure - Install page, click Install.
8 When the Installation Complete page displays, click Finish.
To use your Network License Activation Utility
1 Do one of the following:
■ (Windows XP or Windows Vista) Click Start menu ➤ All Programs
2 On the Obtain a Network License page, review how this utility works and
the requirements for using it, and then click Next.
3 On the Server Information page, enter the product serial number.
NOTE If you are modifying an existing license file or obtaining a new license
for an existing product, your previously entered information might be
displayed. Make sure that the serial number that is displayed is the one you
want to license. If it is not, enter the correct product serial number.
4 In the License Server Model section, click a license server model. For more
information about each license server model, click the ? button.
5 In the Server Host Name box, enter a server host name to locate the name
of each server you plan to use.
6 In the Host ID box, for each server host name you entered in the previous
step, click Lookup to have the utility automatically locate the host ID for
the server, or enter the host ID manually.
NOTE If your server has more than one network adapter, select the one that
corresponds to a physical network adapter. To determine which adapters are
physical, enter ipconfig /all at a Windows command prompt and view the
Description field above each physical address. If there is more than one
physical network adapter, you can use any one of them, as long as it was
listed when you ran ipconfig /all. Logical devices such as VPN adapters, PPP
adapters, and modems may be listed but are not usable for licensing.
7 If you chose Distributed Server in step 4, the Seats box is displayed. In
the Seats box, enter the number of seats for each license server, and then
click Next.
8 On the Confirm Server Information page, review the server information
you entered, and click Next.
Installing and Using the Network License Activation Utility | 9
9 If the Register and License Your Autodesk Product page is displayed, do
all of the following, and then click Next.
■ In the This Product Is To Be Registered To option, select Company or
Individual.
■ In the Select Country or Region section, select your country or region
of residence.
■ In the Is This an Upgrade section, select Yes or No.
10 If the Registration Information page is displayed, enter your registration
information, and then click Next.
11 If the Confirm Information page is displayed, review your registration
information, and then click Next.
12 If the Connecting page is displayed, click Next to connect to the Internet
to obtain your network license.
13 On the Licenses Received page, in the Save License File for [computer name]
dialog box, enter the location where you want to save your license file,
or click Browse to navigate to the location.
NOTE It is recommended that you save your license file to the location where
you installed the Network License Manager.
14 If you have an existing license file from another Autodesk product, select
one of the following options:
■ Insert the New License Information Into It. The new license
information is added into the existing license file.
■ Overwrite the Existing License File. The entire contents of the existing
license file is replaced with the new license information. Select this
option only if you no longer require any part of the existing license
file contents.
15 Click Next.
16 On the License Activation Successful page, click Print to save a printed
copy of the license information, or click Done to complete the transaction
and exit the Network Activation utility.
10 | Chapter 1 Getting Started with Network Administration and Deployment
Configure Your License Server
You configure a license server so that you can manage AutoCAD licenses you
received when you ran the Network License Activation Utility. Configure the
license server with the lmtools.exe utility.
To configure your license server
You should be logged in with Administrator rights when working with the
LMTOOLS utility.
1 Do one of the following:
■ (Windows XP) Click Start menu ➤ All Programs ➤ Autodesk ➤
Network License Manager ➤ LMTOOLS.
■ (Windows Vista) Double-click the LMTOOLS icon on the desktop.
2 In the Lmtools program, on the Service/License File tab, make sure the
Configure Using Services option is active.
3 Click the Config Services tab.
4 In the Service Name list, select the service name you want to use to
manage licenses.
By default, the service name is FLEXnet Service 1. If FLEXnet® is managing
other software on your computer in addition to Autodesk, you can change
the service name to avoid confusion, for example, you can rename FLEXnetService 1 to Autodesk Server1.
NOTE If you have more than one software vendor using FLEXnet for license
management, the Service Name list contains more than one option. Make
sure that only one Autodesk service is listed.
5 In the Path to Lmgrd.exe File field, enter the path to the Network License
Manager daemon (lmgrd.exe), or click Browse to locate the file.
By default, this daemon is installed in the C:\Program Files\AutodeskNetwork License Manager folder.
6 In the Path to the License File box, enter the path to your license file, or
click Browse to locate the file.
This is the path to the license file obtained by the Network License
Activation Utility or the location where you placed the license file if you
obtained it offline.
Configure Your License Server | 11
7 In the Path to the Debug Log File box, enter a path to create a debug log,
or click Browse to locate an existing log file.
It is recommended that you save to the \Program Files\Autodesk NetworkLicense Manager folder. The log file must have a .log file extension. For
new log files, you must enter the .log extension manually.
8 To run lmgrd.exe as a service, select Use Services.
9 To automatically start lmgrd.exe when the system starts, select Start Server
at Power Up.
10 Click Save Service to save the new configuration under the service name
you selected in step 4. Click Yes when prompted if you would like to save
the settings to the service.
11 Click the Start/Stop/Reread tab and do one of the following:
■ If a service has not yet been defined for Autodesk, click Start Server
to start the license server.
■ If a service for Autodesk is already defined and running, click ReRead
License File to refresh the Network License Manager with any changes
made to the license file or Options file.
The license server starts running and is ready to respond to client requests.
12 Close lmtools.exe.
Distributing the Program
Once you have fully prepared for creating a deployment, you are ready to set
up and distribute AutoCAD by using the Deployment wizard and choosing a
deployment method.
Create a Network Share
A network share is an installation folder that you make available to users'
computers on a network. You point users to this location to install the program.
Create a network share that will be used by the AutoCAD Deployment wizard
during the creation of a client deployment.
A shared folder is required for network license and multi-seat stand-alone
methods of installation. Any subfolders that are placed inside a network shared
folder are automatically shared.
12 | Chapter 1 Getting Started with Network Administration and Deployment
NOTE You must have Full Control permissions set for your shared folder when
you are creating your deployment images. Read permissions are necessary to
access the network share and administrative permissions on the workstation where
the program is deployed.
To create a network share folder
1 On the desktop of a network server, create a folder named Deployments.
2 Right-click the Deployments folder and click Share and Security (or Sharing).
3 In the <folder name> Properties dialog box, Sharing tab, select Share This
Folder.
4 Specify a Share Name, such as Deployments, if necessary.
5 Click the Permissions button. In the Permissions dialog box make sure
Full Control is active. Click OK.
In Vista, right-click the Deployments folder and then click Share. In the
Properties dialog box select Sharing and then Advanced Sharing to share
the folder. Click the Permissions button to make sure Full Control is
active. Click OK.
These steps are important when creating your deployment images.
6 Click OK or Close to close the Properties dialog box.
7 For each product you plan to install, create a subfolder in the Deployments
folder. Name each folder with the pertinent product name.
Minimize the Chances of Installation Failure
The AutoCAD installation process may stop if some applications, such as
Microsoft Outlook or virus checking programs, are running when you are
creating a deployment. Close all running applications and temporarily disable
virus checking utilities.
Minimize the Chances of Installation Failure | 13
Distributing an AutoCAD Product
You can choose from several methods of distributing an Autodesk program.
Network sharing is the default method.
■ Network Share. Users launch the program with the shortcut icon that you
created with the Deployment wizard. The program is installed on users'
local computers, and a product icon appears on their desktop.
NOTE Users must have Read permissions to access the network share and
administrative permissions on the workstation where this program is installed.
■ Scripting. See Create Scripts That Install Programs on page 49.
■ Group Policy Objects (GPOs). See Distribute a Deployment Through Group
Policies on page 58.
■ Microsoft SystemCenter Configuration Manager (SCCM). See Tasks for
Deploying Autodesk Software with SCCM on page 65.
■ Imaging Software. See To distribute a network licensed product to multiple
computers using a master image on page 72.
14 | Chapter 1 Getting Started with Network Administration and Deployment
Setting Up a Deployment
2
The deployment process provides you with numerous options for creating, and customizing
your deployments, so you should set aside ample time to complete the process in one sitting.
To be successful it is recommended that your review the following checklist and information
before you begin. The deployment process is initiated from the Deployment wizard. Once a
deployment is created, users then access the deployment to install products to their computers.
Preliminary Tasks for a Network Deployment
The deployment checklist gives you a quick summary of the type of information
you should be familiar with before begin. When you have completed these
tasks, you are ready to create a deployment.
Deployment Checklist
You have reviewed the system requirements. You must make sure that your
network, servers, and client workstations meet the system requirements.
You understand the type of license you’ve purchased. If you plan a network license deployment, you should also be familiar with the type of license server
model you want to use and the license server name(s).
You have installed and activated any supporting tools and utilities.
You have located your product serial number and product key. The serial number
and product key are located on the outside of the product packaging, or in the
email you received if you downloaded your product.
You know how you’re going to personalize the program(s) during registration.
Using consistent registration data is very important.
15
Deployment Checklist
You have identified the location (such as a shared folder) where deployments
will reside for each program you plan to deploy.
You have closed all other programs and disabled anti-virus software.
You have decided what language(s) you will include in your administrative image,
and what language(s) you will use for your deployment package.
You have determined if your deployment plan involves using imaging software
to distribute your program(s) to client workstations.
You have specified whether you want to create log files that contain deployment
and installation data, run silent mode, and participate in the Customer Involvement Program.
You know which type of installation you’ll perform—typical or custom.
You have chosen the installation folder option, and locations of your support
file content.
You may want to set search paths to custom files or file locations that may have
changed in this release of software.
You have decided if you want to include additional files with your deployment
such as drawing files, AutoLISP routines, or script files.
You have checked for service packs that might be available for your product.
You have configured access to Communication Center. Live Update notifications
let you know when product updates are posted and configuring Communication
Center lets users access technical information.
You have set up access and participation in features like the Customer Involvement Program, and Customer Error Reporting.
Configure Button
During the deployment process, you can create a deployment that uses the
default settings, or you can create a customized deployment. To customize,
16 | Chapter 2 Setting Up a Deployment
you begin in the Review - Configure - Create Deployments dialog box. Select
the appropriate product from the drop-down list, and click the Configure
button.
The following options are available after you click the Configure button. See
Your Deployment Choices on page 18 for more details about deployment
options.
■ Select the License Type - Stand-alone or Network license
■ Select the Installation Type - Typical or Custom
■ Select Installation Folders for Support Content
■ Define Search Paths and File Locations
■ Install Additional Files
■ Specify User Preferences
■ Include Service Packs
■ Configure InfoCenter Communication Center
■ Configure Access to Online Resources
When you finish selecting options for your customization, click the
Configuration Complete button. The Review - Configure - Create Deployments
dialog box is displayed again, and you can review your selections. Once you
have confirmed your selections, click Create Deployment.
NOTE To get a copy of your settings, select the Copy to Clipboard button.
If you do not wish to make configuration changes on the Review - Configure
- Create Deployments page, click Create Deployment. Then click Yes, to
continue creating your deployment using the default configuration.
Configure Button | 17
Your Deployment Choices
When you create a deployment, you will make several choices during the
process to create various client deployment images and deployment types.
The following sections outline your choices in more detail.
Enter Product and User Information
The Product and User Information page is used to personalize the program
for your environment. The information you enter is permanently retained
with the product and is displayed in the Help menu on all workstations.
Because you can't change this information later without uninstalling, take
care when entering the information.
You must also enter the product serial number and product key in order to
run the product. The product serial number and product key are located on
the product packaging, or in the electronic fulfillment messaging. The serial
number must contain a three-digit prefix followed by an eight-digit number.
The product key consists of five digits.
18 | Chapter 2 Setting Up a Deployment
Your client’s can review this product information later, on the InfoCenter
toolbar, click the drop-down arrow next to the Help button (the question
mark). Then click About.
Specify Log File Locations
The program has two types of log files with which you can monitor
information about deployments and installations.
■ Network log. The network log file keeps a record of all workstations that
run the deployment. On the General Deployment Settings page of the
deployment process, you choose whether or not to create a network log
file. The log lists the user name, workstation name, and the status of the
installation. Refer to this file for status information and details about
problems that users encountered during installation (for example, low disc
space or inadequate permissions).
The network log is named with the same name you chose for your
deployment. You can specify where the log file is created by entering either
a valid UNC (universal naming convention) path or hard-coded path on
your network, for example \\MyComputer\Autodesk\<Autodesk product>.
Users should use their actual computer name in place of MyComputer.
NOTE The folder where the network log resides must be a shared folder where
users who install the program have Change permissions. Otherwise, successes
or failures for user installations cannot be written to the log file.
■ Client log. The client log contains detailed installation information for
each workstation. This information may be useful in diagnosing installation
problems. The client log is located in the %Temp% directory of each client
workstation.
Specify Log File Locations | 19
To specify a log file location
1 While creating a deployment, on the General Deployment Settings page,
select the check box next to the Create Network Log box. Enter the name
of the folder where you want the network log to be located.
2 If you want to create a client log, select the Create Client Log option.
3 Click Next.
What Is Silent Mode?
When silent mode is active and a user initiates the deployment, the installation
proceeds without any explicit user input. Users cannot change any of your
installation settings. No dialog boxes are presented that require interaction
from the user.
Customer Involvement Program (CIP)
If you choose to have your clients participate in the Customer Involvement
Program, specific information about how you use AutoCAD is forwarded to
Autodesk. This information includes what features you use the most, problems
that you encounter, and other information helpful to the future direction of
the product.
NOTE You can also enable or disable the Customer Involvement Program from
the CAD Manager Control utility.
Select a License Type (optional)
When you set up your deployment, you choose the type of installation to
deploy based on the type of software license you purchased: stand-alone or
20 | Chapter 2 Setting Up a Deployment
network. You also select the network license server model you want to use to
distribute product licenses.
IMPORTANT Depending on the type of option you choose on the configuration
page, network or stand-alone license, note that you must use the same type of
installation for all those products in your deployment session. If you select products
that do not support the type of license you purchased, you will not be able to
activate those products.
Specify the license type to use during deployment
Stand-alone license (a single serial number for a single seat) For a
stand-alone license, you install, register, and activate the program on each
workstation.
Network license With this type of installation, you install the program to
workstations with the files and registry entries that allow the program to
communicate with the Network License Manager. You also define the
configuration of the Network License Manager so that the licenses can be
accessed. Workstations running the program based on a network installation
do not require individual activation. Licensing of this program is managed
by at least one license server.
To deploy a stand-alone license
1 While creating a deployment, on the Select the License Type page, select
Stand-alone License.
2 Click Next.
Specify the license server model during deployment
If you choose the Network License option, you need to decide which license
server model to use to distribute your product licenses - single, distributed or
redundant license server model. For more information about license server
models, see Choose a License Server Model on page 6.
If you are deploying a stand-alone or multi-seat stand-alone installation type,
you do not use a license server model.
Select a License Type (optional) | 21
To deploy a network license using a single license server model
1 While creating a deployment, on the Select the License Type page, select
the Network license option.
2 Select Single License Server as the license server model you want to use
with the Network License Manager.
If you have already used the Network License Manager to create a license
server model, you must select the same license server model in this step.
If you have not yet used the Network License Manager to create a license
server model, make sure that you select the same settings in the Network
License Manager that you choose here.
3 Enter the server name of the server that will run the Network License
Manager, or click the Browse button to locate the server. Click Next.
For more information about license server models and setting up your license
server, see Choose a License Server Model on page 6 or Configure Your License
Server on page 11.
To deploy a network license using a distributed license server model
1 While creating a deployment, on the Select the License Type page, select
the Network license option.
2 Select Distributed License Server as the license server model you want to
use with the Network License Manager.
If you have already used the Network License Manager to create a license
server model, you must select the same license server model in this step.
If you have not yet used the Network License Manager to create a license
server model, make sure that you select the same settings in the Network
License Manager that you choose here.
3 Enter the name of one of the servers that will run the Network License
Manager, or click the Browse button to locate the server. Click Add to
add the server to the Server Pool. Once all the servers are added to the
Server Pool list, use the Move Up and Move Down buttons to arrange the
servers in the order you want them to be searched by a user's workstation.
You must enter at least two servers. Click Next.
For more information about license server models and setting up your license
server, see Choose a License Server Model on page 6 or Configure Your License
Server on page 11.
22 | Chapter 2 Setting Up a Deployment
To deploy a network license using a redundant license server model
1 While creating a deployment, on the Select the License Type page, select
the Network License option.
2 Select Redundant License Server as the license server model you want to
use with the Network License Manager.
If you have already used the Network License Manager to create a license
server model, you must select the same license server model in this step.
If you have not yet used the Network License Manager to create a license
server model, make sure that you select the same settings in the Network
License Manager that you choose here.
3 In the First Server Name field, enter a server name of one server that will
run the Network License Manager, or click the Browse button to locate
the server. Enter the server names for the remaining two servers that you
will use in the redundant server pool. Click Next.
For more information about license server models and setting up your license
server, see Choose a License Server Model on page 6 or Configure Your License
Server on page 11.
Select the Installation Type (optional)
As part of making your deployment choices, you select the type of installation
that users receive when they install the program, choose which optional tools
or features are included, and specify where the product is installed on each
workstation.
Select the Installation Type (optional) | 23
You choose the location where program files are installed on the client
workstation in the Product Install Path. To help decide where the product is
installed, a chart of drives and disc space is provided.
To deploy a typical installation, choose optional tools, and specify a product
location
1 During the deployment, on the Select the Installation Type page, select
Typical as the type of installation that you want.
2 Enter the path on the client workstation where you want to install the
program, for example C:\Program Files\<Autodesk product>.
The Disc Space Requirements chart lets you review available drives and
disc space.
3 Click Next.
To deploy a custom installation, choose optional tools, and specify a product
location
1 During the deployment, on the Select the Installation Type page, select
the Custom option as the type of installation that you want.
24 | Chapter 2 Setting Up a Deployment
2 From the Select Features to install list, select the features that you want
to install.
If, after making feature changes, you decide you want the original
selections, click the Restore Defaults button on the Select the Installation
Type page.
3 Enter the path on the client workstation where you want to install the
program, for example C:\Program Files\<Autodesk product>.
The Disc Space Requirements chart lets you review available drives and
disc space.
4 Click Next.
Select Installation Folders for Support Content
On the Select Installation Folders for Support Content page, you choose where
your support content gets installed by specifying a folder other than the default
user profile folder used in previous releases. As a network administrator, these
options give you greater control over where you place support content during
installations or deployments.
Select Installation Folders for Support Content | 25
Support files consist of five main types:
■ Support - Includes default font, customization (.cui files), menu source,
hatch pattern, and linetype files.
■ Plotter - Includes plot style (.ctb files), and plot configuration files (.pc3
and .pmp files).
■ Data Link - Contains data links files.
■ Template - Drawing and Sheet Set, and Publish to Web templates.
■ Render - Texture and bump maps, WebLight files.
Among the four options available, you can now choose a single shared location,
local or network, where all your support content is installed. The illustration
and table below outline the other available options.
There are four support content folder options:
NotesOptions
Local user profile folders
Program install folder
■ Texture maps installed to %ALLUSERSPROFILE%
■ All other content installed to %USERPROFILE%\Roaming AppData
■ No content stored in %USERPROFILE%\Local AppData
■ All content is installed to the AutoCAD installation folder on indi-
vidual user station
■ User may need power user privilege to install AutoCAD
26 | Chapter 2 Setting Up a Deployment
NotesOptions
■ User may need power user privilege to run AutoCAD on a system
where support content is installed to the OS Program Files folder
Single shared folder
Custom folders
An Overwrite Existing Files in Shared Network Folders check box is available
when either the Single Shared folder or Custom folder options is selected. If
the box is checked, the existing files in the chosen folder are overwritten. No
additional warning is given. If the box is unchecked, a warning message is
displayed.
■ Allows for a unique network path to be specified for all content
types
■ Subfolders for content types installed within this location
■ When a deployment is pushed to individual workstations, content
is copied into the network location only once when the deployment
is created
■ Allows a unique path to be specified for different content types
■ Supports local folders and UNC or mapped network paths
Define Search Paths and File Locations (optional)
On the Define Search Paths and File Locations page, you can modify the
default search paths and the location of some program files. You might want
to modify the default settings for the following reasons:
■ If your environment uses a file (such as a customization file or plug-ins)
other than the default file that's installed with the program, you can point
to that file now and avoid having to add it at each workstation.
■ Some default file locations may have changed in this version of the
program. You can use this page if you have an earlier version of the
Define Search Paths and File Locations (optional) | 27
program, and you want to move the files to the same file location as your
earlier version.
To use the default program settings for search paths and file locations
■ While creating a deployment, on the Define Search Paths and File Locations
page, click Next.
To modify the default program settings for search paths and file locations
1 While creating a deployment, on the Define Search Paths and File
Locations page, in the Define Search Paths, File Names, and File Locations
list, click the plus sign (+) to the left of a search path or file location to
select and expand it.
2 Select an item in the list and do any of the following:
■ To browse to a file location, click Browse.
■ To add a new entry to the currently selected search path or file
location, click Add.
■ To remove an entry from the currently selected search path or file
location, click Remove.
■ To move a selection up or down in the list, click Move Up or Move
Down.
NOTE The availability of these buttons depends on the item that you selected
in the previous step.
28 | Chapter 2 Setting Up a Deployment
3 When you finish specifying search paths or file locations, click Next.
Install Additional Files (optional)
On the Install Additional Files page, when you click Browse, you can specify
additional files to include with a deployment. By default, these files are
installed in the program's installation directory on client workstations when
the deployment is run. You can install files to multiple directories if desired.
You can perform the following operations:
■ Specify additional files (such as drawing files, AutoLISP
files) to include with your deployment.
■ Install user files, of any format, and place them in any directory on the
client’s workstation.
■ Add subfolders under the installation folder (for example, a folder called
LSP to contain custom AutoLISP routines).
■ Add files to the same location as program files (for example, add sample
drawings for a project).
■ Add files to the root of the installation directory.
NOTE It is recommended that you install these files to a location within the
program's directory structure. You cannot install files with the same file name as
an installed program file. For example, you cannot add a file named acad.cui.
To install additional files
1 While creating a deployment, on the Install Additional Files page, set the
location where the files will be installed.
®
routines, or script
Install Additional Files (optional) | 29
2 Do any of the following:
■ Click Browse to open the Add Files dialog box, where you can select
files to add to the installation directory.
■ Click Add Folder to create a new folder in the installation directory.
■ Click Add Drive to add a drive name to the file location structure. The
drive name must be a valid drive letter and colon, for example C: or
F:. Uniform Naming Convention (UNC) paths are not supported.
■ Click Remove to delete a file, folder, or drive from the installation
directory.
3 Click Next.
Specify User Preferences (optional)
On the Specify User Preferences page, you can specify whether installations
based on this deployment can proceed if Microsoft Internet Explorer is not
30 | Chapter 2 Setting Up a Deployment
installed, specify a default profile name, choose to display the product shortcut
icon on the desktop, or create a custom desktop shortcut.
To specify user preferences settings
1 While creating a deployment, on the Specify User Preferences page, clear
the check box for the Internet Explorer option if you do not require
Microsoft Internet Explorer to be installed before AutoCAD is installed,
and select your default publishing format.
2 In the Default Profile Name box, specify a default profile name that will
be current for all users who run the deployment.
3 Clear the check box for Create an Autodesk Product Desktop Shortcut if
you do not want the product shortcut icon to appear on the user's desktop.
4 If you want to create a custom desktop shortcut, specify a shortcut name
and any parameters, such as switches that will call profiles, startup scripts,
and so on.
5 Click Next.
Include Service Packs (optional)
You have the option to include service packs for your product. You can select
to download and apply a service pack from autodesk.com, or choose to use a
locally stored (local hard drive or local network) service pack. In either case,
Include Service Packs (optional) | 31
the service pack will be applied only after the installation of the main product
is completed.
If you select the Install Service Pack from autodesk.com button, the service pack
will be automatically downloaded and you will not need to extract the MSP
file.
If you choose to include a service pack from a local or network drive, you will
need to plan how you want the service pack handled from the two options
below. You will also need to complete the following steps.
NOTE If the deployment process for the main product is canceled or fails, the
service pack installation will automatically be canceled.
■ Append the Service Packs onto the Deployment. When you append a
service pack, the service pack is applied to the current deployment only.
Multiple service packs may be appended to a deployment. The service pack
file is included in the deployment and the service pack is applied after the
product is deployed.
■ Merge the Service Packs into the Administrative Image MSI File. When
you merge a service pack, the service pack is merged into the administrative
image. Once merged, a service pack may not be removed from the
32 | Chapter 2 Setting Up a Deployment
administrative image. Multiple service packs may be included in a single
administrative image.
To extract a Microsoft Installer Patch (MSP) file from a service pack
1 Download the service pack from the AutoCAD support site.
2 Review the service pack Readme file for information about patch usage.
3 Open a Windows command prompt and enter the patch file name
followed by the /e switch and a target file name, such as:
ProductSP1.exe /e ./ProductSP1.msp
where <ProductSP1.exe> is the name of the downloaded patch and
<ProductSP1.msp> is the name of the extracted file. Using ‘./’ in front of
the extraction file name places the extracted file in the same folder as
the original executable. The “e” command line switch extracts the MSP
file from the executable.
To include a service pack with the deployment
To include a service pack with a deployment, an MSP file must be extracted
from the downloaded service pack executable.
1 On the Include Service Packs page, click the Browse button.
2 In the Open dialog box, locate the service pack you want to include with
the deployment.
3 Select the MSP file and click Open.
4 Specify whether you want to append the service pack to the deployment
or merge the service pack into the administrative image.
5 Click Next.
Configure InfoCenter Communication Center (optional)
The Communications Center is accessed through InfoCenter. Products are
updated with Live Update, which downloads patches to your product using
Communication Center. Beyond Live Update, other information channels
and feeds can be displayed by the Communication Center.
Configure InfoCenter Communication Center (optional) | 33
The Communication Center settings you can make include the following:
■ Enable Live Updates. Users can use Live Update to check for updates when
a Web connection is established. If a product patch is available, notification
of its availability is received on the program's status bar, and the patch can
be either downloaded directly from an Autodesk server or modified first
before being copied to users' workstations. If you don't want users to receive
updates or announcements, you can turn off Live Update.
NOTE You can also turn Live Update options on or off in the CAD Manager
Control utility.
■ Enable Information Channels. When active, information channels notify
users with various pieces of information such as product support
information.
■ Enable CAD Manager Channel. Controls the display of the CAD Manager
Channels in InfoCenter. Aside from being able to toggle CAD Manager
Channels, you can also define the CAD Manager feed location and set the
display name for the CAD Manager Channel.
■ Enable RSS Feeds. Users can subscribe to any number of RSS feeds. Each
feed is contained within a discrete InfoCenter category. Additionally, you
can specify whether users can add RSS feeds.
34 | Chapter 2 Setting Up a Deployment
To configure Communication Center
1 When creating a deployment, on the Configure InfoCenter
Communication Center page, make the following Live Update settings:
■ Enable Live Updates. Users can receive product updates or support
announcements from Autodesk servers.
■ Receive Live Updates from Autodesk. Users can receive product updates
and support announcements from Autodesk servers with Live Update.
■ Receive Live Updates from Local Server. You can maintain a patch
list on a local server. A patch list is an XML file that specifies a list of
patches available for installation on your computer.
If you select this option, the Local Patch List Location box is available.
Use the Browse button to locate the path to a server location where
you want a patch list. More information about how to use a local
patch list is available by installing Autodesk CAD Manager Tools 4.0,
running the CAD Manager Control utility, and then clicking Help in
the CAD Manager Control utility window.
NOTE You can name a file to use for patch information. By naming a file
and using an .npl extension now, you are creating a placeholder file, not
creating the file itself. In the location that you specify in the Local Patch
List Location box, you must create a text file with the same name you
specify here.
2 Specify whether Information channels should be enabled.
3 Specify whether CAD Manager channels should be enabled. When active,
you can make the following settings:
■ Feed Location. Defines the location of the CAD Manager channel RSS
feed. RSS feeds are in XML format.
■ Display Name. Sets the display name of the CAD Manager channel.
4 Specify whether RSS Feeds are enabled and if users are allowed to add
feeds.
5 Click Next.
Configure InfoCenter Communication Center (optional) | 35
Allow Users to Access Online Resources (optional)
On the Configure Access to Online Resources pages, you can specify whether
users can access online resources such as receiving live updates from Autodesk,
enabling information or CAD Manager channels, or subscribing to RSS feeds.
You can also allow access to the DesignCenter as well as specifying Customer
Error Reporting and InfoCenter settings.
DesignCenter
The DC Online tab in DesignCenter provides access to pre-drawn content
such as blocks, symbol libraries, manufacturers' content, and online catalogs.
This content can be used in common design applications to assist users in
creating drawings.
NOTE DesignCenter Online is not selected by default. If you choose not to enable
DC Online at the time of installation, you can enable it later from the CAD Manager
Control utility. See Can Online Resource settings be modified later? on page 83
for additional information.
Customer Error Reporting (CER)
If your Autodesk product closes unexpectedly, users have the opportunity to
send an error report directly to Autodesk, which helps Autodesk to determine
and resolve the error. You can determine whether users can also receive
notification from Autodesk when their reported errors are resolved.
36 | Chapter 2 Setting Up a Deployment
NOTE You can also turn Customer Error Reporting notification on or off in the
CAD Manager Control utility.
Configure InfoCenter Search Settings
The Search Results tab of InfoCenter can be configured to display content
from various sources, such as the product Help system, CAD Manager
Channels, or the Internet.
You can specify whether users who install from the deployment can customize
access to their InfoCenter search locations.
To configure access to online resources
1 While creating a deployment, on the Configure Access to Online Resources
page, do the following to configure DesignCenter Online:
■ To enable DesignCenter Online, select the check box next to Enable
DC Online.
2 If you want to receive notification of problem resolutions, do the
following:
■ Select the check box next to Allow Users to Receive Notification of
Resolution so that users are made aware of resolutions to issues and
can download applicable updates provided by Autodesk. This option
is enabled by default.
■ Select the check box next to Include Computer Name to include the
NOTE Users must have administrative permissions to install an update
provided by Autodesk.
user’s computer name in error reports. The computer name is included
in notifications to the user and in reports available to subscription
administrators. This option is disabled by default.
Allow Users to Access Online Resources (optional) | 37
3 Specify whether users have the option to customize their InfoCenter
search locations. This option is enabled by default.
4 Click Configuration Complete.
Choosing a Language
You can select a different language for deployment instructions, and a language
for product installations in the same deployment process.
For example, if you need to provide AutoCAD to users in one or more languages
different than your own, you can download language packs to the installer
that will allow you to deploy the product in the languages you need to support.
NOTE Language packs can only be included in an administrative image during
the creation of the deployment and not during modification.
When you start the deployment process, the Deployment wizard automatically
determines your operating system language. If a supported language is detected,
your deployment pages are displayed in that language. If you want to change
that language, you can choose a different one from the installer language list
on the opening page of the Deployment wizard.
You can also select a language for an individual product by clicking the Select
Language for Individual Products checkbox on the Select the Products to Install
page, and then selecting a language from the drop-down list.
38 | Chapter 2 Setting Up a Deployment
NOTE Some products may not have multiple languages available at the time of
product release. Additional language packs may be available later for Subscription
customers. Check http://autodesk.com/servicesandsupport for the availability of
additional language packs.
Creating a Default Deployment
If you do not plan on customizing your deployment, you can create a default
deployment.
The following procedures illustrate how quickly you can set up a default
deployment using the Deployment wizard. This procedure details a single-server
network deployment with a Typical client setup type and no customizations. For
information about setting up a configured or customized deployment, see
Creating a Configured or Customized Deployment on page 41.
To create a default deployment
1 In AutoCAD’s initial Installation page, click Create Deployments.
2 On the Begin Deployment page, you need to specify the following:
administrative image location, deployment name, and if your target
system is 32 or 64-bit.
■ In the administrative image field, enter the path to your existing
shared network location, or use the Browse button to navigate to that
location. This area is where you create and store your administrative
image. Users install the program from this location.
NOTE If you do not know how to create a network share, see Create a
Network Share on page 12.
■ In the deployment name field, enter the new deployment's name.
The name you enter here is the name of the shortcut users will access
to install the product.
■ Under This is to be a:, select either 32-bit or 64-bit for your target
operating system. This selection does not identify the system your
deployment was created on; it identifies your target system.
Click Next.
3 On the Select the Products to Include in the Deployment page, select the
products you want to include, the language(s) to include in your
Creating a Default Deployment | 39
administrative image, and the language of your deployment. After making
your choices, click Next.
NOTE Autodesk Design Review 2010 is not installed by default when you
install AutoCAD. It is recommended that you install Design Review if you
need to view DWF or DWFx files. For more information about Design Review,
see Installing Design Review.
4 Review the Autodesk software license agreement for your country or
region. You must accept this agreement to proceed with the deployment
process. Choose your country or region, click I Accept, and then click
Next.
NOTE If you do not agree to the terms of the license and want to terminate
the installation, click Cancel.
5 On the Product and User Information page, enter your serial number,
product key, and user information. Review the Privacy Policy, and then
click Next.
NOTE The information you enter here is permanent and is displayed in the
Help menu on your computer. Because you can't change this information
later without uninstalling the product, make sure you enter the information
carefully.
6 On the General Deployment Settings page, choose if you want the
deployment to create a network log and/or a client log, if you want to
run the client installation in silent mode, and if you want users to
participate in the Customer Involvement Program.
■ When you choose to create a network log file, you also have to specify
where the log file is created by entering either a valid UNC (universal
naming convention) path or hard-coded path on your network. The
network log file is optional.
NOTE The folder where the network log resides must be a shared folder
where users who install the program have Change permissions. Otherwise,
successes or failures for user installations cannot be written to the log file.
■ Choose whether you want a client log file created.
■ If you want to prevent users from changing installation settings when
they install, select Silent mode.
40 | Chapter 2 Setting Up a Deployment
■ If you choose participation in the Customer Involvement Program,
Autodesk sends helpful information about the product.
For more information regarding log files, refer to Specify Log File Locations
on page 19.
Click Next.
7 On the Review - Configure - Create Deployment page, click Create
Deployment, then select Yes to continue creating the deployment using
the default configuration.
By clicking Create Deployment, an administrative image is created in
your shared folder using the deployment options listed in the Current
Settings field. If you would like a summary of your deployment settings,
click the Copy to Clipboard button.
8 On the Deployment Complete page, click Finish.
Creating a Configured or Customized Deployment
If you plan on altering your deployment by removing features or restricting
access to online resources you can create a configured or customized
deployment.
To create a configured or customized deployment
1 In the AutoCAD Deployment wizard, click Create Deployments.
2 On the Begin Deployment page, specify the following: the administrative
image location, deployment name, and if your target system is either 32
or 64-bit.
■ In the administrative image field, enter the path to your existing
shared network location, or use the Browse button to navigate to that
location. This area is where you create and store your administrative
image. Users install the program from this location.
NOTE If you do not know how to create a network share, see Create a
Network Share on page 12.
■ In the deployment name field, enter the new deployment's name.
The name you enter here is the name of the shortcut users will access
to install the product.
Creating a Configured or Customized Deployment | 41
■ Under This is to be a:, select either 32-bit or 64-bit for your target
operating system. This selection does not identify the system your
deployment was created on; it identifies your target system.
Click Next.
3 On the Select the Products to Include in the Deployment page, select the
products you want to include, the language(s) to include in your
administrative image, and the language of your deployment. After making
your choices, click Next.
NOTE Autodesk Design Review 2010 is not installed by default when you
install AutoCAD. It is recommended that you install Design Review if you
need to view DWF or DWFx files. For more information about Design Review,
see Installing Design Review.
4 Review the Autodesk software license agreement for your country or
region. You must accept this agreement to proceed with the installation.
Choose your country or region, click I Accept, and then click Next.
NOTE If you do not agree to the terms of the license and want to terminate
the installation, click Cancel.
5 On the Product and User Information page, enter your serial number,
product key, user information. Review the Privacy Policy, and then click
Next.
NOTE The information you enter here is permanent and is displayed in the
Help menu on your computer. Because you can't change this information
later without uninstalling the product, make sure you enter the information
carefully.
6 On the General Deployment Settings page, choose if you want the
deployment to create a network log and/or a client log, if you want to
run the client installation in silent mode, and if you want users to
participate in the Customer Involvement Program.
■ When you choose to create a network log file, you also have to specify
where the log file is created by entering either a valid UNC (universal
naming convention) path or hard-coded path on your network. The
network log file is optional.
42 | Chapter 2 Setting Up a Deployment
NOTE The folder where the network log resides must be a shared folder
where users who install the program have Change permissions. Otherwise,
successes or failures for user installations cannot be written to the log file.
■ Choose whether you want a client log file created.
■ If you want to prevent users from changing installation settings when
they install, select Silent mode.
■ If you choose participation in the Customer Involvement Program,
Autodesk sends helpful information about the product.
For more information regarding log files, refer to Specify Log File Locations
on page 19.
Click Next.
7 On the Review - Configure - Create Deployments page, click the Configure
button to make changes to the administrative image.
8 On the Select the License Type page, select a Stand-alone or Network
license installation, and then click Next.
9 On the Select the Installation Type page, you can choose to make the
following configuration changes:
■ Typical - Installs the most common application features.
■ Custom - Installs only the application features that you select from
the Select Features To Install list
CAD Standards
Drawing Encryption
Express Tools
Creating a Configured or Customized Deployment | 43
Contains tools for reviewing design files for compliance with
your standards.
Contains database access tools.Database
Contains multi-language dictionaries.Dictionaries
Allows you to use the Security Options dialog box to protect
a drawing with a password.
Contains AutoCAD support tools and utilities (not supported
by Autodesk).
Contains AutoCAD fonts and TrueType fonts.Fonts
Autodesk Impression
Toolbar
The Impression toolbar allows you to quickly export any view
to Autodesk Impression for advanced line effects.
Autodesk Seek
Material Library
New Features Workshop
License Transfer Utility
Migrate Custom Settings
Initial Setup
Reference Manager
Autodesk Seek.
NOTE Seek will only be installed in the English version
of AutoCAD.
The Material Library contains over 300 professionally built
materials to apply to your model.
Contains animated demos, exercises, and sample files to help
users learn the new features.
Allows users to transfer an Autodesk product license between
computers.
NOTE The utility will not be installed on unlocked versions of AutoCAD.
Migrates custom settings and files from previous version of
your product to this version.
Allows users to set up their initial configuration of AutoCAD
(online content, workspaces) based on their units system, industry, and commonly used task-based tools.
Allows users to view and edit the paths of externally referenced
files associated with a drawing.
■ Product Install Path - Specifies the drive and location where Autodesk
product will be installed.
Click Next to proceed with the configuration process.
44 | Chapter 2 Setting Up a Deployment
Contains various feature sample files.Samples
Contains tutorials.Tutorials
Contains Microsoft Visual Basic for Applications support files.VBA Support
10 On the Select Installation Folders for Support Content page, choose the
location where your support content will reside. For more information
about support file locations and options, see Select Installation Folders
for Support Content on page 25. Click Next.
11 Define search paths, file names, and file locations on the Define Search
Paths and File Locations page, and then click Next.
WARNING Do not remove the DRV path and always add paths as secondary
paths.
12 To include additional files in the deployment, select the location where
the files will be installed, then select the file names that you want included
on the Install Additional Files page. After making your selections, click
Next.
13 On the Specify User Preferences page, decide if the Internet Explorer
browser is required, set the default publish format, the default profile
name, and whether or not you want a desktop shortcut. Click Next.
14 On the Include Service Packs page, if service packs are available for your
product, you can select to include them.
The installer automatically checks autodesk.com for available updates. If
updates are available, a link is displayed. If no updates are available a link
is not displayed.
15 On the Configure InfoCenter Communications Center page, you choose
to allow users access to the latest information and product discussions
by enabling live updates from Autodesk, Information and CAD Manager
channels, and RSS feeds. After making your choices, click Next.
16 On the Configure Access to Online Resources page, you can set up users
access to online tools such as DesignCenter, Customer Error Reporting,
and InfoCenter searches. Make your selections, and then click Next.
17 On the Configuration Complete page, you can select a product tab to
configure another product, or click Configuration Complete to review
your choices.
18 On the Review - Configure - Create Deployment page, click Create
Deployment. If you want a summary of your deployment settings, click
the Copy to Clipboard button.
19 On the Deployment Complete page, click Finish.
Creating a Configured or Customized Deployment | 45
Final Review and Complete Setup
To complete your deployment setup, confirm the settings you selected.
1 On the Review - Configure - Create Deployments page, scroll the list of
current settings and verify your installation selections.
2 Click the Configure button if you need to change any selections.
3 Click the Copy to Clipboard button if you want a copy of the installation
information.
4 Click Create Deployment.
5 On the Deployment Complete page, click Finish.
You have created an Autodesk product deployment with precise options that
are specific to your group of users. You can now use this deployment to install
the program.
Modify a Deployment (optional)
After a deployment is created, it may be necessary to modify the deployment
for some client workstations. You can apply a patch or select various custom
files that are not part of the base administrative image. You can also perform
modifications such as changing the installation directory from drive C to drive
D.
To modify a deployment
1 Open the shared network folder where you originally chose to place your
product deployment.
2 In the Tools folder, double-click the Create & Modify a Deployment
shortcut.
This re-opens the Deployment wizard.
3 Click through the deployment pages and make the necessary changes.
4 After all the modifications have been made, click Create Deployment.
46 | Chapter 2 Setting Up a Deployment
Point Users to the Administrative Image
When you have completed the deployment process, you are ready to have
users install the newly created or modified deployment. You need to notify
your users of the shortcut that was created in the administrative image. The
shortcut is the same name that you chose in Creating a Default Deployment
on page 39.
To point users to the administrative image
■ The simplest method of notifying users how to install the deployment is
to email them with instructions about using the shortcut. At a minimum,
the instructions need to include the location of the deployment and
instructions about double-clicking the shortcut to the deployment.
Uninstall an Autodesk Product
When you uninstall an Autodesk product, all components are removed. This
means that even if you've previously added or removed components, or if
you've reinstalled or repaired an Autodesk product, the uninstall removes all
Autodesk product installation files from your system.
To uninstall an Autodesk product
1 Do one of the following:
■ (Windows XP) Click Start menu ➤ Settings ➤ Control Panel ➤
Add or Remove Programs.
■ (Windows Vista) Click Start menu ➤ Control Panel ➤ Programs
and Features ➤ Uninstall or change a program.
2 In the Add or Remove Programs or Uninstall or Change a Program
window, select AutoCAD, and then click Change/Remove or
Uninstall/Change.
3 Click Uninstall.
4 On the Uninstall <Autodesk product> page, click Next to remove AutoCAD
from the system.
5 When informed that the product has been successfully uninstalled, click
Finish.
Point Users to the Administrative Image | 47
NOTE Even though AutoCAD is removed from your system, the software license
remains. If you reinstall AutoCAD at some future time, you will not have to register
and re-activate the program.
48 | Chapter 2 Setting Up a Deployment
Use Scripts to Deploy the
Program
A script executes a command or a set of commands. Scripts are similar to batch files but are
more flexible. Installation scripts are most useful for stand-alone installation of programs on
computers that are connected to a network. Scripts are also useful for installing service packs,
extensions, and object enablers on a network.
In order for AutoCAD to run properly, the following software and prerequisites must be
installed and met on the computer where the program is being installed:
■ Microsoft .NET 3.5 SP1 (available on the product disc)
■ Microsoft Internet Explorer version 6.0 Service Pack 1 or later (You can download Microsoft
Internet Explorer from the Microsoft website by visiting www.microsoft.com).
■ Microsoft Installer Package (MSI) 4.5
■ Microsoft Windows Media Format 9.5 (prerequisite for 64-bit)
■ Macromedia Flash Player 9.0 or later (not installed by default)
■ Autodesk Design Review 2010 (not installed by default)
A
■ VC++ 2008 SP1 and VC++2005 SP1 runtimes for x86 operating systems; and VC++2008
SP1 and VC++2005 SP1 runtimes for x64 for 64-bit operating systems (available on the
product disc)
■ Microsoft National Language Support Downlevel APIs (available on the product disc)
Create Scripts That Install Programs
You create a script by using a text editor such as Notepad and then saving it in
ASCII format in a file with the file extension .vbs. The script consists of one or
49
more commands, as well as command switches that specify options, and flags
that modify the options. An installation script also contains path names.
An installation script points to the location of the product's setup.exe file. You
must point to the setup.exe file on your product disc. For example:
Autodesk product CDROM1\setup.exe
A Sample Installation Script
The sample script in this section installs the program in a typical configuration.
To make it easy to copy this sample script and substitute your own information,
the same names are used throughout for variable items. The log file name is
based on the product being installed. You can either use the log file name in
the script or change it to something else.
Serial number prefix: 123
Serial number: 12345678
First name: My First Name
Last name: My Last Name
Organization: Organization
A sample script for a silent installation of this program uses the syntax shown
in this section.
Scripted installation for the AutoCAD
' Scripted installation for AutoCAD 2010 - English
option explicit
'
50 | Appendix A Use Scripts to Deploy the Program
' Create variables
dim shell
dim productType
dim strADSKFirstName
dim strADSKLastName
dim strADSKOrganization
dim strADSKSNPrefix
dim strADSKSNNumber
dim strADSKProdKey
dim strLocale
dim strACADStandaloneNetworkType
dim strADSKLicenseServerType
dim strADSKLicenseType
dim strADSKServerName
dim strADSKServerPath
dim strADSKServerHostID
dim strADSKPath
dim strSourcePath
'
' Script initialization
Set shell = CreateObject("WScript.Shell")
productType = "ACAD"
'
' Name and Organization information
strADSKFirstName = "My First Name"
strADSKLastName = "My Last Name"
strADSKOrganization = "Organization"
'
' Serial Number information
strADSKSNPrefix = "123"
strADSKSNNumber = "12345678"
strADSKProdKey="ABCDE"
'Locale information, for example en-US = US English, de-DE =
Deutchland German, ja-JP = Japan Japanese
strLocale="" ' en-US, de-DE, ja-JP
A Sample Installation Script | 51
'
' Source to install from (e.g. D: is assumed to be Install Media)
The following table lists all of the switches and flags that are relevant to
installation.
NOTE You must set the installation switch to INSTALLDIR=. If this is not done,
programs that run outside AutoCAD (such as the License Transfer utility) are not
installed.
Switches in Installation Scripts
DescriptionSwitch
Specifies the location to install the product.INSTALLDIR=
ACADSERIALPREFIX=
ADLM_PRODKEY=
User Interface Flags
Run Scripts
After creating a script, you move it to a server or use a mapped drive letter or
a UNC (universal naming convention) path. If you place it on a server for
users to run, create a share on the server, and then add users to the share with
Specifies the numbers that precede the hyphen
in the serial number.
Specifies the serial number.ACADSERIALNUMBER=
Specifies the type of installation: 3=TypicalINSTALLLEVEL=
Specifies the first name personalization.ACADFIRSTNAME=
Specifies the last name personalization.ACADLASTNAME=
Specifies the company name.ACADORGANIZATION=
Specifies the product key (found on the same label
as the serial number).
DescriptionFlag
Designates that the installation is performed in silent mode.q
54 | Appendix A Use Scripts to Deploy the Program
the rights they need. Because all that users need to do is run the script, provide
read-only access to the share directory.
Next (on the same server or on a different server), create a directory for each
product you want to install. Choose a location for this directory that won't
be changed so that you can point to the MSI files in your scripts. Copy the
product disc(s) to that directory. You may also want to create directories for
service packs, extensions, and your own customization tools.
You can use any of the following methods to run an installation script:
■ Run the script manually at each individual workstation. To run the
installation, paste the script into the Run dialog box or run it from the
Windows command prompt.
■ Send an email with the UNC path to each user who should run the script.
To run the script, the user follows your instructions.
■ Email the script to each user with instructions for use.
■ Set up the script so that it runs on login.
Run Scripts | 55
56
Use Group Policies to
Install a Deployment
With group policies, you can advertise this program by assigning the deployment to computers.
■ Microsoft .NET 3.5 SP1 (available on the product disc)
■ Microsoft Internet Explorer version 6.0 Service Pack 1 or later (You can download Microsoft
Internet Explorer from the Microsoft website by visiting www.microsoft.com).
■ Microsoft Installer Package (MSI) 4.5
■ Microsoft Windows Media Format 9.5 (prerequisite for 64-bit)
■ Macromedia Flash Player 9.0 or later (not installed by default)
■ Autodesk Design Review 2010 (not installed by default)
■ VC++ 2008 SP1 and VC++2005 SP1 runtimes for x86 operating systems; and VC++2008
SP1 and VC++2005 SP1 runtimes for x64 for 64-bit operating systems (available on the
product disc)
■ Microsoft National Language Support Downlevel APIs (available on the product disc)
B
Introduction
With group policy objects, this program can be advertised to any computer that
meets the minimum requirements for the product, that is part of Windows
2000, Windows 2003, and Windows 2008 Server Active Directory environments.
57
Assign a Deployment Using Group Policies
Assign a deployment that was created during the deployment process by the
Deployment wizard to a computer. Assigning a deployment to a computer
installs the program the next time the computer is restarted.
A deployment that is assigned to a computer can be used by any user of that
computer. Generally, you should assign the program to a computer if the
computer is used by a large number of users.
NOTE Autodesk products are designed to be installed on a computer so that any
user who logs on to the computer can run the software. If you attempt to assign
this program for a specific user rather than a computer, you may encounter
problems when a second specified user tries to install or uninstall a copy of the
program.
Advantages and Disadvantages of Using Group Policies
The following table outlines the advantages and disadvantages of using group
policies.
Advantages and disadvantages of group policies
DisadvantageAdvantage
■ Works well with the deployment
functionality of the Deployment
wizard.
■ Easy to add custom files through
the deployment functionality of
the Deployment wizard.
■ Deployed to workstation.
■ Simple to implement.
■ Cannot pass command-line parameters to
MSI executable. The solution is to use
scripts.
■ Cannot customize application settings
other than what is set while creating a
deployment with the Deployment wizard.
Distribute a Deployment Through Group Policies
There are three main steps to distributing this program through group policies.
58 | Appendix B Use Group Policies to Install a Deployment
1 Create an application distribution share point. The application
distribution share point is created using the Deployment wizard. Follow
the steps outlined in Creating a Default Deployment on page 39 or
Creating a Configured or Customized Deployment on page 41 to create
a deployment.
2 Assign the program to a computer.
3 Verify the installation. Make sure that the program has been correctly
installed.
Assign a Deployment to Computers
When the program is assigned to a computer, it is available to all users of the
computer. The following procedures must be run from the server that has
access to the Windows 2003 Server, Windows XP, or Windows 2000 Active
Directory for assigning this program to computers.
NOTE This documentation assumes that you have the Group Policy Management
Console installed.
To assign a deployment to a computer
1 Launch the Group Policy Management Console (gpmc.msc).
2 Right-click the organizational unit where you want to create the group
policy object. Then select Create and Link a GPO Here and name the
Group Policy.
3 In the Group Policy Object Editor window, under Computer
Configuration, click the plus sign (+) next to the Software Settings folder
to expand it.
4 Under Software Settings, right-click Software Installation, and then click
Properties.
5 In the Software Installation Properties dialog box, on the General tab,
click Browse.
6 In the Browse for Folder dialog box, locate the application distribution
share point created in the Deployment wizard, and select the AdminImage
folder. Then click OK.
The Software Installation Properties dialog box displays (in UNC format)
the default package location, the server name, the shared folder that you
selected, and AdminImage. For example:
■ For Windows 2003 Active Directory: On the General tab, under New
Packages, click Advanced to specify a method to be used when a new
package is created. This method also allows the transform file created
by the Deployment wizard to be selected.
■ For Windows 2000 Active Directory: On the General tab, under New
Packages, click Advanced Published or Assigned to specify a method
to be used when a new package is created. This method also allows
the transform file created by the Deployment wizard to be selected.
8 Click OK to close the Software Installation Properties dialog box.
9 Do one of the following:
■ For Windows 2003 Active Directory: In the Group Policy Object Editor
dialog box, under Software Settings, right-click Software Installation,
and click New ➤ Package.
■ For Windows 2000 Active Directory: In the Group Policy dialog box,
under Software Settings, right-click Software Installation, and click New
➤ Package.
10 In the Open dialog box, make sure the Windows Installer Packages file
(acad-<deplolyment name>-for-GPO.msi) is selected, and click Open.
If you created the administrative image in a location different from the
application distribution share point, find the administrative image
location, and click acad-<deployment name>-for-GPO.msi. Substituting
<deployment name> for the name of the deployment used as the basis for
this GPO package.
11 In the <product name> Properties dialog box, click the Deployment tab.
Under Deployment Type, verify that Assigned is selected.
12 On the Modifications tab, click Add.
13 In the Open dialog box, click the transform package file (acad-<deployment
name.mst) created by the Deployment wizard, and then click Open.
If you created the administrative image in a location different from the
application distribution share point, find the administrative image
location and select the transform package file (acad-<deployment name.mst).
60 | Appendix B Use Group Policies to Install a Deployment
14 In the <product name> Properties dialog box, on the Modifications tab,
the transform package you selected is added to the Modifications list.
Repeat the process of adding the transform package, but this time, add
in the gpo.mst transform in the <deployment location>\Tools folder. Click
OK.
NOTE You must select the transform package file created by the Deployment
wizard when you created the group policy object. You cannot add or remove
transform package files after the group policy object has been created. If you
fail to select the transform package files, the program cannot be installed on
the client computer.
This must be repeated for the language pack which is located at
\\server123\Deployment\AdminImage\x86\acad\en-US\AcadLP.msi. For x64
deployments the path would be
\\server123\Deployment\AdminImage\x64\acad\en-US\AcadLP.msi.)
For example, if the deployment for a US English 32-bit product is stored
at \\server123\Deployment and the deployment name was MyDeployment.
Then you would create the GPO software package with the following:
■ For Windows 2003 Active Directory: In the Group Policy Object Editor
■ For Windows 2000 Active Directory: In the Group Policy window,
window, under Computer Configuration, click Software Installation.
The newly created program package is displayed in the right pane.
under Computer Configuration, click Software Installation. The newly
created program package is displayed in the right pane.
Assign a Deployment to Computers | 61
16 Do one of the following:
■ For Windows 2003 Active Directory: Close the Group Policy Object
Editor window and any other open Active Directory windows.
■ For Windows 2000 Active Directory: Close the Group Policy window
and any other open Active Directory windows.
This program is assigned to all computers that are members of the
organizational unit for which the group policy object has been created. The
next time a computer in the organizational unit is restarted, the program will
be installed and will be available for all users of the computer. See Verify the
Installation of a Deployment on page 62 to validate that the group policy has
been created correctly.
Verify the Installation of a Deployment
As a computer is restarted, the operating system displays messages about group
policy, generally just before or after the Windows Login dialog box is displayed.
These messages include the following:
■ Windows starting up
■ Applying computer settings
■ Installing managed software <application>
■ Applying software installation settings
■ Loading your personal settings
■ Applying your personal settings
From a Windows XP or Windows 2000 workstation, users log in under the
organizational unit or computer for which the group policy has been created.
NOTE If problems arise, an entry is logged in the system's Event Viewer under
Applications.
Verify That the Program Is Assigned to a Computer
To verify that this program has been correctly assigned to a computer, restart
a computer that is in the organizational unit for which the group policy was
created. The program is installed before the login prompt is displayed. After
62 | Appendix B Use Group Policies to Install a Deployment
logging in, double-click the program icon on the desktop. A second-time
installation begins. At the completion of the installation, the program starts.
Verify That the Program Is Assigned to a Computer | 63
64
Use Microsoft System
Center Configuration
C
Manager to Install a
Deployment
The following information provides details for deploying Autodesk software using Microsoft
System Center Configuration Manager (SCCM). SCCM allows you to manage software
distribution to selected target systems through a remote process.
Introduction
To deploy Autodesk software, you should be familiar with the SCCM/SMS
software distribution process. For more information about this topic, consult
your Microsoft SCCM documentation and support resources.
®
Tasks for Deploying Autodesk Software with SCCM
To deploy Autodesk software with SCCM, it is recommended that you complete
the following:
■ Identify or create a collection of target systems to receive the software package
■ Create a source directory using the Deployment wizard
■ Create a SCCM package to deploy to your target systems
■ Provide the path for the source files
65
■ Distribute the SCCM package to the distribution points
■ Create an advertisement to notify users of the availability of the software
package
Set Up a Source Directory Using the Deployment
Wizard
When you use SCCM to deploy Autodesk software, you set up the source
directory using the Deployment wizard.
The Deployment wizard creates an administrative image that is used by SCCM
to distribute the Autodesk software to the target systems. The location where
you perform the administrative installation becomes the location of the
package source directory.
To learn more about deployments and setting up the source directory for
Autodesk software, see the following topics in the Network Administrator’s Guide:
■ Deployment Preparation on page 1
■ Preliminary Tasks for a Network Deployment on page 15
■ Creating a Default Deployment on page 39
■ Creating a Configured or Customized Deployment on page 41
■ Modify a Deployment (optional) on page 46
NOTE It is recommended that you test the deployment created by the Deployment
wizard before trying to configure SCCM to deploy the program to ensure that
there are no problems with the administrative image and deployment.
To test the Deployment wizard deployment
1 Log on to a Windows XP Professional or Vista workstation as a user who
has administrative privileges.
2 Navigate to the source directory where your deployment was created.
3 Double-click the deployment shortcut created by the Deployment wizard.
The program will either be installed or error information will be written
to the log file at %temp%.
66 | Appendix C Use Microsoft System Center Configuration Manager to Install a Deployment
Create the SCCM Software Installation Package
After creating the source directory using the Deployment wizard, you create
the SCCM software installation package. An SCCM package contains the files
and instructions that SCCM uses to distribute the software and advertise the
package. The Deployment wizard creates the files and instructions, but SCCM
must be configured to use these files.
To create a software installation package using SCCM
1 Do one of the following:
■ (Windows XP or Windows Vista) Click Start menu ➤ All Programs
➤ Microsoft System Center➤ Configuration Manager 2007 ➤
ConfigMgr Console.
2 In the Configuration Manager Console window, expand Software
Distribution.
3 Right-click Packages ➤ Distribute ➤ Software.
4 In the Distribute Software wizard, click Next.
5 In the Package dialog box, select Create a New Package and Program
without a Definition File. Click Next.
6 In the Package Identification dialog box, enter the information for Name,
Version, Publisher, Language and any comments. Click Next.
7 In the Source Files dialog box, make selections to where SCCM retrieves
the files and how it manages them. Click Next.
NOTE In this procedure, “Always Obtain Files from a Source Directory” was
selected.
8 In the Source Directory dialog box, specify the directory where the source
files are stored. Click Next.
9 In the Distribution Points dialog box, select the distribution point(s).
This is the location from which the software package will be deployed to
the target systems. Click Next.
10 In the Program Identification dialog box, enter the name of your program.
This is the name that displays in Add or Remove Programs in the Control
Panel. In the Command Line field, enter AdminImage\setup.exe /W /Q/I AdminImage\<deployment name>.ini /Lang en-US. In this case, our
deployment is named AutoCAD 2010, so you would enter
Create the SCCM Software Installation Package | 67
NOTE The example above assumes the language pack you wish to install is
US English. /W is the flag for SMS and SCCM, /Q is the silent install, /I
indicates this is a deployment installation.
11 In the Program Properties dialog box, Program Can Run drop-down list,
select how you want your program to install. Your choices are:
■ Only When a User is Logged On
■ Whether or Not a User is Logged On
■ Only When No User is Logged On
12 In the After Running drop-down list, select an action to take after the
program has deployed. Your choices are
■ No Action Required
■ Program Restarts Computer
■ ConfigMgr Restarts Computer
■ ConfigMgr Logs User Off
NOTE AutoCAD requires you to restart your system after installation.
Click Next.
13 In the Advertise Program dialog box, select Yes to advertise the program.
Click Next.
14 In the Select a Program to Advertise dialog box, select the package you
want to advertise. Click Next.
15 In the Select Program ➤ Advertisement Target dialog box, select the
collection to which you want to advertise, or create a new collection.
16 In the Select Program ➤ Advertisement Name dialog box, enter or change
the name of your advertisement. Add any comments to further describe
the advertisement. Click Next.
17 In the Select Program ➤ Advertisement Subcollection dialog box, select
one of the following options:
■ Advertise this Program to an Existing Collection
68 | Appendix C Use Microsoft System Center Configuration Manager to Install a Deployment
■ Create a New Collection and Advertise this Program to It
18 Click Next.
19 In the Select Program ➤ Advertisement Schedule dialog box, if desired,
set options to advertise your program at a specific date and time, or set
an expiration date. Click Next.
20 In the Select Program ➤ Assign Program dialog box, select one of the
following options:
■ If the installation process is mandatory, select Yes, Assign the Program.
■ If the installation process is optional, select No, Do Not Assign the
Program.
Click Next.
21 In the Summary dialog box, verify your advertisement information. Use
the back buttons to make any changes. To finish, click Next.
Create the SCCM Software Installation Package | 69
70
Distribute the Product
Using Imaging Software
The following information is provided for those who use imaging software, such as Norton
Ghost, to create a master image to distribute Autodesk products. Once created, the master
image is then replicated to other computers throughout your facility.
Care needs to be taken since the use of imaging software can result in the following situations:
■ Conflicts with the product licensing
■ Incomplete installations and problems with activation
D
Use a Master Image to Distribute Multi-Seat
Stand-Alone Products to Multiple Systems
You can distribute the product using a master image for a multi-seat stand-alone
product.
NOTE When using Norton Ghost, you must use the -ib switch to include the boot
sector in your master image. Consult your imaging software for more details on
including the boot sector as part of the master image.
Master images should not be created if you’ve previously run Autodesk products
on the master computer. Cleaning the system may be necessary.
71
To distribute a multi-seat stand-alone product to multiple computers using
a master image
1 Create a network deployment for a multi-seat stand-alone product. For
more information, see Creating a Configured or Customized Deployment
on page 41.
2 Install AutoCAD from the deployment onto the master computer.
3 Do one of the following on the master computer:
■ Create a master image, including the boot sector. Test the product on
a machine other than the master computer before distributing the
product. Launch the product on the other machine, and register and
activate it. Users have a 30-day grace period to register and activate
the product on their machines.
■ Launch and customize the product as necessary. Create a master image
and distribute it to users. If users’ computers are connected to the
Internet, the product is automatically activated. Users whose
computers are not connected to the Internet have a 7-day grace period
to register and activate the product.
4 Apply the master image to the target computers.
Use a Master Image to Distribute Network
Licensed Products to Multiple Systems
You can distribute the product using a master image for a network licensed
product.
To distribute a network licensed product to multiple computers using a
master image
1 Create a network deployment for a network licensed product. For more
information, see Creating a Configured or Customized Deployment on
page 41.
2 Install AutoCAD from the deployment onto the master computer.
NOTE A license server must be running, and each computer must be
connected to the network in order for the product to obtain a license.
72 | Appendix D Distribute the Product Using Imaging Software
3 After AutoCAD has been installed, use imaging software to create a master
image of the system's hard drive.
4 Apply the master image to the target computers.
Restore the Master Image
The following procedure assumes that you have saved a copy of each
workstation’s AdLM folder (and Product Licenses folder, if present) to either
another workstation or a disc before you reformat the workstation.
To restore a product using a master image
1 Exit the application. Do not run the application again until after you
have completed this procedure.
2 In Windows Explorer, copy the AdLM folder from the appropriate path
shown below to a location other than the disc that will be restored.
C:\Documents and Settings\All Users\Application Data\FLEXnet
3 Reformat the workstation and restore the master image.
NOTE Do not perform a low-level format of the hard drive.
4 Copy the AdLM folder that you created in step 2 to its original workstation
and location on that workstation.
NOTE When you restore the disc image, any files that were altered are put back
in their original state and ready to use again. The license files are preserved, and
no reactivation of products is necessary.
Clean a Master System and Restore the Operating
System
If you have already run AutoCAD on the master computer, the master
computer should be properly cleaned first.
To clean a master computer and restore the operating system
1 Clean the hard drive, including the boot sector.
Restore the Master Image | 73
For example, if you use Norton’s GDISK utility, use the following
command:
gdisk 1 /diskwipe
Where 1 is the hard disk that is being wiped.
NOTE If you use a utility other than Norton Ghost, make sure that it cleans
the boot sector; otherwise, you will not be able to activate Autodesk products.
2 Create a new partition and use the restore disc or product disc to install
the operating system.
74 | Appendix D Distribute the Product Using Imaging Software
Installation
Troubleshooting
This section provides solutions to installation issues and answers to commonly asked questions
that may arise while installing your product(s). Additional troubleshooting information and
support is also available at http://autodesk.com/servicesandsupport
E
General Installation Issues
This section outlines common issues and their solutions that may arise while
performing a general install of your product(s).
How can I check my graphics card driver to see if it needs
to be updated?
It is recommended that you verify and update your graphics card driver to
optimize your program. Use the following procedure to identify your current
graphics card driver.
To identify your graphics card driver
1 Start AutoCAD.
2 At the command line, enter 3dconfig.
3 In the Adaptive Degradation and Performance Tuning dialog box, click
View Tune Log.
4 Review the 3D Device section for information about your system's graphics
card driver and driver version.
75
TIP Many newer graphic cards offer tabbed pages where you can learn more
precise information about your specific graphic card. If specific tab pages are
present, refer to them instead of the Adapter tab.
What is the text editor used for?
The text editor you designate during installation is used for editing text files
such as PGP and CUS dictionary files while you are running your product.
When performing a Typical installation, what gets
installed?
A Typical installation includes the following features:
CAD Standards
Drawing Encryption
Express Tools
Autodesk Impression
Toolbar
Autodesk Seek
New Features Workshop
Contains tools for reviewing design files for compliance with
your standards.
Contains database access tools.Database
Contains multi-language dictionaries.Dictionaries
Allows you to use the Security Options dialog box to protect
a drawing with a password.
Contains AutoCAD support tools and utilities (not supported
by Autodesk).
Contains AutoCAD fonts and TrueType fonts.Fonts
The Impression toolbar allows you to quickly export any view
to Autodesk Impression for advanced line effects.
Autodesk Seek.
NOTE Seek will only be installed in the English version of
AutoCAD.
Contains animated demos, exercises, and sample files to help
users learn the new features.
76 | Appendix E Installation Troubleshooting
License Transfer Utility
Allows users to transfer an Autodesk product license between
computers.
NOTE The utility will not be installed on unlocked versions of
AutoCAD.
Migrate Custom Settings
Initial Setup
Reference Manager
Migrates custom settings and files from previous version of
your product to this version.
Allows users to set up their initial configuration of AutoCAD
(online content, workspaces) based on their units system, industry, and commonly used task-based tools.
Allows users to view and edit the paths of externally referenced
files associated with a drawing.
Contains various feature sample files.Samples
Contains Microsoft Visual Basic for Applications support files.VBA Support
Why should I install the Material Library?
The Material Library contains more than 300 professionally made materials
that you can immediately apply to objects in your model. They can also act
as a basis for custom materials that you want to create.
For more information regarding materials, see Materials and Textures in the
AutoCAD User’s Guide.
Where are my product manuals?
Documentation for Autodesk products are available in two formats: PDF files
and CHM files.
■ PDF files are made available during installation; click the Read the
Documentation button on the initial installation page, or select the
Documentation link located on each install page. You need Adobe® Reader
to view PDFs. To download the Reader free of charge, visit www.adobe.com.
■ CHM files are available after the product is installed; they are accessed in
the Help system in the product.
Why should I install the Material Library? | 77
®
For late-breaking information see the product’s Readme file, on the product
disc. The Readme is also available from the Installation Complete page, or
through the Help system.
Deployment Issues
This section outlines common issues and their solutions with regards to
software deployments.
Is there a checklist I can refer to when performing a
deployment?
The Network Administrator Guide contains a complete section that describes
preliminary actions and the entire deployment process. See Preliminary Tasks
for a Network Deployment on page 15.
Where should deployments be located?
Shared folders are required for both network license and multi-seat stand-alone
methods of installation. The shared folder (network share) is created before you
run the Installation wizard and is where product deployments are stored.
It is recommended that you name the network share folder Deployments on
the desktop of the system where you want deployments stored. You can then
add subfolders inside the shared Deployments folder that clearly convey the
names of products you plan to deploy. For example, any subfolders that are
placed inside a shared folder are automatically shared.
TIP You must have Full Control permissions set for your shared folder when you
are creating your deployment images. Read permissions are necessary to access
the network share and administrative permissions on the workstation where the
program is deployed.
What are the default search paths and file location
settings?
On the Select Installation Folders for Support Content page of the Deployment
wizard, you can choose where your support content gets installed by specifying
78 | Appendix E Installation Troubleshooting
a folder other than the user profile folder. Support files include drivers, menus,
and optional, user-defined settings such as dictionary and customization files.
When an install path for support content is specified, it will be populated into
the corresponding search paths on the Define Search Paths and File Locations
page.
Support File Search
Path
FilesCustom Dictionary File:
PathPrinter Configuration Search Path:
Specifies the folders in which the program should look for text
fonts, customization files, plug-ins, drawings to insert, linetypes,
and hatch patterns that are not in the current folder.
Specifies the names and locations of various types of files.Customization Files
Main Customization File:
Specifies the default location of the main customization file
(acad.cui).
Enterprise Customization File:
Specifies the location of an enterprise customization file.
Custom Icon Location:
Specifies the location for custom icons used in customization
files.
Specifies a number of optional settings.Dictionary and Font
Specifies a custom dictionary to use (if you have one).
Alternate Font File:
Specifies the location of the font file to use if the original font
cannot be located and an alternate font is not specified in the
font mapping file.
Font Mapping File:
Specifies the location of the file that defines how to convert
fonts that cannot be found.
Specifies search path settings for printer support files.Printer Support File
Specifies the path for printer configuration files (PC3 files).
Printer Description File Search Path:
Specifies the path for files with a .pmp file extension, or printer
description files.
Plot Style Table Search Path:
Specifies the path for files with an .stb or .ctb extension, or plot
style table files (both named plot style tables and color-dependent plot style tables).
What are the default search paths and file location settings? | 79
Automatic Save File
Location
Specifies the path for the file created when you select Automatic Save on the Open and Save tab.
Color Book Locations
Data Sources Location
tions
Specifies the path for color book files that can be used when
specifying colors in the Select Color dialog box. You can define
multiple folders for each path specified. This option is saved
with the user profile.
Specifies the path for database source files. Changes to this
setting do not take effect until you close and restart the program.
Specifies the drawing template settings.Template Settings
Drawing Template File Location:
Specifies the path to locate drawing template files used by the
Start Up wizard and New dialog box.
Sheet Set Template File Location:
Specifies the path to locate sheet set template files used by the
Create Sheet Set wizard.
Default Template File Name for QNEW:
Specifies the drawing template file used by the QNEW command.
Default Template for Sheet Creation and Page Setup
Overrides:
Specifies the default template file that is used for creating new
sheets and for storing page setup overrides that can be applied
to Publish operations from the Sheet Set Manager.
Specifies the path for tool palette support files.Tool Palette File Loca-
Log File Locations
Plot and Publish Log
File Location
Temporary Drawing
File Location
Specifies the path for the log file created when you select
Maintain a Log File on the Open and Save tab.
Specifies the path for the log file that is created if you select
the Automatically Save Plot and Publish Log option on the Plot
and Publish tab of the OPTION command.
Specifies the location to store temporary files. This program
creates temporary files and then deletes them when you exit
the program. If you plan to run the program from a writeprotected folder (for example, if you are working on a network
or opening files from a disc), specify an alternate location for
80 | Appendix E Installation Troubleshooting
your temporary files. The folder you specify must not be writeprotected.
Temporary External
Reference File Location
Path
i-drop Associated File
Location
Specifies the location of external reference (xref) files. This
location is used for the copy of the xref when you select Enabled with Copy in the Demand Load Xrefs list on the Open
and Save tab.
Specifies the folders to search for rendering texture maps.Texture Maps Search
Specifies the location of data files associated with i-drop content. When the location is not specified, the location of the
current drawing file is used.
How will changing the support file locations affect my
search paths?
When a different install path for support content is specified, it will be
populated into the correspondent search paths on the Define Search Paths
and File Locations page. If one is not specified, the first search path will replace
the install path. The table below outlines the specific search paths that can
be affected by resetting your support file install paths.
Drawing template file location
Sheet Set template file location
Default templates for sheet creation and page setup overrides
■ Texture maps search path (all three paths should be replaced by the install
path values with proper sub folders)
Along with defining search paths and file location, can
files be added?
Using the Add button, you can set paths to folders where files are stored. You
cannot add specific files.
Where can I check if service packs are available for my
software?
To find out if a patch or Service Pack is available for your product, visit
AutoCAD Support page at http://autodesk.com/servicesandsupport.
How do I extract an MSP file?
A Microsoft Patch (MSP) file is usually contained in a Service Pack executable
that you download from AutoCAD Support website. To extract the MSP file
from the executable, run the patch program from the Windows command
prompt using the /e switch.
Pay particular attention to the location where the files are extracted. For details
about using the patch file, review the Readme file for that patch.
82 | Appendix E Installation Troubleshooting
Can Online Resource settings be modified later?
Yes. If you want to change the state of online resources after a product is
installed, you can do that from the CAD Manager Control utility. The CAD
Manager Control utility is installed separately from AutoCAD.
From the Installation wizard, select Install Tools and Utilities and then select
the CAD Manager Control utility. After installation is complete, you can open
the utility from the Start menu. Do one of the following:
■ (Windows XP or Windows Vista) click All Programs ➤ Autodesk ➤ CAD
Manager Tools ➤ CAD Manager Control Utility.
Where can I learn about InfoCenter?
You can use InfoCenter to enter a question for help, display the
Communication Center panel for product updates and announcements, or
display the Favorites panel to access saved topics. For more information, refer
to Configure InfoCenter Communication Center (optional) on page 33.
What are information channels?
The Communication Center component of InfoCenter allows you to receive
announcements from various information channels. Through information
channels, you can receive the following:
■ Product Support information, including maintenance patch notifications.
■ Subscription Center announcements and subscription program news, as
well as links to e-Learning Lessons, if you are an Autodesk subscription
member.
■ Notifications of new articles and tips posted on Autodesk websites.
What are the benefits to enabling CAD Manager
Channels?
CAD Manager Channels allow access to Internet-based content and information
feeds from a specified feed location.
Can Online Resource settings be modified later? | 83
What are RSS feeds and how do they benefit my
installation?
An RSS feed is a live link you initiate by subscribing to someone’s website.
Once subscribed, the primary benefit is a constantly updating stream of content
that is delivered to your system in the form of summarized articles, forum
threads, blog posts, and so on. RSS stands for Rich Site Summary (or Really
Simple Syndication).
Where can I learn about InfoCenter search locations?
You can use InfoCenter to search multiple sources (for example, Help and
specified files) at one time, or choose to search a single file or location.
For more information, refer to Configure InfoCenter Communication Center
(optional) on page 33.
How do I set or customize search locations?
InfoCenter Search and Communication Center settings can be set in the
InfoCenter Settings dialog box or in the CAD Manager Control utility. You
must use the CAD Manager Control utility to specify CAD Manager Channel
settings.
See Configure InfoCenter Communication Center (optional) on page 33 for
more information regarding the settings you can configure.
Licensing Issues
This section outlines common issues and their solutions with regards to
software licenses and licensing your product(s).
What is the difference between a stand-alone license
and a network license?
Stand-alone licensed products are registered and activated to an individual
workstation. While the software can be installed on multiple systems in your
facility, the license only allows one system to be operational. If you need to
84 | Appendix E Installation Troubleshooting
run more systems, you need to purchase more stand-alone licensed products,
or consider converting to network licenses.
Network licensed products rely on the Network License Manager to keep track
of software licenses. The software can be installed and run on multiple systems,
up to the maximum number of licenses you’ve purchased. The Network License
Manager “checks out” licenses until they are all in use. No further systems
can run the program until a license is “checked in.” If you need to run more
systems, you can purchase additional licenses for the Network License Manager
to maintain.
What is the benefit of using a network licensed version
of the software?
Network licensed products are recommended for large drafting/design facilities,
classrooms, and lab environments. The main advantage is that you can install
products on more systems than the number of licenses you have purchased
(for example, purchasing 25 licenses but installing on 40 workstations). At
any one time, products will run on the maximum number of systems for
which you have licenses. This means you get a true floating license. If software
needs to be run on more systems, additional licenses can be purchased.
Registration and activation occurs only once and the licenses are maintained
on your Network License Server.
What is Internet Explorer used for?
After installing your product, you can operate in trial mode for a given number
of days. Whenever you launch the program, you are prompted to activate the
software. When you choose to activate the software, Internet Explorer makes
this process much faster. Once you entered your registration data and submit
it to Autodesk, an activation code is returned and you are not prompted again
during startup.
Networking Issues
This section outlines common issues and their solutions with regards to
performing a network installation or configuring your network license server(s).
What is the benefit of using a network licensed version of the software? | 85
When installing tools and utilities, which selections are
applicable for a multi-seat stand-alone installation?
Since a multi-seat stand-alone licensed product does not rely upon a license
server to manage or activate the license, the only tool that is beneficial is the
Autodesk CAD Manager tool.
You need the CAD Manager tool if you want to make changes to CAD Manager
Channels.
When installing tools and utilities, which selections are
applicable for a stand-alone installation?
The Autodesk CAD Manager tool is the only tool that is beneficial to a
stand-alone licensed product. With the CAD Manager tool, you can modify
CAD Manager Channels.
Where do I find my server name?
When installing a network licensed product, you must specify the name of
the server that will run the Network License Manager. If you don’t know the
server name, you can quickly find it by opening a Windows command prompt
on the system that will be the Network License Manager. At the prompt, enter
ipconfig /all and note the Host Name entry.
When specifying user workstation settings, I am given
the option to specify a profile. What are profiles?
Profiles are created on the Profiles tab of the Options dialog box. Profiles can
contain configuration settings for just about anything that is not a drawing
based system variable. For example, a profile can contain things like support
paths, grip settings, and plot settings.
When you specify a profile on the Specify User Preferences page during the
deployment process, it ensures that all workstations that use that deployment
to install the product will be configured the same way.
86 | Appendix E Installation Troubleshooting
Can I create custom desktop shortcuts?
You can choose to create custom desktop shortcuts that use command line
switches to specify several options when you start the program. For example,
command line switches can be set to run a script during program launch,
create a drawing based on a template or prototype drawing, or designate a
workspace that should be restored on startup.
For more information, see Customize Startup in the AutoCAD User’s Guide.
What happens when you choose to append or merge
service packs?
When you append a service pack, the service pack is applied to the current
deployment only. Multiple service packs may be appended to a deployment.
The service pack file is included in the deployment and the service pack is
applied after the product is deployed.
When you merge a service pack, the service pack is merged into the
administrative image. Once merged, a service pack may not be removed from
the administrative image. Multiple service packs may be included in a single
administrative image.
You can choose to append or merge service packs from the Include Service
Packs page when creating a deployment.
What is an administrative image (MSI) file?
An administrative image is a collection of shared file resources created during
the deployment process and is used by deployments to install the program to
networked workstations. Service packs (patches) can be applied to an
administrative image when you create the deployment. A .msi file is a Microsoft
Installer file.
What is the impact of selecting all products for the
administrative image, and can I add products later?
If you elect to include all products in your deployment, the administrative
image will be larger. You should select all products only when you create
multiple deployments from this image and prefer not to use the installation
Can I create custom desktop shortcuts? | 87
disc. If there are products you rarely or never use, and you do not expect to
create additional deployments, you should only select a subset of products.
You can still create a deployment at a later date, and include additional
products, but you need to create a new administrative image. You need the
installation disc to do so.
Uninstall and Maintenance Issues
This section outlines common issues and their solutions with regards to adding
and removing features, reinstalling or repairing your installation, and
uninstalling products.
When adding or removing features, how can I tell what
features get installed by default?
To quickly see what gets installed during a typical, default installation, click
the Restore Defaults button on the Add/Remove Features page.
CAD Standards
Drawing Encryption
Express Tools
Autodesk Impression
Toolbar
Autodesk Seek
Contains tools for reviewing design files for compliance with
your standards.
Contains database access tools.Database
Contains multi-language dictionaries.Dictionaries
Allows you to use the Security Options dialog box to protect
a drawing with a password.
Contains AutoCAD support tools and utilities (not supported
by Autodesk).
Contains AutoCAD fonts and TrueType fonts.Fonts
The Impression toolbar allows you to quickly export any view
to Autodesk Impression for advanced line effects.
Autodesk Seek.
NOTE Seek will only be installed in the English version of
AutoCAD.
88 | Appendix E Installation Troubleshooting
New Features Workshop
Contains animated demos, exercises, and sample files to help
users learn the new features.
License Transfer Utility
Migrate Custom Settings
Initial Setup
Reference Manager
Allows users to transfer an Autodesk product license between
computers.
NOTE The utility will not be installed on unlocked versions of
AutoCAD.
Migrates custom settings and files from previous version of
your product to this version.
Allows users to set up their initial configuration of AutoCAD
(online content, workspaces) based on their units system, industry, and commonly used task-based tools.
Allows users to view and edit the paths of externally referenced
files associated with a drawing.
Contains various feature sample files.Samples
Contains Microsoft Visual Basic for Applications support files.VBA Support
Is it possible to change the installation folder when
adding or removing features?
Once your product is installed, you cannot change the installation path from
the Add/Remove Features page. Changing the path while adding features
results in program corruption, so it is not an option.
When should I reinstall the product instead of a repair?
You should reinstall your product if you accidentally delete or alter files that
are required by the program. Missing or altered files adversely affect the
performance of your product and cause error messages when you try to execute
a command or find a file.
If an attempt to repair an installation fails, reinstalling is the next best option.
Is it possible to change the installation folder when adding or removing features? | 89
Do I need my original disc to reinstall my software?
When performing a reinstall of the product, you do not need to have the
original disc(s) on hand. Installation data is cached locally on your drive and
that data is reused when reinstalling.
After repairing my installation, is it possible to recover
my settings?
Custom settings can be exported and later re-imported to the same system in
case you have to repair the installation of your program.
For more detailed information regarding exporting and importing custom
settings, see Migrate Custom Settings and Files from Previous Releases.
When I uninstall my software, what files are left on my
system?
If you uninstall the product, some files remain on your system such as files
you created or edited (drawings or custom menus).
Your license file also stays on your workstation when you uninstall your
product. If you reinstall on the same workstation, the license information
remains valid and you do not have to reactivate the product.
90 | Appendix E Installation Troubleshooting
Glossary
activate Part of the Autodesk software registration process, it allows you to
run a product in compliance with the product's end-user license agreement.
Active Directory A directory service from Microsoft that is part of Windows
2000 and Windows 2003 Server that manages the identities and relationships
that make up network environments.
administrative image A collection of shared file resources created by the
Deployment wizard and used by deployments to install the program to network
workstations.
advertising A pull technology that notifies users of an updated software
product that is available for installation. Users typically double-click a shortcut
(or do a similar operation) to complete the installation of the advertised
product.
Autodesk product startup accelerator (acstart17.exe) A runtime process that
can accelerate the initial startup of AutoCAD.
deploy The process of installing an Autodesk product to one or more
computers on a network.
deployment A link to a unique MST (Microsoft Transform) file that serves as
a basis for an installation. Using the Deployment wizard, administrators can
create multiple deployments that result in different types of installations for
users.
directory service A network service that identifies all resources on a network
and makes them accessible to users and applications. Resources include email
addresses, computers, and peripheral devices such as printers. Ideally, the
directory service should make the physical network topology and protocols
transparent so that a user on a network can access any resource without
knowing where or how it is physically connected. Virtually all directory services
are based on the X.500 ITU standard.
FLEXnet License management technology from Acresso Software, Inc. FLEXnet
provides administrative tools that help to simplify management of network
Glossary | 91
licenses. FLEXnet can be used to monitor network license status, reset licenses
lost to a system failure, troubleshoot license servers, and update existing license
files.
group policy Microsoft server technology that provides a way to do push
installations and advertising-based installations using standard Microsoft 2000
Server administration components.
installation image A deployment that consists of an MSI file, any associated
transforms, additional user-specified custom files, and profile and registry
settings.
language pack Provides for installation of a core product plus a language of
choice. A pack consists of the localized content of a program, plus installer
files.
License Transfer utility Allows you to use an Autodesk product on more than
one computer without purchasing a separate license for each computer.
MSI Microsoft installer that supports a variety of parameters that can be
scripted.
MSP Microsoft patch file (see patch).
MST Microsoft transform file. Modifies the components installed by the MSI
file. For example, the Deployment wizard creates an MST file with the settings
that you specify. The deployment created by the Deployment wizard uses the
MST file in conjunction with the MSI file and MSIEXEC to install the program
on local workstations.
92 | Glossary
multi-seat stand-alone installation A type of installation where multiple
stand-alone seats of the program are installed using a single serial number.
network license installation A type of installation where you install the
program to workstations with the files and registry entries that allow the
program to communicate with the Network License Manager.
partial profile A profile that contains partial registry information
corresponding to a subset of the options available from the Files tab of the
Options dialog box.
patch A software update to an application.
power user A user with rights to access and write to the Program Files folder
and the HKEY_Local_Machine folder of the registry.
pull technology An installation technology that requires user interaction to
complete the installation.
push technology An installation technology that installs files to a remote
desktop without any user interaction.
SCCM Microsoft System Center Configuration Manager. A tool that helps
administer networked machines by allowing remote configuration, push
deployments, and user administration. SCCM is an expensive technology that
must be purchased as an additional server.
scripting The process of using scripting languages such as VB Script to facilitate
the deployment of software packages.
service pack Autodesk terminology for an application patch.
silent mode An installation that proceeds without any explicit user input.
No dialog boxes are presented that require interaction from the user.
transform See MST.
Glossary | 93
94
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.