Autocue WinCue LT Shuttle Controllers User Manual

Shuttle Controllers for Wincue

LT Prompters

 Autocue Ltd 2006 – All Rights Reserved

Contents

1

Introducing Shuttle Controllers 3

1.1 What Are Shuttle Controllers? ....................................................................4

1.2 Minimum PC Requirements ........................................................................4

1.3 Installing the ShuttlePro or ShuttleXpress controller ................................4

1.4 Configuring the ShuttlePro and ShuttleXpress Controllers ....................7

1.5 Technical Support.......................................................................................10

WinCue LT Shuttle Controllers Guide Introducing Shuttle Controllers •••• 2

1 Introducing Shuttle

Controllers

WinCue LT Shuttle Controllers Guide Introducing Shuttle Controllers •••• 3

1.1 What Are Shuttle Controllers?

Shuttle controllers are an alternative to standard Autocue Multibutton or Barrel hand

controls. They can be purchased from most reputable computer suppliers at a

relatively low cost. The shuttle controllers described in this document are the Contour

Shuttle Pro and the Contour Shuttle Xpress.

Contour ShuttlePro

Contour ShuttleXpress

1.2 Minimum PC Requirements

WinCue LT v1.5 build 1527 or higher

Prompter: IMT card ver 2.00

Windows 2000 or Windows XP Pro

1.3 Installing the ShuttlePro or
ShuttleXpress controller

IMPORTANT: DO NOT INSTALL THE DRIVERS PROVIDED WITH THE CONTROLLER.

Connect the controller to a USB port on your computer. Windows will detect the

device and install it as a “Human Interface Device”

WinCue LT Shuttle Controllers Guide Introducing Shuttle Controllers •••• 4