Autocue Softbox Kit User Manual
Specifications
Our softbox lighting kit is designed to
be used in video productions in which
the lighting subject is likely to be a
person(s).
This kit includes:
Three 4-tube dimmable fluorescent
softbox lighting heads
Three aluminium lighting head
stands
A compact travel case
Softbox Lighting Kit
A Power Cable
B On/Off Power
Switch (1)
C On/Off Power
Switch (2)
D Stand
E Umbrella Hole
F Lamp Holder x4
G Lamp Angle
Adjustment
H Stand Mounting
Bolt
I Mounting holes for
softbox rods
J Diffuser
K Light Body
L Hood with 4 rods
M Lamp
Components
F
A
B
C
D
E
G
H
I
autocue.com
M
Softbox
Lighting Kit
Guide
Heads 3
Tubes/head 4
Output (W) 4 x 160
Power (W) 4 x 32
J
L
K
Maximum
Height (cm)
Minimum
Height (cm)
Net weight
(Kg)
190 to the centre of
the head
91 to the centre of
the head
2.5
Assembly
2. When the four rods
are installed the hood
will then be formed
into a rectangular
shape.
1. Insert the four hood
rods in the mounting
holes on the rim of
the light head.
6. Stretch the diffuser
between all four corners
of the hood.
7. Ensure that the
diffuser is secured on
all four sides using
the Velcro strips.
Stand Adjustment
Open the legs by
loosening the clamp
screw and pull out to
the desired angle and
reghten the clamp
screw. (A)
A
4. Install all four lamps
into the head.
3. Ensure that the Velcro
fastenings are secure.
5. When all the lamps
are installed, to test
the unit is working plug
the unit in and switch
the unit on using the
power switches on the
rear of the head.
8. The softbox is now
complete and ready
for use.
A
9. Mount the softbox
on the top of the
stand and secure in
place using the clamp
screw. (A)
B
To adjust the height of
the stand loosen the
clamp screw and raise
the stand to the desired
height. (B)
Loading...