Australian monitor IS1600 3, IS1200 BROCHURE

AMIS IS600, IS1200,IS1600

2 RU Stereo Power Amplifi ers

At a Glance...

The Australian Monitor Installation Series IS600, IS1200 & IS1600 are 2 RU stereo power amplifi ers.

It features:

> 2RU

> dual channel 4 or 8 ohm operation

> 2 x dual speed fans

> Power, Signal, Clip & protect LED indication

> Balanced XLR/6.35mm TRS inputs

> Speakon/Binding post outputs

> 3 stage input sensitivity switch

> Stereo/parallel switch

> Ground lift switch

> IS600 2 x 300 watts @ 4 ohms

> IS1200 2 x 600 watts @ 4 ohms

> IS1600 2 x 800 watts @ 4 ohms

> Short circuit protection.

> Overload protection.

> Soft Start.

> Thermal protection

A More Thorough Examination...

The IS series continues the Australian Monitor tradition of delivering an amplifi er
packed with clever features at a contractor friendly price.

The IS600 delivers 300 watts per channel @ 4 ohms, the IS1200 delivers 600 watts per channel @ 4 ohms,

& the IS1600 deliveres 800 watts per channel. Designed for permanent installations where high quality audio

reproduction is required on a small budget, the IS series deliver the sound quality & features contractors

require. The IS series continues the Australian Monitor tradition of delivering an amplifi er packed with clever

features at a contractor friendly price.

AMIS•600-1200-1600.indd 1AMIS•600-1200-1600.indd 1 20/2/06 4:39:31 PM20/2/06 4:39:31 PM

Architecture & Engineering Specifi cations

IS600, IS1200 & IS1600

2 RU Stereo Power Amplifi ers

The amplifi er shall be 2 RU dual channel with low impedance output of 300 watts per
channel at 4 ohms/600 watts per channel @ 4 ohms/ 800 watts per channel @ 4 ohms.
The amplifi er will have two dual speed fans, short circuit, overload, soft start & thermal
protection. Have switch operable ground lift, stereo/parallel operation, input gain sensitivity.

Inputs shall be balanced XLR or 6.35mm TRS type & speaker outputs
shall be Speakon or binding post type.

The amplifi er shall be the IS600/IS1200/IS1600

IS600 Specifi cations

Output @ 8 ohms 2 x 200 watts
Output @ 4 ohms 2 x 300 watts
Frequency Response <10Hz - >50kHz (-3dB)
THD <0.03% @ 1kHz
Crosstalk 60dB
Damping Factor 250 into 8 ohms/ 125 into 4 ohms
Input Impedance 20Kohm
Signal/noise ratio >99dB 20Hz-20kHz
Weight 20KG
Shipping Dimensions (wxdxh) 635mm x 590mm x 160mm

IS1200 Specifi cations

Output @ 8 ohms 2 x 400 watts
Output @ 4 ohms 2 x 600 watts
Frequency Response <10Hz - >50kHz (-3dB)
THD <0.03% @ 1kHz
Crosstalk 60dB
Damping Factor 250 into 8 ohms/ 125 into 4 ohms
Input Impedance 20Kohm
Signal/noise ratio >105dB 20Hz-20kHz
Weight 25KG
Shipping Dimensions (wxdxh) 635mm x 590mm x 160mm

IS1600 Specifi cations

Output @ 8 ohms 2 x 500 watts
Output @ 4 ohms 2 x 800 watts
Frequency Response (-3db) <10hz - >50khz (-3dB)
THD <0.03% @1 Khz
Crosstalk 60dB
Damping Factor 250 into 8 ohms/ 125 into 4 ohms
Input impedance 20kohm
Signal/noise ratio >90dB 20Hz-20kHz
Weight 22.0KG
Shipping Dimensions (wxdxh) 483mm x 452mm x 89mm

Engineered and Distributed by AUDIO TELEX COMMUNICATIONS PTY LTD (ABN 78 001 345 482), 149 Beaconsfi eld Street, Silverwater, Sydney, NSW, 2128 Australia

NSW Tel: [phone] Fax: [phone] VIC Tel: [phone] Fax: [phone] QLD Tel: [phone] Fax: [phone] WA Tel: [phone] Fax: [phone]

SA Tel: [phone] Fax: [phone] NZ Tel: [phone] Fax: [phone] International Enquiries - [e-mail] www.australianmonitor.com.au

AMIS•600-1200-1600.indd 2AMIS•600-1200-1600.indd 2 20/2/06 4:39:50 PM20/2/06 4:39:50 PM