Australian Monitor Essentials Microphone User Manual

Page 1
SPECIFICATIONS:
Type Dynamic Microphone Polar Pattern Cardioid Frequency Response 50Hz – 16kHz Sensitivity: -39dBV/Pa (11mV/Pa) Max SPL: 132dB Dynamic Range: 106dB Phantom Power Requirement: 9-52VDC Current Draw: 3mA Output Configuration: Transformerless Output Impedance: 200 Ohms Output Connector: Gold plated 3 pin XLR male connector Dimensions: 20mm x 620mm Weight: 160g
Page 2
SPECIFICATIONS:
Type Noise Cancelling Dynamic Frequency Response 100Hz – 5kHz Sensitivity: -66dBV/Pa (0.5mV/Pa) Output Impedance: 200 Ohms Output Connector: 5 wire, bare ends White – Audio positive Black – Audio negative Drain – Audio ground Green – Switch Red - Switch Cable Length 3.4m Dimensions: 32mm x 300mm Weight: 250g
Page 3
SPECIFICATIONS:
Type: Dynamic Microphone Polar Pattern Supercardioid Frequency Response 100Hz – 15kHz Sensitivity: -77dBV/Pa (1.6mV/Pa) Max SPL: 140dB Output Impedance: 500 Ohms Output Connector: Gold plated 3 pin XLR male connector Dimensions: 32mm x 300mm Weight: 180g
Page 4
SPECIFICATIONS:
Type Condenser Microphone Polar Pattern Half Uni-directional Capsule Pressure Gradient Frequency Response 30Hz – 20kHz LPF Slope: 80Hz, 18dB/Oct Sensitivity: -44dBV/Pa (6.3mV/Pa) Max SPL: 134dB Dynamic Range: 115dB Phantom Power Requirement: 9-52VDC or 1x AAA 1.5V battery Battery Life: 1200 hours Current Draw: 2mA Output Configuration: Transformer output Output Impedance: 200 Ohms Output Connector: Gold plated 3 pin male XLR Cable Length: 10m Dimensions: 96mm x 64mm Weight: 390g
Page 5
SPECIFICATIONS:
Type Dynamic Microphone Polar Pattern Supercardioid Frequency Response 100Hz – 15kHz Sensitivity: -58dBV/Pa (1.3mV/Pa) Output Impedance: 500 Ohms Output Connector: 3 wire, bared ends Red – Audio positive Black – Audio negative Drain – Audio ground Dimensions: 32mm x 300mm Weight: 180g
Page 6
SPECIFICATIONS:
Type Dynamic Vocal Microphone Polar Pattern Supercardioid Capsule Neodynium magnet with dual membrane dome diaphragm and aluminium voice coil Frequency Response 50Hz – 16kHz Sensitivity: -53dBV/Pa (2.2mV/Pa) Max SPL: 140dB Output Configuration: Wide bandwidth transformer Output Impedance: 200 Ohms Output Connector: Gold plated 3 pin male XLR Dimensions: 53mm x 180mm Weight: 363g
Page 7
SPECIFICATIONS:
Type Condenser Microphone Polar Pattern Cardioid Capsule Pressure Gradient Frequency Response 40Hz – 18kHz Sensitivity: -34dBV/Pa (20mV/Pa) Max SPL: 126dB Dynamic Range: 101dB Phantom Power Requirement: 9-52VDC Current Draw: 3.5mA Output Configuration: Transformerless Output Impedance: 200 Ohms Output Connector: Gold plated 3 pin male XLR Cable Length: 10m Dimensions: 12mm x 27mm Weight: 210g
Page 8
Omni-Directional Boundary Microphone
Congratulations on your purchase of your Australian Monitor microphone.
The AM-BMo is an electret, omni-directional condenser boundary microphone suited to choir, theatrical, piano, acoustic and other near field mic’ing applications. Featuring a shock-mounted capsule, hardened steel mesh grill and gold plated XLR output connector the AM-BMo is well featured for the demands of a live performance environment, suited ideally for all sound reinforcement applications.
The AM-BMo also boasts a pressure gradient diaphragm providing both high sensitivity and a wide frequency response. The omni directional polar pattern and tailored frequency response ensures both natural tone reproduction and high gain before feedback, in a compact package – critical for any live performance application. The AM-BMo also features a 3 stage selectable low pass filter, rubber base to minimise vibration noise, and can be either powered by batteries or phantom power.
SPECIFICATIONS:
Type Condenser Microphone Polar Pattern Half Omni-directional Capsule Pressure Gradient Frequency Response 30Hz – 20kHz Sensitivity: -42dBV/Pa (7.9mV/Pa) Max SPL: 132dB Dynamic Range: 114dB Phantom Power Requirement: 9-52VDC or 1x AAA 1.5V battery Battery Life: 1200 hours Current Draw: 2mA Output Configuration: Transformer output Output Impedance: 200 Ohms Output Connector: Gold plated 3 pin male XLR Cable Length: 10m Dimensions: 65mm x 15mm Weight: 280g
Loading...