AUSTRALIAN MONITOR AMPAV30 Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL

ACTIVE THREE WAY

STEREO SPEAKER SYSTEM

AMPAV30

IMPORTANT SAFETY INFORMATION

PRÉCAUTIONS DURANT UTILISATION

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Use only with the bracket specified by the manufacturer, or sold with the
apparatus.

12. Unplug this apparatus during lightning storms or when unused for long

13. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.

14. This appliance shall not be exposed to dripping or plashing water and that
no object filled with liquid such as vases shall be placed on the apparatus.

15. The mains plug is used as the disconnect device and shall remain readily
accessible.

16. WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.

1. Lisez ces instructions.

2. Tenez ces instructions.

3. Notez tous les avertissements.

4. Suivez toutes les avertissements.

5. N’utilisez pas ce produit près de l’eau (la piscine, la plage, le lac, etc.).

6. Nettoyez seulement avec une étoffe sèche.

7. Ne bloquez aucuns troux de ventilation. Installez en accord avec les
instructions du manufacturier.

8. N’installez près aucunes sources de chaleur comme radiateurs, registres
de chaleur, fours ou les autres equipements (y compris amplifi cateurs) qui
produisent la chaleur.

9. Protegez le cordon de secteur contre être marchée dessus ou pincez en
particulier aux fi ches, aux douilles de onvenance, et au point où ils sortent
de l’appareil.

10. Seulement utilisez attachements/accessoires spécifi és par le
manufacturier.

11. Utilisez seulement avec un support indiquée par le manufacturier, ou
vendue avec l’appareil.

12. Arrachez la fi che du dispositif durant éclair et orage ou quand pas utilisé
pour longues périodes de temps.

13. Référez au personnel qualifi é de service pour toutes réparations.
La réparation est donnée quand le système a été endommagé à n’importe
façon, par exemple un fi l ou une fi che endommagé(e) de la source
d’alimentation. Avoir été exposé à pluie ou humidité, n’opère pas
normalement, ou avoir été tombé.

14. L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures
et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être place
sur l’objet.

15. La prise du secteur ne doit pas être obstruée ou doit être facilement
accessible pendant son utilisation.

16. AVERTISSEMENT: Pour éviter le risque d’incendie ou de chocs électriques,
ne pas exposer cet appareil à la pluie ou à l’humidité.

AMPAV30

The Australian Monitor AMPAV30 is an active three-way stereo
speaker system consisting of one powered and one passive
speaker. The speakers are compact, architecturally pleasing and
come supplied with adjustable mounting brackets.

Features include an on-board 15 W stereo amplifier, Treble, Bass
and Volume controls as well as unbalanced stereo RCA and 3.5 mm
TRS jack line inputs.

The AMPAV30 features a 5.25” bass driver, 0.5” dynamic mid-range
tweeter and a 1” piezo high frequency tweeter delivering a solid
2 x 15 watts RMS of clear, intelligible power.

The Australian Monitor AMPAV series powered speakers deliver a
new standard of high quality sound reinforcement for a variety of
audio visual applications. Compact and well designed, they are easy
to operate and are set to become the standard in many
AV installations. The speakers are available in white (AMPAV30W)
and black (AMPAV30B).

Revision 1.0 January 2013

INTRODUCTION 3

AMPAV30 FRONT PANEL– ACTIVE & PASSIVE 4

AMPAV30 REAR PANEL – ACTIVE & PASSIVE 5

MOUNTING 6

SPECIFICATIONS 7

WARNING!

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH

AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended

to alert the user to the presence of
uninsulated “dangerous voltage” within
the product’s enclosure that may be of

sufficient magnitude to constitute a risk

of electric shock to persons.

WARNING: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

ADVERTISSMENT: POUR ÈVITER LE RISQUE

D’INCENDIE OU DE CHOCS ÈLECTRIQUES,

NE PAS EXPOSER CET APPARIEL À LA PLUIE

OU À L’HUMIDITÈ.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Rating plate and caution marking are marked on the back enclosure of the apparatus

PAGE 3

AMPAV30 INSTALLATION AND OPERATION MANUAL

INTRODUCTION AND CONTENTS