AUO T320HVN04.0 Specification

T320HVN04.0 Product Specification

Rev 0.0

Model Name: T320HVN04.0

Issue Date : 2012/09/07

(＊＊＊＊)Preliminary Specifications

( )Final Specifications

Customer Signature Date AUO Date

Approved By

_________________________________

Note

Approval By PM Director

____________________________________

Reviewed By RD Director

____________________________________

Reviewed By Project Leader

____________________________________

Prepared By PM

____________________________________

CONTENTS

T320HVN04.0 Product Specification

Rev 0.0

CONTENTS................................................................................................................................................................................2

RECORD OF REVISION .........................................................................................................................................................3

1. GENERAL DESCRIPTION ............................................................................................................................................4

2. ABSOLUTE MAXIMUM RATINGS .............................................................................................................................5

3. ELECTRICAL SPECIFICATION..................................................................................................................................6

3.1

ELECTRICAL CHARACTERISTICS .................................................................................................................6

3.1.1 DC CHARACTERISTICS ................................................................................................................................6

3.1.2 AC CHARACTERISTICS ................................................................................................................................7

3.1.3 DRIVER CHARACTERISTICS ......................................................................................................................7

3.2

INTERFACE CONNECTIONS ...........................................................................................................................10

3.2.1 T-CON BOARD PIN MAP ..............................................................................................................................10

3.2.2 LVDS OPTION.................................................................................................................................................11

3.3

SIGNAL TIMING SPECIFICATION .................................................................................................................12

3.4

SIGNAL TIMING WAVEFORMS .......................................................................................................................13

3.5

COLOR INPUT DATA REFERENCE ................................................................................................................14

3.6

POWER SEQUENCE FOR LCD.........................................................................................................................15

3.7

VCOM ADJUST SOP ...........................................................................................................................................16

3.7.1 VCOM I2C TUNING STEP ............................................................................................................................16

3.7.2 FLICKER PATTERN ......................................................................................................................................16

3.7.3 WP (WRITE PROTECT) DISABLE..............................................................................................................16

3.7.4 ADJUST SOP....................................................................................................................................................17

3.7.5 INTERVAL OF STEP TO STEP .....................................................................................................................17

4. OPTICAL SPECIFICATION........................................................................................................................................18

5. MECHANICAL CHARACTERISTICS.......................................................................................................................22

6. PACKING........................................................................................................................................................................23

7. PRECAUTIONS .............................................................................................................................................................25

7.1

MOUNTING PRECAUTIONS ............................................................................................................................25

7.2

OPERATING PRECAUTIONS ...........................................................................................................................25

7.3

ELECTROSTATIC DISCHARGE CONTROL .................................................................................................25

7.4

PRECAUTIONS FOR STRONG LIGHT EXPOSURE .....................................................................................25

7.5

STORAGE .............................................................................................................................................................26

7.6

HANDLING PRECAUTIONS FOR PROTECTION FILM OF POLARIZER...............................................26

RECORD OF REVISION

T320HVN04.0 Product Specification

Rev 0.0

Version

0.0 2012/09/07 First release

Date Page Description

T320HVN04.0 Product Specification

Rev 0.0

1. GENERAL DESCRIPTION

This specification applies to the 31.5 inch Color TFT-LCD SKD model T32HVN04.0. This LCD Open Cell Unit

has a TFT active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 31.5 inch. This Open Cell

Unit supports 1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are

arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit+FRC gray

scale signal for each dot.

* General Information

Items Specification Unit Note

Active Screen Size 31.5 inch

Display Area 698.4 (H) x 392.85 (V) mm

Outline Dimension 723.585 (H) x 450.556 (V) x 1.388 (D) mm D: cell thickness

Driver Element a-Si TFT active matrix

Display Colors 8 bit + FRC Colors

Number of Pixels 1,920x1,080 Pixel

Pixel Pitch 0.36375 (H) x 0.36375 (W) mm

Pixel Arrangement RGB vertical stripe

Display Operation Mode Normally Black

Surface Treatment Anti-Glare, 3H Haze=2%

Weight 880.4 g

Rotate Function Unachievable Note 1

Display Orientation Signal input with “ABC” Note 2

Note 1: Rotate Function refers to LCD display could be able to rotate.

Note 2: LCD display as below illustrated when signal input with “ABC”.

T320HVN04.0 Product Specification

2. ABSOLUTE MAXIMUM RATINGS

The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit

Item Symbol Min Max Unit Conditions

Rev 0.0

Logic/LCD Drive Voltage VDD -0.3 14 [Volt]

Input Voltage of Signal Vin -0.3 4 [Volt]DC Note 1

Operating Temperature TOP 0 +50 [oC] Note 2

Operating Humidity HOP 10 90 [%RH] Note 2

Storage Temperature TST -20 +60 [oC] Note 2

Storage Humidity HST 10 90 [%RH] Note 2

Panel Surface Temperature PST 65 [oC] Note 3

Note 1: Duration:50 msec.

Note 2 : Maximum Wet-Bulb should be 39 and No condensation.℃

The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures

greater than 40 , the wet bulb ℃temperature must not exceed 39 .℃

Note 3: Surface temperature is measured at 50℃ Dry condition

Note 1

DC

℃

T320HVN04.0 Product Specification

Rev 0.0

3. ELECTRICAL SPECIFICATION

The T320HVN04.0 Open Cell Unit requires power input which is employed to power the LCD electronics and to

drive the TFT array and liquid crystal.

3.1 ELECTRICAL CHARACTERISTICS

3.1.1 DC CHARACTERISTICS

Parameter Symbol

Unit Note

Min. Typ. Max

LCD

Power Supply Input Voltage VDD 10.8 12 13.2 VDC

Power Supply Input Current IDD -- 0.56 0.62 A 1

Power Consumption PC -- 6.72 8.2 Watt 1

Value

Inrush Current I

Permissible Ripple of Power Supply Input Voltage

Input Differential Voltage

-- -- TBD A 2

RUSH

VRP -- -- VDD * 5% mV

∣

V

∣

ID

200 400 600 mVDC 4

pk-pk

3

Differential Input High Threshold

LVDS

Interface

Voltage

Differential Input Low Threshold

VTH +100 -- +300 mVDC 4

VTL -300 -- -100 mVDC 4

Voltage

CMOS

Interface

Input Common Mode Voltage V

Input High Threshold Voltage

Input Low Threshold Voltage

1.1 1.25 1.4 VDC 4

ICM

VIH

(High)

VIL

(Low)

2.7 -- 3.3 VDC 5

0 -- 0.6 VDC 5

T320HVN04.0 Product Specification

Rev 0.0

3.1.2 AC CHARACTERISTICS

Parameter Symbol

LVDS Interface

Receiver Clock : Spread Spectrum Modulation range

Receiver Clock : Spread Spectrum Modulation frequency

Receiver Data Input Margin Fclk = 85 MHz Fclk = 65 MHz

Fclk_ss

Fss

tRMG

3.1.3 DRIVER CHARACTERISTICS

Item Symbol Min Max Unit Condition

Driver Surface Temperature DST 100

Note : Any point on the driver surface must be less than 100

Value

Min. Typ. Max

Fclk

-3%

30

-0.4

-0.5

℃℃℃℃ under any conditions.

under any conditions.

under any conditions. under any conditions.

--

[℃]

Fclk

+3%

200

0.4

0.5

Unit Note

MHz

KHz

ns

Note

6

7

Note :

s

µ

1. Test Condition:

(1) V

= 12.0V

DD

(2) Fv = 60Hz (3) Fclk= Max freq. (4) Temperature = 25 ℃ (5) Typ. Input current : White Pattern

Max. Input current: Heavy loading pattern defined by AUO

2. Measurement condition : Rising time = 400us

90%

T320HVN04.0 Product Specification

Rev 0.0

VVVV

DD

DDDD

GND

GNDGND

10%

3. Test Condition:

(1) The measure point of V

is in LCM side after connecting the System Board and LCM.

RP

(2) Under Max. Input current spec. condition.

4. V

= 1.25V

ICM

L V D S -

V

IC M

L V D S +

G N D

0 V

400

400400

|VID|

V

T H

|VID|

V

T L

|VID|

5. The measure points of V

and V

IH

are in LCM side after connecting the System Board and LCM.

IL

T320HVN04.0 Product Specification

6. LVDS Receiver Clock SSCG (Spread spectrum clock generator) is defined as below figures.

1111////FFFF

SS

SSSS

Fclk

Fclk____ss

FclkFclk

7. Receiver Data Input Margin

ss((((max

ssss

Fclk

FclkFclk

Fclk

Fclk____ss

FclkFclk

ss((((min

ssss

max))))

maxmax

min))))

minmin

Rev 0.0

Parameter Symbol

Min Type Max

Input Clock Frequency Fclk Fclk (min) -- Fclk (max) MHz

Input Data Position0 tRIP1 -|tRMG| 0 |tRMG| ns

Input Data Position1 tRIP0 T/7-|tRMG| T/7 T/7+|tRMG| ns

Input Data Position2 tRIP6 2T/7-|tRMG|

Input Data Position3 tRIP5 3T/7-|tRMG|

Input Data Position4 tRIP4 4T/7-|tRMG|

Input Data Position5 tRIP3 5T/7-|tRMG|

Input Data Position6 tRIP2 6T/7-|tRMG|

Rating

Unit

2T/7 2T/7+|tRMG| ns

3T/7 3T/7+|tRMG| ns

4T/7 4T/7+|tRMG| ns

5T/7 5T/7+|tRMG| ns

6T/7 6T/7+|tRMG| ns

tRIP2

tRIP3

tRIP4

tRIP5

Note

T=1/Fclk

tRIP6

tRIP0

tRIP1 LVDS-Rx Input Data

Rx1 Rx0 Rx6 Rx5 Rx4 Rx3 Rx2 Rx1 Rx0 Rx6Rx2Rx3

LVDS-Rx

VVVV

=

= 0000VVVV

= =

diff

Input Clock

diff diff

1/Fclk=T

No connection (for AUO test only. Do

T320HVN04.0 Product Specification

3.2 INTERFACE CONNECTIONS

3.2.1 T-CON BOARD PIN MAP



LCD connector: FI-RE51S-HF (JAE, LVDS connector)



Mating connector:

PIN Symbol Description PIN Symbol Description

Rev 0.0

1

2

3

4

5

6

7

8

9

10 CH1_0- LVDS Channel 1, Signal 0- 35

11 CH1_0+ LVDS Channel 1, Signal 0+ 36 CH2_3+ LVDS Channel 2, Signal 3+

12 CH1_1- LVDS Channel 1, Signal 1- 37

13 CH1_1+ LVDS Channel 1, Signal 1+ 38 CH2_4+ LVDS Channel 2, Signal 4+

14 CH1_2- LVDS Channel 1, Signal 2- 39

15 CH1_2+ LVDS Channel 1, Signal 2+ 40

VDD Power Supply, +12V DC Regulated 26 CH2_0+ LVDS Channel 2, Signal 0+

VDD Power Supply, +12V DC Regulated 27

VDD Power Supply, +12V DC Regulated 28 CH2_1+ LVDS Channel 2, Signal 1+

VDD Power Supply, +12V DC Regulated 29

VDD Power Supply, +12V DC Regulated 30 CH2_2+ LVDS Channel 2, Signal 2+

N.C.

not connect)

GND Ground 32 CH2_CLK-

GND Ground 33 CH2_CLK+

GND Ground 34

31

CH2_1- LVDS Channel 2, Signal 1-

CH2_2- LVDS Channel 2, Signal 2-

GND Ground

LVDS Channel 2, Clock -

LVDS Channel 2, Clock +

GND Ground

CH2_3- LVDS Channel 2, Signal 3-

CH2_4- LVDS Channel 2, Signal 4-

GND Ground

SCL EEPROM Serial Clock

16

17 CH1_CLK-

18 CH1_CLK+

19

20 CH1_3- LVDS Channel 1, Signal 3- 45 Reserve TV Set reserved

21 CH1_3+ LVDS Channel 1, Signal 3+ 46 Reserve TV Set reserved

22 CH1_4- LVDS Channel 1, Signal 4- 47 Reserve TV Set reserved

23 CH1_4+ LVDS Channel 1, Signal 4+ 48 Reserve TV Set reserved

24

25 CH2_0- LVDS Channel 2, Signal 0- 50 Reserve TV Set reserved

GND Ground 41

LVDS Channel 1, Clock - 42 Reserve TV Set reserved

LVDS Channel 1, Clock + 43

GND Ground 44 LVDS_SEL

GND Ground 49

51

SDA EEPROM Serial Data

WP

Reserve TV Set reserved

N.C.

EEPROM Write Protection

High(3.3V) for Writable,

Low(GND) for Protection

Open/High(3.3V) for NS,

Low(GND) for JEIDA

No connection (for AUO test only. Do not

connect)

T320HVN04.0 Product Specification

Rev 0.0

3.2.2 LVDS OPTION

 LVDS Option = High/OpenNS

P re v io us C yc le C u r re nt C yc le N ex t C yc l e

P re v io us C yc le C u r re nt C yc le N ex t C yc l e P re v io us C yc le C u r re nt C yc le N ex t C yc l e

C lo c k

C lo c kC lo c k

C H x

C H x ____ 0000 ++++

C H xC H x C H x

C H x ____ 0000 ----

C H xC H x

C H x

C H x ____ 1111 ++++

C H xC H x C H x

C H x ____ 1111 ----

C H xC H x

C H x

C H x ____ 2222 ++++

C H xC H x C H x

C H x ____ 2222 ----

C H xC H x

D EBBBB 2222BBBB 3333 BBBB 4444BBBB 5555N A

D ED E

N A D E

N AN A

N A BBBB 3333

N AN A

RRRR 0000RRRR 5555 GGGG 0000GGGG 0000RRRR 0000RRRR 1111 RRRR 2222RRRR 3333RRRR 4444 RRRR 1111

GGGG 1111BBBB 0000 BBBB 1111BBBB 1111GGGG 1111GGGG 2222 GGGG 3333GGGG 4444GGGG 5555 GGGG 2222

BBBB 2222N A

D ED E

C H x

C H x ____ 3333 ++++

C H xC H x C H x

C H x ____ 3333 ----

C H xC H x

C H x

C H x ____ 4444 ++++

C H xC H x C H x

C H x ____ 4444 ----

C H xC H x

N ARRRR 6666RRRR 7777 GGGG 6666GGGG 7777BBBB 6666 RRRR 7777

N AN A

N ARRRR 8888RRRR 9999 GGGG 8888GGGG 9999BBBB 8888 RRRR 9999

N AN A

RRRR 6666BBBB 7777 N A

RRRR 8888BBBB 9999 N A

N AN A

Note: x = 1, 2, 3, 4…

 LVDS Option = LowJEIDA

P re vio u s C yc le C u r r e nt C yc le N ex t C yc le

P re vio u s C yc le C u r r e nt C yc le N ex t C yc le P re v io u s C yc le C u r r e nt C yc le N ex t C yc le

C lo c k

C lo c kC lo c k

C Hx

C Hx ____ 0000 ++++

C HxC Hx

C Hx

C Hx ____ 0000 ----

C HxC Hx

C Hx

C Hx ____ 1111 ++++

C HxC Hx

C Hx

C Hx ____ 1111 ----

C HxC Hx

RRRR 4444RRRR 9999 GGGG 4444GGGG 4444RRRR 4444RRRR 5555 RRRR 6666RRRR 7777RRRR 8888 RRRR 5555

GGGG 5555BBBB 4444 BBBB 5555BBBB 5555GGGG 5555GGGG 6666 GGGG 7777GGGG 8888GGGG 9999 GGGG 6666

C Hx

C Hx ____ 2222 ++++

C HxC Hx

C Hx

C Hx ____ 2222 ----

C HxC Hx

C Hx

C Hx ____ 3333 ++++

C HxC Hx

C Hx

C Hx ____ 3333 ----

C HxC Hx

C Hx

C Hx ____ 4444 ++++

C HxC Hx

C Hx

C Hx ____ 4444 ----

C HxC Hx

D EBBBB 6666BBBB 7777 BBBB 8888BBBB 9999N A

D ED E

N ARRRR 2222RRRR 3333 GGGG 2222GGGG 3333BBBB 2222 RRRR 3333

N AN A

N ARRRR 0000RRRR 1111 GGGG 0000GGGG 1111BBBB 0000 RRRR 1111

N AN A

N A D E

N AN A

N A BBBB 7777

N AN A

BBBB 6666N A

RRRR 2222BBBB 3333 N A

RRRR 0000BBBB 1111 N A

D ED E

N AN A

Note: x = 1, 2, 3, 4…

T320HVN04.0 Product Specification

Rev 0.0

3.3 SIGNAL TIMING SPECIFICATION

This is the signal timing required at the input of the user connector. All of the interface signal timing should be

satisfied with the following specifications for its proper operation.

Timing Table (DE only Mode)

Signal Item Symbol Min. Typ. Max Unit

Period Tv

Vertical Section

Active Tdisp (v)

Blanking Tblk (v)

Period Th

Horizontal Section

Active Tdisp (h)

Blanking Tblk (h)

Clock Frequency Fclk=1/Tclk

Vertical Frequency Frequency Fv

Horizontal Frequency

Notes:

(1) Display position is specific by the rise of DE signal only.

Horizontal display position is specified by the rising edge of 1st DCLK after the rise of 1st DE, is displayed on the

left edge of the screen.

(2)Vertical display position is specified by the rise of DE after a “Low” level period equivalent to eight times of

Frequency Fh

1100 1125 1480

1080

20 45 400

1030 1100 1325

960

70 140 365

50 74.25 82

47 60 63

60 67.5 73

Th

Tclk

MHz

Hz

KHz

horizontal period. The 1st data corresponding to one horizontal line after the rise of 1st DE is displayed at the top

line of screen.

(3)If a period of DE “High” is less than 1920 DCLK or less than 1080 lines, the rest of the screen displays black.

(4)The display position does not fit to the screen if a period of DE “High” and the effective data period do not

synchronize with each other.

3.4 SIGNAL TIMING WAVEFORMS

T320HVN04.0 Product Specification

Rev 0.0

CH2

Pixel

M-6

Pixel

M-4

Pixel

M-2

Pixel

M

Invalid Data

Pixel

2

Pixel

4

Pixel

6

Pixel

8

Pixel

10

Pixel

12

CH1

Pixel

M-7

Pixel

M-5

Pixel

M-3

Pixel

M-1

Invalid Data

Pixel

1

Pixel

3

Pixel

5

Pixel

7

Pixel

9

Pixel

11

DE

Tdisp(h) Tblk(h)

CLK

RGB

Data

Line

N

Tclk

Invalid Data Invalid Data

Line

1

Line

2

Th

Line

3

Line

4

DE

Th

Tv

Tdisp(v)Tblk(v)

Pixel

M-4

Pixel

M-2

Pixel

M

Invalid Data

Pixel

2

Pixel

4

Pixel

M-5

Pixel

M-3

Pixel

M-1

Invalid Data

Pixel

1

Pixel

3

Line

N

N L in e

N L in eN L in e

M

M p

p

p i

i

x

x e

e

e l

l

Basic

T320HVN04.0 Product Specification

Rev 0.0

3.5 COLOR INPUT DATA REFERENCE

The brightness of each primary color (red, green and blue) is based on the 8 bit+FRC gray scale data input for the

color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data

input.

COLOR DATA REFERENCE

Input Color Data

Color

Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Red(1023) 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Green(1023) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0

Blue(1023) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1

Color

Cyan 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Magenta 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1

Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0

White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

RED(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

RED(001) 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

R

----

RED(1022) 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

RED(1023) 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

MSB LSB

R9 R8 R7 R6 R5 R4 R3 R2 R1 R0 G9 G8 G7 G6 G5 G4 G3 G2 G1 G0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0

RED

MSB LSB

GREEN

BLUE

MSB LSB

GREEN(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

GREEN(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0

G

----

GREEN(1022) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0

GREEN(1023) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0

BLUE(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

BLUE(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1

B

----

BLUE(1022) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0

BLUE(1023) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1

3.6 POWER SEQUENCE FOR LCD

T320HVN04.0 Product Specification

Rev 0.0

Pow er S u p p ly F or LC D

Pow er S u p p ly F or LC D Pow er S u p p ly F or LC D VD D

VD D (+

(+ 12

(+(+

12 VVVV ))))

1212

G ND

VD D VD D

In ter face Sig n a l

In ter face Sig n a lIn ter face Sig n a l ((((LV DS D ata

LV DS D ata &

LV DS D ata LV DS D ata

& C LK

CLK ))))

& &

CLKCLK

G ND

Back lig h t o n

Back lig h t o n ////o ff

Back lig h t o nB a ckligh t o n co n tro l s ig na l

co n tro l s ig na l

co n tro l s ig na lco n tro l s ig na l ((((VBLO N

VBLO N ))))

VBLO NVBLO N

off

offo ff

GN D

CM O S Inte rf ace S i gnal

CM O S Inte rf ace S i gnalCM O S Inte rf ace S i gnal ((((L V DS

LVD S ____SE L

SE L ,,,,....... )

SE LS E L

....... )

....... )....... )

G ND

LVD SL V DS

Parameter

t1 0.4 --- 30 ms

10 %

90 %

t1

t2

Valid D ata

Valid D ataV alid Da ta

t3 t4

t8 t9

Values

Min. Type. Max.

90 %

10 %

t6

t5

10 %

t7

Unit

t2 0.1 --- 50 ms

t3 450 --- --- ms

t4 0*1 --- --- ms

t5 0 --- --- ms

t6 --- --- ---*2 ms

t7 500 --- --- ms

t8

10*3

--- 50 ms

t9 0 --- --- ms

Note: (1) t4=0 : concern for residual pattern before BLU turn off. (2) t6 : voltage of VDD must decay smoothly after power-off. (customer system decide this value) (3) When CMOS Interface signal is N.C. (no connection), opened in Transmitted end, t8 timing spec can be

negligible.

3.7 VCOM ADJUST SOP

3.7.1 VCOM I2C TUNING STEP

Switch

T320HVN04.0 Product Specification

Rev 0.0

to Flicker Pattern

Check Flicker

3.7.2 FLICKER PATTERN

□ Dot

Green (L128)

G B R G

R

R G B R G B R G B R G B

B R G

B

WP

Disable

Reset

□ 1+2Dot

Green (L128)

Reset

Write

VCOM

Green (L128)

Read

VCOM

Adjust VCOM

■ 2Dot

□ V-stripe

Green (L128)

G B R G

R

R G

B R G

R G B R G B R G B R G B

B R G

B R

B

G B

3.7.3 WP (WRITE PROTECT) DISABLE

Disable Enable Default (NC)

□

■

L H H

H L L

3.7.4 ADJUST SOP

Step1 Reset

Step2 Read VCOM

Step3 Adjust VCOM

T320HVN04.0 Product Specification

Rev 0.0

Step4 Write VCOM

Step5 Reset

3.7.5 INTERVAL OF STEP TO STEP

Step to step interval must follow below figure

T320HVN04.0 Product Specification

Rev 0.0

4. OPTICAL SPECIFICATION

Optical characteristics are determined after the open cell unit and light source has been ‘ON’ and stable for

approximately 45 minutes in a dark environment at 25°C. The values specified are at an approximate distance

50cm from the LCD surface at a viewing angle of φ and θ equal to 0°.

Fig.1 presents additional information concerning the measurement equipment and method.

SR3 or equivalent

Parameter Symbol

Contrast Ratio CR 3200 4000 -- 1, 2

White Variation δ

Response Time (G to G)

Center Transmittance T%

Color Chromaticity 5

Red RX 0.658

RY 0.324

Green GX 0.268

GY 0.596

Blue BX 0.139

BY 0.095

White WX 0.297

WHITE(9P)

Tγ -- 6.5 -- Ms 4

Standard light source “C”

Condition

Min. Typ. Max

-- -- 1.33 1, 3

With AUO Module

4.5 % 1, 7

With CS-1000T

Typ.-0.03

Values

Unit Notes

Typ.+0.03

WY

Viewing Angle 1, 6

x axis, right(φ=0°) θr -- 89 -- degree

x axis, left(φ=180°) θl -- 89 -- degree

y axis, up(φ=90°) θu -- 89 -- degree

y axis, down (φ=270°) θd

With AUO Module

-- 89 -- degree

0.348

3

5 6

Note:

1. Light source here is the BLU of AUO T320HVN01.2 module.

2. Contrast Ratio (CR) is defined mathematically as:

Contrast Ratio=

Surface Luminance of

L

on5

L

off5

3. The white variation, δWHITE is defined as:

T320HVN04.0 Product Specification

Rev 0.0

δ

WHITE(9P)

H/2

H/6

= Maximum(L

1

4

7

on1

, L

on2

,…,L

V

2

8

)/ Minimum(L

on9

V/2 V/6

on1

, L

on2

,…L

H

on9

)

4. Response time Tγ is the average time required for display transition by switching the input signal for five

luminance ratio (0%,25%,50%,75%,100% brightness matrix) and is based on Fv=60Hz to optimize.

Target Measured

Response Time

0%

25%

Start

50%

75%

100%

The response time is defined as the following figure and shall be measured by switching the input signal for “any level of gray(bright) “ and “any level of gray(dark)”.

0% 25% 50% 75% 100%

0% to 25% 0% to 50% 0% to 75% 0% to 100%

25% to 0% 25% to 50% 25% to 75% 25% to 100%

50% to 0% 50% to 25%

75% to 0% 75% to 25% 75% to 50%

100% to 0% 100% to 25% 100% to 50% 100% to 75%

50% to 75% 50% to 100%

75% to 100%

T320HVN04.0 Product Specification

FIG.3 Response Time

Any level of gray (Bright) Any level of gray (Dark) Any level of gray (Bright)

Rev 0.0

0% , 25%, 50% , 75%, 100%

0% , 25%, 50% , 75%, 10 0%

Photodetector

Output

0% , 25%, 50% , 75%, 100%

Tim e

T

(F)

γγγγ

5. Light source here is the standard light source “C” which is defined by CIE and driving voltages are based on

suitable gamma voltages. The calculating method is as following：

A. Measure the “Module” and “BLU” optical spectrums (W, R, G, B).

T

γγγγ

(R)

B. Calculate cell spectrum from “Module” and “BLU” spectrums.

C. Calculate color chromaticity by using cell spectrum and the spectrum of standard light source “C”.

6. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the

horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For

more information see FIG4.

FIG.4 Viewing Angle

7. Definition of Transmittance (T%):

T320HVN04.0 Product Specification

Rev 0.0

module LCD of Luminance

nceTransmitta ∗=

%001

backlight of Luminance

During transmittance measurement, the backlight of LCD module contains no brightness enhancement film.

Two diffuser sheets which diffuse the light source uniformly are suggested to use for transmittance

measurement.

5. MECHANICAL CHARACTERISTICS

T320HVN04.0 Product Specification

Rev 0.0

6. PACKING

Open cell shipping label (35*7mm)

T320HVN04.0 Product Specification

Rev 0.0

XXXXXXXXXXXX – XXXXX – XXXX – XXXXXXXXXX

1. S/N Number

2. AUO internal use

3. Manufactured week

4. Model name

Carton Label:

T320HVN04.0

91.32T37.000

XXXXX–XXXXX–XXXXX

Carton label location

T320HVN04.0 Product Specification

Rev 0.0

Packing Process:

EPE Spacer

Open Cell

Hybrid Box

9 pcs of SKD & 10 pcs of spacers per 1 box

EPP Top Cover

Pallet Dimension：1200 x 1000 x145 mm

24 Boxes/Pallet, after stack 24boxes, then put EPP top cover on it.

PP Box : 880(L)mm*595(W)mm*86(H)mm

Pallet : 1200mm*1000mm*145mm

T320HVN04.0 Product Specification

7. PRECAUTIONS

Please pay attention to the followings when you use this TFT LCD Open Cell unit.

7.1 MOUNTING PRECAUTIONS

(1) You should consider the mounting structure so that uneven force (ex. Twisted stress) is not applied to the cell. And the frame on which a cell is mounted should have sufficient strength so that external force is not transmitted directly to the cell.

(2) Please attach the surface transparent protective plate to the surface in order to protect the polarizer. Transparent protective plate should have sufficient strength in order to the resist external force.

(3) You should adopt radiation structure to satisfy the temperature specification.

(3) Acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (4) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HB pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the surface of polarizer for bare hand or greasy cloth. (Some cosmetics are detrimental to the polarizer.) (5) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. Normal-hexane is recommended for cleaning the adhesives used to attach front/ rear polarizers. Do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (6) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes deformations and color fading. (7) Do not open the case because inside circuits do not have sufficient strength.

Rev 0.0

7.2 OPERATING PRECAUTIONS

(1) The open cell unit listed in the product specification sheets was designed and manufactured for TV

application

(2) The spike noise causes the mis-operation of circuits. It should be lower than following voltage:

V=±200mV(Over and under shoot voltage)

(3) Response time depends on the temperature. (In lower temperature, it becomes longer.)

(4) Brightness/transmittance depends on the temperature. (In lower temperature, it becomes lower.) And in

lower temperature, response time (required time that brightness is stable after turned on) becomes longer.

(5) Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer

or electrical contacted parts. And after fading condensation, smear or spot will occur.

(6) When fixed patterns are displayed for a long time, remnant image is likely to occur.

(7) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be

done by system manufacturers. Grounding and shielding methods may be important to minimize the

interface.

7.3 ELECTROSTATIC DISCHARGE CONTROL

Since a open cell unit is composed of electronic circuits, it is not strong to electrostatic discharge. Make

certain that treatment persons are connected to ground through wrist band etc. And don’t touch interface pin

directly.

7.4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE

Strong light exposure causes degradation of polarizer and color filter.

T320HVN04.0 Product Specification

7.5 STORAGE

When storing open cell units as spares for a long time, the following precautions are necessary.

(1) Store them in a dark place. Do not expose the open cell unit to sunlight or fluorescent light. Keep the

Rev 0.0

temperature between 5 and 35 at normal humidity.

(2) The polarizer surface should not come in contact with any other object. It is recommended that they be

stored in the container in which they were shipped.

℃ ℃

7.6 HANDLING PRECAUTIONS FOR PROTECTION FILM OF POLARIZER

The protection film of polarizer is still attached on the surface as you receive open cell units. When the

protection film is peeled off, static electricity is easily generated on the polarizer surface. This should be peeled off

slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a

condition, etc.